How to install eaves gutter

The gutter is used to drain water after it rains in summer. The installation of the gutter needs to be carried out according to the height of the house, and the riser needs to be installed. The position of the lower socket for abandoning the second riser needs to be grasped. There are many things that need attention during the installation process, which many owners don't understand. Here's how to install the gutter. Is the kitchen sink single or double?

First, how to install the gutter?

1. Level the installation position of the rainwater tank, and use ink lines to play lines from beginning to end.

2. Take out the rainwater tank from the packaging bag, put the rainwater tank on the ground or scaffold smoothly, install the rainwater bucket in the rainwater tank, and cut a hole with the same size as the lower outlet of the rainwater bucket with a cutting machine.

3. The distance between the outside of the riser socket and the facing should be controlled at 20-50 mm, and an inspection port should be set on the riser every 10m. If there is a B-shaped pipe, an inspection port is set at the upper part of the B-shaped pipe in this layer. The height from the center of the inspection port to the ground is 1m, and the allowable deviation is 20mm, which is higher than the upper edge of this sanitary ware 150 mm. The orientation of the inspection port should be convenient for maintenance, and the gasket of the inspection cover is generally made of rubber plate with a thickness of not less than 3 mm. ..

4. When installing the riser, be sure to aim the tee at the horizontal pipe to avoid affecting the installation quality due to the deflection of the tee. The height of the tee should be determined according to the length and slope of the horizontal pipe. The clear distance between the tee and the ground should not be less than 250 mm, but not more than 450 mm.

5. The common pipe that the riser extends upward from the roof surface is called the snorkel. Ventilation pipes cannot be connected with air ducts and flues, nor should they be located under eaves and balconies. Should be more than 0.3m higher than the roof, and should be greater than the maximum snow thickness. For a flat roof where people often stay, the ventilation pipe should be 2m higher than the roof. Ventilation pipes with doors and windows within 4m should be 600mm higher than the window top or lead to the side without doors and windows. The vent pipe outlet should be equipped with a wire mesh cover or a breathable cap. After the ventilation pipe is installed, the contact between the pipe and the roof should be waterproof.

2. Is the kitchen sink single or double?

1, if you choose a single can, it will occupy a smaller scale contrast and save kitchen space. If you choose two tanks, the scale specification will be much larger than that of a single tank, but it is also very convenient to use. If the kitchen countertop at home is too small to fit in two slots, choose a large single slot. Don't buy a small single tank. If the kitchen countertop is large in scale, whether it is a double slot or a single slot, it will not have any impact.

2. First of all, it depends on your habits. If you like to put pots and pans into the sink for cleaning, but the cabinets at home are relatively small and there is not much room for the sink, then you can choose a larger single sink. If you are used to washing vegetables or bowls with sink, choose double sink instead of single sink, which is not environmentally friendly. In addition, whether the kitchen sink is single-tank or double-tank, a big difference between the two is that half of the double-tank can be used to clean greasy things, usually used to wash vegetables, but the area of the sink is relatively small; A single sink means a large area and will not simply sprinkle water on the countertop.

The above article is about how to install eaves gutter, and whether the kitchen sink is good with single eaves gutter or double eaves gutter, which ends here. I believe this information can help you.