Inspector work summary and reflection

Time is like a surging torrent. It goes away and never lingers. Looking back on the work during this period, I believe you have a lot of feelings. Let’s compile the past achievements into a summary. The following is the work summary and reflection of the inspectors that I collected for everyone. It is for reference only. I hope it can help everyone.

Inspector work summary and reflection 1

20__ has passed in a tense and busy way. Looking back on the past year, I can’t help but feel a lot of emotions. This year, although there was no It was a spectacular victory, but it also went through an extraordinary period of trials and hardships. On this occasion of bidding farewell to the old and welcoming the new, our production department will make a detailed summary of the department's work and gains and losses over the past year, and at the same time pray that our company will be better next year.

1. Production and output

In the past year, the production department has shouldered the heavy burden and conducted a large number of process exploration tests. In terms of stamping: overcoming the plate shape difference of raw materials Difficulties such as the substantial improvement in customer quality standards, untimely arrival of raw materials, and temporary adjustments to customer orders have made our company's product production successfully transition from single products to simultaneous production in previous years. Tons, tons of success.

Heat treatment: According to the requirements of customers, we promptly consulted the relevant experience of manufacturers in the same industry, and boldly improved our company’s previous traditional annealing process. After a period of testing, some high-efficiency materials that we have just started to contact After processing, the product basically met the customer's requirements, and the production department also summarized a lot of valuable experience. ***Tons of completed heat treated products.

In terms of new products: The device is a newly developed product by the customer this year. In order to meet the customer's requirements in terms of output and quality, the production department faced the problem of late arrival of raw materials, messy product models, and single-variety demand. Due to the difficulties of small quantity, unstable customer orders, and frequent mold replacement, we processed tons of special products for customers, and rationally adjusted the production plan. We used our free time to develop products and complete small batch supply to customers. It has laid a good foundation for the company's product diversification in the future. In terms of initial processing and external processing of materials, _ kg of materials will be completed by *** on December 20.

2. Product quality

While completing the above-mentioned output, our production and manufacturing department also attaches great importance to product quality, strictly controls the quality of every production process, and uses regular meetings, Quality meetings, pre-shift meetings and production processes instill quality concepts into operators in a timely manner, adhering to the view that operators are the first quality inspectors. According to the turnover of operators, basic theoretical training and on-site operation practice in quality and operating skills are promptly arranged for new employees to ensure that every new operator can understand the basic product quality judgment methods before operating independently on the machine. According to the classification of product characteristics and quality requirements, a dedicated person is assigned part-time responsibility within the production department. We always believe that product quality is produced, as long as every employee in the production department has a high degree of quality awareness and puts it into every step of the production operation. During this process, product quality will be steadily improved to achieve the goal of meeting customer quality requirements.

3. Equipment and mold management

In the year 20__, the company invested money to purchase more sophisticated molds and equipment, which provided a guarantee for product output and quality. A stronger guarantee, although most of the equipment is new and has a lower failure rate. However, our equipment maintenance personnel have overcome the difficulty of weak technical strength, carried out regular maintenance and repairs on the equipment in accordance with the relevant documents for equipment maintenance, and made corresponding records and detailed equipment inspection tables, mold maintenance records, and provided detailed maintenance records for each set of equipment. The mold has established detailed files to effectively ensure the normal operation of the equipment, thereby ensuring the stability of production operations to a large extent.

4. Personnel Management

Due to the sharp increase in the company's production tasks and the diversification of product models, the company has recruited many new employees, and many batches of new employees have entered. to various production positions in the workshop, and the turnover is very large. The personnel in each position are extremely unstable, which brings great pressure to the management of all aspects of production. Driven by such pressure, the production department still firmly conducts pre-job inspections for each position. Simple on-the-job training ensures that new employees can successfully enter their job roles and become basically competent in their respective positions under the correct guidance of foremen and leaders at all levels.

5. Production safety

In the past year, based on the particularity of the industry, our production department has incorporated production safety into daily management work, and can regularly monitor Employees at each position are educated on safety knowledge, operators are trained to correctly operate production equipment, and problems are dealt with in a timely manner. However, on May 4, June 8 and October 28, vicious personal injury accidents caused by violations of operating procedures still occurred. In response to such incidents, the production department issued more frequent safety warnings to all operators. educate. Serious financial penalties and criticism warnings have been imposed on some people and things that may cause personal injury or equipment mold damage.

