Slotting in the wall: basic tools and process guide

Slotting in the wall is a big challenge in construction, but everything can be solved as long as there are necessary tools. This paper will introduce the necessary tools and process guide for wall slotting to help you finish slotting better.

Wall grooving machine

The wall slotting machine is an effective assistant for efficient construction, which consists of a main machine and an auxiliary machine, and is responsible for slotting the wall and cleaning the dust respectively. With it, the slotting work can be completed at one time, and the efficiency is super high!

Slotting process

Before slotting, the position and quantity of switches, sockets and network cables should be listed in advance, and the wiring should be marked. Then, take out the wall grooving machine and groove along the line. After the test is completed, make sure there are no mistakes!

Matters needing attention

When slotting, the load-bearing wall should not be slotted horizontally to maintain the overall structure and seismic performance. Slotting depth and width should comply with the regulations, and parallel lines or vertical lines should be in place. Marble cutting machine assists labor to ensure that the groove line is straight and the depth is consistent.

Mend the wall

After slotting, the sundries must be cleaned up and the slots filled with mixed cement. After the cement is dried, scrape, polish and brush waterproof putty with a scraper. Brush a few more layers of putty to ensure smooth walls. Finally, paint the wall and you're done