When buying a house, what building structure and construction details should be checked to determine the quality?

You can check from the following aspects:

1, check the house for cracks.

First of all, carefully check whether there are cracks in the floor and roof of the master bedroom and living room near the terrace. It is better to have no cracks. If there are cracks, it depends on what kind of cracks. Generally speaking, although the cracks measured parallel to the room are quality problems, they are basically not dangerous and will not hinder the use after repair. If the crack is at an oblique angle of 45 degrees to the corner or perpendicular to the beam, it shows that there are serious settlement and structural quality problems in the house. Secondly, it depends on whether there are cracks in the walls on both sides of the terrace.

Joints, if there are cracks, are also serious quality problems. Finally, see if there are cracks in the load-bearing wall. If the crack runs through the whole wall and penetrates.

The back shows that there are hidden dangers in this house. For this kind of house, buyers must not take any chances.

2. Check whether the house is tilted.

Although special instruments are needed to detect the inclination of the house, buyers can basically find problems by visual inspection from different angles around and careful observation of the distance. Sometimes you can tie a heavy object on the roof with a string, stick it on the wall and put it down to the foot of the wall, and check its inclination from all sides.

3. Check the house for leakage.

Property buyers should pay attention to check the water seepage on the ground and top floor of the house and carefully check the house.

Whether there is discoloration, blistering, peeling and ash falling on the wall of the house are all signs of leakage. You should also check the kitchen and hygiene.

Whether the room and balcony top and pipe joints are leaking. It is best to accept the house after the heavy rain and ask for something before handing it over.

The staff of the company will go together, put the water in the kitchen and bathroom for a while, and come back in a couple of days to see if it leaks.

4, water supply, power supply, gas, telephone lines, closed-circuit television lines are in place. Check the verticality of strong current and weak current.

Whether the distance is more than one meter, the distance can not meet the requirements, which will affect the viewing effect of TV in the future.

5. Check the drainage system of the toilet. See if the water can be discharged to the outlet unimpeded, otherwise it will give future residence.

Bring inconvenience or increase the cost of decoration.

6. Measure whether the height of the room meets the requirements. The building height is 2.8 meters, and the actual height cannot be less than 2.6 meters.

The actual height of more than 3 meters should not be less than 2.75 meters, and the height of residential buildings should not be less than 2.8 meters. 7. Are the materials used original?

Commitment brand.