In the past year, under the correct leadership of the company leaders, the production department successfully passed the audit of the production department by the ISO9000 audit team, and through this activity, many things that were not done before were improved. . Each production position faced difficulties and basically successfully completed various production tasks assigned by the company. Although the production department has done a lot of work and achieved certain results, there are still many problems, mainly including the following five aspects:

1. Production site management

The production site management of each position is relatively chaotic. The main reason is that various auxiliary supplies in the production process are not arranged neatly, and the finished products and secondary products are not managed in a fixed location. In addition, the environmental sanitation, equipment sanitation, and personnel sanitation are very poor, and the operators and even the squad leader have a weak awareness of cleaning up the site when changing materials and specifications. I personally think that the solution is to strengthen on-site management, strengthen punishment measures, and arrange specific personnel for supervision and inspection.

2. Personnel management

Since most of the employees in the production department are temporarily recruited from the society, they generally have low cultural quality and a loose work attitude. In addition, the production management personnel are in specific management The laxity in the workplace has resulted in employees’ low awareness of responsibility, teamwork, and obedience to management. Late arrivals, early departures, and passive slowdowns often occur. They lack quality concepts and cost concepts, and cannot take good care of company property and save various energy sources. In this regard, we are beginning to rectify, educate, and formulate detailed rules and regulations and training plans in all aspects. We will monitor the attendance rate of operators, plan achievement rate, staff turnover rate, and production efficiency, and coordinate with the quality department to review the production process and customer feedback. Conduct detailed statistical analysis of bad information, conduct targeted training and education for employees with problems, and then conduct a series of inspections and supervision, establish and improve corresponding rules and regulations, reward and punishment measures, and continuously improve the overall quality of employees to adapt to requirements for the future development of the enterprise.

3. Equipment and mold management

Since 20__, the company has purchased more new equipment, especially the equipment imported in 20__ is still a human-machine interface, using a relatively Advanced electronic control technology. It provides great convenience for operation and mold protection, but some operators cannot take good care of the equipment and molds, and cannot detect hidden faults in time, resulting in many serious mold damage accidents, and there are few equipment and mold maintenance personnel. , unstable, weak technical force, and the maintenance of equipment and early prevention of faults are not done well. Overhauling equipment or molds often takes several days or longer to complete, and some molds have not yet met customer requirements. In the new year, the company will soon be relocating and expanding its production scale. During this period, there will be a lot of auxiliary tool manufacturing and equipment and mold debugging work, which will undoubtedly bring great pressure to the current normal production.

In this regard, I think we should immediately add full-time maintenance personnel with relevant experience, assign training to main mold maintenance personnel, improve the maintenance department, arrange direct responsible persons, and further establish a series of statistical analysis of equipment mold operation rate, failure rate, idle rate and other data Reports (such forms have been developed and specific statistical methods are being implemented), timely analysis of problems arising from equipment molds, and corresponding measures to be taken to improve existing problems so that the company's fixed asset management becomes more mature and formal.

4. Control of auxiliary supplies, material consumption and production costs

Since the material consumption of each position team was not assessed, there was a lot of waste of materials or consumption of auxiliary supplies. excessive phenomenon. The production staff's operating skills were not proficient enough, resulting in frequent bumps and falls during the transportation of raw materials, resulting in excessively long material heads and tails or product waste rates that seriously exceeded standards; because there was no fixed placement management of secondary products and auxiliary supplies, materials were replaced. The awareness of clearing out the equipment is not strong enough, resulting in some second-level products and even finished products being dumped into the garbage dump; it is also common to not turn off the power of equipment and lights when leaving get off work. In view of the current waste phenomenon, we should first start by training operators. Starting from improving the sense of responsibility and improving functional position personnel, designate areas for auxiliary supplies for production teams, arrange dedicated personnel to coordinate with on-site management and warehousing departments, follow relevant implementation measures and increase enforcement efforts, and impose corresponding financial penalties on those who violate regulations.

