The three main functions of tapping oil are incomparable with emulsified oil.

There are three functions of special tapping oil for tapping processing, which are functions that emulsified oil and emulsion can't reflect well, or there are defects if it is not a professional tapping oil.

Jia Wei' ao will first tell you what is tapping oil? Tapping oil, as its name implies, is a kind of lubricating oil used in tapping processing technology. Tapping oil is a kind of lubricating oil, which is mainly used in metal processing and can play the role of cooling, lubrication and excretion. Tapping oil is used for tapping teeth. What is this for? In reality, many masters have tapped teeth by hand, and they all know that tapping teeth with some oil will have high smoothness and high thread bite. It has become common sense that tapping teeth should be oiled, but it must be unclear to the boss or the operators why tapping teeth should be oiled. In fact, tapping teeth and oiling have three main functions:

First, the cooling effect: when the tap is cutting, the temperature of the tap rises sharply. If the tap is not cooled, it is easy to burn, which leads to a sharp decline in the strength of the tap and affects its durability.

Secondly, it is lubrication: when the tap is cutting, the surface of the cut thread is prone to be rough and unsmooth if no oil is added. Seriously affect the quality of thread. Third, chip removal: during tapping, a large amount of iron chips (mainly cutting taps here) will be produced, and the iron chips will easily stick to the threaded holes and the taps. At this time, tapping oil with good permeability is required to remove the processing chips, which is what many people have mentioned, especially some processing materials with poor chip removal.

? To sum up, tapping oil is an indispensable processing auxiliary material in the process of tapping. With cheap tapping oil on the surface, the quality is not guaranteed. You lose a lot of invisible costs, such as the cost of changing taps, labor costs, customer return costs and so on. Good oil will improve the efficiency of your factory, reduce your overall cost and make you more competitive than your peers. Don't refuse to make progress just because others are content with the status quo! In addition, some factories do not use tapping oil, but use other industrial oil instead, which saves costs very much, but once problems occur, the biggest consequences are unimaginable.

? Javier's heavy-duty concentrated oil essence for tapping teeth. Effectively reduce the friction between the workpiece and the tap, reduce the wear, have a strong oil film, and have a good lubrication and anti-wear backlog effect. It is applied to the lubrication of tapping, tapping, drilling, turning and thread cutting of stainless steel, alloy steel, cast iron, carbon steel and other metal materials. The most important thing is that it can improve the machining efficiency, increase the smoothness of the workpiece, and has excellent lubrication performance, which can ensure the smoothness of the cutting surface, as well as strong backlog and wear resistance, which can reduce the wear and break of the drill bit, prolong the service life of the tool and save the normal loss cost for the enterprise.