How to use dust pusher for cleaning training

Cleaning training dust pushing operation method is as follows:

Operation method:

1, check whether the dust pushing fiber is clean before use; Spray a small amount of electrostatic liquid on the surface of the dust pusher and spread it evenly, and check the penetration of electrostatic liquid at the same time; Check whether the position and direction of the dust pushing chuck are correct.

2. When working, start from one side and push the dust in a straight line. Dust cannot be pushed off the ground or dragged back and forth.

3. When pushing ash, each row of pushing ash should overlap with the area after pushing ash 1/4 to avoid ash leakage.

4. When the dust pusher is full of dust, shake the dust clean in a conspicuous place far away from the crowd, and then sweep the dust with a broom. You can also use a brush on the trash can before using it until the ground is completely clean.

5. When the dust pusher loses its dust adhesion ability, spray the electrostatic liquid of the wine again for reuse.

6. Repeat the above operations back and forth.

Safety precautions:

1, dust pushing is limited to dust pushing, and it is not suitable for large-area ground with more soil.

2. Don't touch doorframes, walls, etc. at work, and be careful not to touch others at the door or at the corner of stairs.

3. If there are drops of water, phlegm and other liquids on the ground, clean them with a small round mop and towel first, and then push them with dust.

4. The dust pushing fiber is dirty, and there is still no adhesion after spraying electrostatic liquid for many times, and there is still dust residue after pushing dust. When it is soaked in water, it should be cleaned in time.

5. After the dust pusher is dirty, it is best to wash it with alkaline water and soak it in washing powder. If possible, the washing effect will be better after soaking in hot water at about 40℃. After cleaning, shake off the fiber and dry it.

Benefits of cleaning training:

1, improve the hygiene knowledge of cleaning staff;

Training courses should focus on health knowledge, including common infectious diseases, garbage classification, hygiene and cleaning operation procedures, etc. Through systematic course study, cleaning staff can better master the health knowledge needed for cleaning work.

2, standardize the operation process of cleaning personnel:

Training should focus on cleaning procedures, such as sweeping the floor, mopping the floor, cleaning the glass, cleaning the bathroom, etc. Cleaning personnel should memorize the process and be able to make adjustments according to different places to ensure the quality of cleaning work.

3, improve the service consciousness of cleaning staff:

The service consciousness of cleaning staff is directly related to the improvement of customer satisfaction. Therefore, the importance of service consciousness such as carefulness, patience and enthusiasm should be emphasized in training. Understanding service awareness can help cleaning staff better meet customer needs and improve service quality.