In terms of raw materials, the process of material transportation is implemented by dedicated personnel and a responsibility system. It is required to comply with the operating procedures of the machinery used in this link, operate it skillfully, avoid collision of materials during the transportation process, and monitor every piece of material used. Detailed records are kept; when the two shifts of statisticians take over the shift, they make detailed statistics on the operators on the shift, individual defective rates, and product waste rates; they collaborate with logistics personnel to conduct timely statistics and analysis on the utilization rate of materials and the use data of other auxiliary materials. , implement corresponding and reasonable reward and punishment measures and ideological education on saving energy and reducing costs according to the actual situation, so that the entire production process is interlocked and avoids a management vacuum. Enable personnel in these functional positions to maintain a high sense of responsibility and ownership at all times, and gradually develop good saving habits for operators. Only then will the slogan of saving every inch of material, every drop of oil, and every piece of paper advocated by the company not become An empty phrase.

5. Production safety

Production safety can be said to be one of the most important aspects of every production enterprise, and safety is a benefit. But I feel that our production department has not done enough on this point. In particular, some employees have not fully understood some relevant safety knowledge, and do not pay enough attention to some accident hazards. Even some basic safety common sense is easy to relax. . To this end, I suggest that the company should implement a regular safety meeting system and hold a company-wide safety production meeting at least once every quarter. At the same time, the human resources department should regularly conduct safety knowledge training for employees. In addition, each production team will include safety production requirements in the pre-shift meeting, so that employees can tighten the string of safety at all times, establish the concept of safety as benefit in everyone's mind, and promote the company's safety production work. Go to a new level.

Inspector work summary and reflection 2

This year is an important turning point in my life journey. Leaving school and going into society is the starting point of a new life for me, a new beginning and a new goal. The company gave me a real opportunity to practice theory. During my time at work, my colleagues cared about me very much and always gave me encouragement and help. After several months of quality inspection work, I would like to make a self-summary

First, the results of the work.

In the past few months, as a quality inspector, I have to carefully study and study the company's quality control system. According to the requirements of the job responsibilities, I have mainly gained the following results

1. Storage of physical physical samples

I strictly follow the storage requirements of the company's physical samples to ensure no leakage, no leakage, and reasonable storage of various profiles.

2. Sample testing

Inspection work is a delicate testing process, and the so-called "details determine success or failure." During the inspection work, you must always maintain a rigorous work attitude and conduct every step of the test seriously and prudently. Now I have mastered the detection methods of most material samples. I would like to thank my teachers and colleagues who taught me this.

3. Data processing

Data recording for quality inspection is also very important. I must carefully and pragmatically record the measurement data of each experiment, summarize and report the test data, and ensure that there are no false reports or false reports.

Second, thoughts and experiences at work.

1. Attitude determines everything.

Work must be meticulous and serious. You cannot always make mistakes. When necessary, you need to test your work to ensure that your work is foolproof. In my spare time, I often review my work, correct work shortcomings, improve working methods, study hard, constantly improve my work efficiency, and sum up the experience gained from past lessons. When you encounter mistakes at work, you should listen to the leadership's criticism with an open mind. Don't think that making mistakes is a shameful thing. You should think of mistakes as an opportunity for you to grow and exercise.

2. Be diligent in thinking

Although daily work is busy and tedious, and the week is relatively boring, you should not be very relaxed in your thinking during weekend breaks. You should be diligent in thinking in your spare time. Think about ways to improve the quality of your work, think about how to improve efficiency, and how to reduce working hours.

3. Continuous learning

You must constantly enrich your professional knowledge and skills to make the work at hand easier and easier.

If a person wants to make a difference in his position, he must continue to learn professional knowledge and broaden his knowledge territory. When I first entered the company, it was like a blank piece of paper that I needed to keep filling in with colors. This continued filling eventually turned me into a beautiful picture.

Third, summarize the shortcomings of your own work.

1. During work, I occasionally lose concentration and wander off. Bring unnecessary trouble to work. In the future, I will complete my work with a serious and rigorous work attitude.

2. When dealing with other people, he is often not proactive or enthusiastic. In order to complete the work as soon as possible, I often do not take the initiative to communicate with leaders and colleagues. This makes me have certain problems in handling interpersonal relationships in the company. In the future, I will take the initiative to communicate with my colleagues in a friendly manner, learn from each other, and love and help each other without delaying my work.

The above is my self-summary of the quality inspection work in the past year. Facing the new year of work, I will continue to work hard and create better work performance.

