The property electrician's high-voltage electricity room is patrolled by only one person, without insulated shoes and gloves. Can you refuse?

Yes, you must wear insulated shoes when entering the high-pressure chamber.

1, electrical maintenance personnel must hold relevant certificates and operate in strict accordance with the relevant national electrical installation procedures.

2, electrical maintenance, maintenance personnel should wear safety protection articles, equipped with electrical tools with good insulation.

3. When the distribution trunk line, transformer and low-voltage distribution box are live-wired, they should be supervised by designated personnel, and at least two people should do it. Before the start of work, the electricity must be checked to ensure that the operation can be started after the power failure.

4. Under normal circumstances, try to avoid live working. If live working is necessary due to special needs, a baffle should be installed and supervised by a special person.

5. On the operating handles of switches and knife switches that can send electricity to the work place once they are closed, the sign "No closing when someone is working" should be hung.

6, after repair or maintenance of electrical equipment or lines, through inspection, remove all safety measures, all maintenance personnel to withdraw from the job site, before sending.

7. The "Electrical Danger" sign should be hung on the fixed fence near the live equipment on both sides of the construction equipment.

Live working procedure:

1, low-voltage live-line operation should be supervised by designated personnel, and tools with insulating handles should be used to work on dry insulation. Files, metal rulers, brushes with metal objects, dusters and other tools are strictly prohibited.

2, homework personnel must wear long-sleeved overalls, gloves and safety helmet.

3, it is strictly prohibited in lightning, heavy rain, heavy snow and windy weather above level 6 for outdoor live work.

4. It is forbidden to live indoors in damp conditions.

5, high and low voltage with the same pole erection, when working on low voltage lines, should first check the distance from the high voltage line, take measures to prevent accidentally touching high voltage equipment.

6. When insulation measures are not taken for the low-voltage live conductor, the staff shall not cross it.

7, homework should first distinguish between phase line and ground wire, choose a good working position. When disconnecting wires, disconnect the phase wire first, then the ground wire, and the order of overlapping wires should be reversed. The human body must not touch two wires at the same time.