How to calculate the heating area

In order to ensure the comfort of living in winter, many people install floor heating in their homes, but many people don't know how to calculate the heating area, so how to calculate the heating area?

First, how to calculate the heating area

It is equal to the use area of the house and the building area of the house multiplied by 0.75, which means that the heating area is calculated according to the area shown in the property certificate. If the use size is indicated, it will be charged according to the use size. If there is only building area on the property certificate, then the heating area is multiplied by 0.75.

2. What aspects should be paid attention to in 1 year heating?

For the first time, you should suppress the water test. During the water test, you should check whether your pipes are leaking and the water pressure is insufficient. If there is a fault, you must contact the property company or heating company for maintenance immediately, and at the same time, you must ensure that the heating pipes exposed outside the room are wrapped well to avoid freezing and cracking.

3. How to use the radiator?

1. Before using the heater for the first time, do a pressure test to ensure that the heating pipe does not leak, and someone must be at home during the test, so that if there is a fault, you can apply for maintenance at the first time, reducing the probability of subsequent safety hazards.

Usually there is something wrong with the radiator, so it can't be shaken. Now most radiators are hung on the wall. If you shake them at will, they will become slack. In addition, it is forbidden to put clothes on it, otherwise it will crush the radiator.

3. If there is something wrong with the radiator, don't disassemble it privately, because it is very dangerous, which will not only lead to problems with the radiator, but also guarantee the personal safety of the owner. If you need to disassemble and refit, you'd better contact a professional.

Let me sum up: the above is the calculation method of heating area. As can be seen from the above article, the radiator should be prepared for the first 1 use. For example, the pressure test before use should not be sloppy, so as to ensure that the pipeline is watertight and reduce the probability of safety accidents. I hope I can help you.