Inspector work summary and reflection 3

Time flies so fast, it has been three months since I arrived at the company. Under the guidance of the leaders and the help of colleagues, I insist on learning theoretical knowledge and am familiar with all GMP documents. Through continuous practice and continuous summary of work experience, I took over this job in just one week. So far, I have been on the job for about three months. During these three months, I have strictly abided by various rules and regulations and completed various responsibilities of my position in strict accordance with GMP requirements. On the occasion of proposing to become a full-time employee, I would like to summarize my thoughts and work situation as follows:

1. Strengthen ideological and moral construction and continuously improve my professional ethics.

As a party member, I always measure and demand my words and deeds by the standards of party members, pay attention to strengthening political cultivation, strengthening ideological and moral construction, and further improving my understanding of party spirit. It ranges from supporting the party's policies and strictly protecting the party's secrets to as small as abiding by the company's rules and regulations, strictly protecting the company's secrets, completing various tasks in strict accordance with GMP requirements, strictly abiding by inspection results, and ensuring that the data is accurate, timely, and effective. At work, I unite my colleagues, coordinate and handle the relationship between colleagues and colleagues, and between colleagues and work, and improve my thinking and professional ethics through constant strict requirements.

2. Strictly follow GMP regulations to ensure that the sampling is representative and accurate, and the samples are not contaminated.

In the eyes of many people, sampling is a trivial matter, but pharmaceutical manufacturing enterprises are different. There are regulations on the sampling amount and how to take it. Before taking samples, you must take disinfection measures and self-protection measures. For example, when you go to the workshop to take samples, you must wear protective clothing, disinfect your hands with alcohol, and disinfect sampling equipment, etc. When you go to the warehouse to take samples, you must be in the process of taking samples. Sampling in the car, etc.

3. In strict accordance with GMP regulations, the production environment and production water should be tested.

Pharmaceutical production is different from other production-type enterprises in that it has very strict requirements on the production environment and production water.

For the production environment: The wind speed, air volume, dust particles, sedimentation bacteria, and compressed air of each production room must be tested. During continuous production, the test is performed every six months (except for compressed air, it is required for each Test once a month). If production is suspended for 15 days, all indicators of the environment must be tested again. So far, the workshop environment has been tested twice and the compressed air has been tested three times.

For production water, all outlets (***15 points) of production water will be tested every 21 days (including tablet workshop, suppository workshop), and three points of the pure water station will be tested every day. detection. Test items: 14 physical and chemical indicators including properties, acidity, sulfate, calcium salt, chloride ion, nitrate, carbon dioxide, ammonia, non-volatile matter, conductivity, etc. So far, the water at the pure water station has been tested more than 60 times, and all points have been tested 4 times.

4. Strictly follow GMP regulations to check the entry of raw materials, auxiliary materials and packaging materials into the factory.

The production of pharmaceuticals is inseparable from raw materials and packaging materials. After inspection, corresponding original inspection records and inspection reports must be issued. So far, 40 batches of raw materials and packaging materials entering the factory have been tested, and 2 batches of substandard products were found (one batch was: medicinal solid hard tablets, and one batch was: nizatidine tablets instructions).

5. Strictly follow GMP regulations and conduct inspections of workshop products so as not to delay production or delivery time.

The company has long-term production of 5 types of products, each of which has intermediates, semi-finished products and finished products. And I have to take samples and test in every process to ensure quality control. After each sampling, the results must be obtained in time to avoid missing the production of the workshop. After the product comes out, a full inspection of the drug must be carried out to avoid delaying the product's delivery time. So far, intermediates and semi-finished products have been tested more than 40 times, and 13 batches of finished products have been tested.

6. Strictly follow the GMP regulations, fill in the instrument usage records, do the maintenance of the instruments and fill in the records.

In the GMP regulations, the use record of the instrument is very important. It can find out what products you have tested during a certain period of time. It is the certificate of product testing, and the maintenance of the instrument is even more important. More importantly, the good use and accuracy of the instrument are inseparable from my care, maintenance and self-calibration of the instrument. When using the instrument, you should fill in whatever you are doing at that time. The maintenance and upkeep of the instrument should be done once a month. After each maintenance and calibration, the corresponding records must be filled in.

Inspector work summary and reflection 4

One year has passed before I know it. __ is a very important year in my life. This year I ended my After four years of college career, I entered the society and started working.

Since entering the company in February XX, with the support and help of leaders and colleagues, I have better completed my essential work in accordance with the requirements of all aspects. Through this period of work and study, I found that what I learned was only a drop in the bucket, and I still lacked a lot of experience that I needed to learn and accumulate.

Inspector work summary and reflection 5

Conscientiously implement national policies and policies on standardization, quality management system, product quality supervision and inspection, and research and development at work; and truly implement the responsibilities of this position Supervise and inspect the relevant standards, test methods and relevant regulations of engineering products to ensure that every inspection done is legally based. Do a good job in order acceptance, project inspection, information, feedback, etc., and keep a tracking ledger for future reference. Since there are many test and inspection items and the project inspection time is different, the work must be done in advance to avoid the technical personnel of the construction unit not understanding the engineering inspection requirements and technical indicators, which will delay the construction period and affect the progress. Our laboratory personnel adhere to the four basic principles, implement the quality policy, implement the quality objectives, abide by the rules and regulations, and serve the construction site wholeheartedly.

After working for one year, he transferred to on-site construction management. Worked as a civil engineering technician. But he still treats the scene with a rigorous work attitude. Since the previous inspection work was quite different from on-site management work, this can be said to be both an opportunity and a challenge for me. The opportunity is to enter a small unit where the division of labor is not so clear, and you have to take charge of all on-site work; the challenge is to serve as the general technical person in charge of the site in the absence of experience and practice. In the past, we only relied on our own skills, but now we also have to do a lot of management work such as personnel arrangements and construction progress plans. The work pressure was extremely high at the time. I am always strict with myself and constantly consult experienced colleagues and teachers when I encounter problems. Compare various options to find the best method. Through their own exploration and practice, they became familiar with the work in a short period of time, completed the role transformation process, clarified the work procedures and directions, improved their work skills and management capabilities, and formed a clear work idea in specific work. Able to carry out the work smoothly and complete the job skillfully and satisfactorily.

From getting the drawings to drawing review, carefully check the details of every part, check the data, and think about the construction step plan. Have a picture in your mind. Joint review of organizational drawings. Coordinate and exchange opinions with owners, designers, and supervisors. When the project starts, carefully understand the construction details of each part. According to the requirements of the design drawings, strictly prepare the professional construction plan, prepare operation instructions for key points, and implement them after confirmation by the supervision unit. At the same time, technical and safety briefings were conducted to the team during the construction preparation process. The team was well aware of the construction content and strictly followed the construction specifications. During the construction process, the "three inspections" of team self-inspection, re-inspection, and full-time inspection shall be carried out. At the same time, quality inspection and assessment records, concealed records and related quality assurance information shall be prepared for each item. Strictly control the use of raw materials, semi-finished products and finished materials in projects.

Due to my lack of experience, I must pay more labor intensity than others. Fortunately, I have relatively solid professional knowledge during my studies. The work is also rigorous and serious. What I remember the most is that during the measurement, I found that the position of a pile with an inclined axis was 30 centimeters deviated from the axis. Since there was no as-built drawing of the pile at that time, I had to recheck it more than three times before finally confirming that the piling was wrong. The piling team also admitted that they made mistakes during construction; for example, when some caps were deepened, the owners and supervisors requested that the steel cages be increased accordingly, but the steel bars had already been laid. Based on what I have learned about the fact that concrete has strong compression resistance, I will consult the information and ask experienced masters for advice. We firmly believe that the project needs can still be met without adding additional steel bars.

As a result, I communicated with the designer to convince the owner and supervisor to save a lot of steel bars, and used my theoretical knowledge to combine with the actual situation to reduce the construction cost as much as possible while meeting the project quality; and Pouring the first floor beams and slabs separately may be a simple matter for experienced construction workers, but to be honest, it is a relatively big leap for novices. At least it can save construction materials while meeting the quality of the project. . Although it is not original, the main thing is that as a competent technician, you can take the strengths of others to make up for your own shortcomings.

Articles related to inspector work summary and reflection:

★ 2021 Quality Year-end Work Summary Template

★ The latest 10 personal work summaries and reflections for the week

★ Laboratory department summary

★ Personal work reflection summary sample in the first half of 2022

★ Ten formats for the year-end work summary of ordinary employees in 2021

★ 12 selected year-end work summary and reflection templates for 2021

★ 15 personal work summary reports for this year

★ 50 personal year-end work summary templates

★ Inspection Reflection on personal work summary of inspector

★ 3 sample essays on inspector’s internship summary