Implementation plan for resumption of production and work

#Planning# The introduction plan is a plan that is specific, thorough and highly operable in terms of purpose, requirements, methods, methods, progress, etc. The following is the implementation plan for resumption of production and work compiled by Kao.com. Welcome to read!

1. Implementation plan for resumption of production and work

In order to guide enterprises to carry out scientific and orderly prevention and control of the new coronavirus pneumonia epidemic, improve their prevention and control capabilities, and effectively prevent the occurrence and spread of the epidemic in enterprises , to protect the health and life safety of employees, maintain normal enterprise production order, and formulate this plan.

1. Establish a mechanism

(1) Implement the main responsibilities of the enterprise. It is necessary to establish an organizational structure and management system for the prevention and control of the new coronavirus epidemic. The person in charge of the enterprise shall be the first person responsible, and a special work team shall be established to be responsible for the enterprise's epidemic prevention and control work.

(2) Formulate prevention and control plans. Including leadership system, division of responsibilities, investigation system, daily management and control, logistics support, information reporting, emergency response, etc., it must be detailed and implemented in workshops and teams, and clear designated personnel are responsible.

(3) Improve the information reporting and liaison system. It is necessary to establish an information reporting mechanism with the streets (townships), health and other departments in the jurisdiction, and designate dedicated personnel to take charge. Establish an epidemic information reporting system and clarify the process and responsible persons.

2. Strict investigation

(1) Classified return to work. Enterprises must check and register the health status of employees and confirm that employees are healthy before returning to work. Employees who are still in areas with severe epidemics will not return to work for the time being; employees with a history of traveling to other areas with severe epidemics and a history of close contact with confirmed or suspected cases will be subject to centralized isolation or home medical observation for 14 days; employees within the province Employees returning from other cities who have no history of epidemiology or related symptoms and who really need to return to work due to production can return to work in accordance with the method of "working within the factory area and not leaving the factory area, dormitory or designated area within 14 days."

(2) Establish a ledger. Implement "one person, one file" management of the health status of returning employees, and fully understand the employee's movement trajectory in the 14 days before returning to work (the location is specific to the house number, the time is specific to a certain day and time), whether the physical condition is good, and whether there is any contact with fever patients Close contact, contact with wild animals, return transportation and itinerary, etc. It is necessary to sign a letter of integrity with returning employees and conduct daily health monitoring.

(3) Set up temporary isolation points. Rely on medical offices or grassroots medical and health institutions in the jurisdiction to provide medical protection, and set up temporary isolation rooms in accordance with requirements in corporate clinics, collective dormitories and other areas. Enterprises that do not have the conditions to set up isolation sites shall determine specific isolation observation locations according to the unified arrangements of the county (district) and the park and report to the park and street (township) where they are located as required.

3. Prepare for protection

(1) Prepare for protection.

Count, purchase and reserve the required masks, disinfectants, gloves and other anti-epidemic materials, check the inventory regularly, ensure that every worker entering the site can wear a mask as required, and arrange a dedicated person to be responsible for discarding Disposal of protective equipment.

(2) Ventilation and disinfection.

1. Daily disinfection. Before resuming work and production, all areas of the company will be disinfected once, and then disinfected regularly. Special personnel should be assigned to disinfect key areas every morning and evening. Commuter cars must be disinfected immediately after use and seat cushion covers must be replaced.

2. Daily ventilation. Keep windows open for 30 minutes at least twice a day in the workplace for ventilation. To shut down the central air conditioner, if necessary, use inlet air disinfection and filtration according to relevant regulations; for centralized air conditioning systems with return air, a low-resistance medium-efficiency air filter should be installed at the return air outlet, and the air filter at the new air outlet should be strengthened. Clean and replace.

(3) Personal protection.

1. Personal protection. All employees and temperature check personnel must wear masks at all times during work, and maintain a safe distance at work stations. Corporate property and cleaning personnel must wear masks, gloves and other protective equipment as required.

2. Hand hygiene. Hand-washing facilities and disinfection supplies should be installed in corporate working and living places.

3. Accommodation arrangements. In collective dormitories, the number of people staying in the same room should be reduced as much as possible, and the arrangements should be dispersed in four directions. It is recommended to set up curtain partitions around the bed to avoid resting on top of the head. Shared bathrooms must be equipped with hand washing and disinfection equipment, and personal daily necessities should be strictly separated.

(4) Personnel control.

1. Reduce aggregation.

Encourage the use of information technology to carry out office work and reduce the frequency and time of meetings. If you really need to hold a meeting, you should choose a relatively spacious and ventilated space, and participants should wear masks.

2. Optimize recruitment methods. It is recommended to recruit employees online. It is necessary to conduct a health pre-examination of the applicants, strictly check their mobility in the past 14 days, complete registration and other tasks, and go through the entry procedures while ensuring safety.

3. Commuting arrangements. Encourage staff to drive, cycle or walk to work by themselves and minimize the use of public transportation. In principle, non-resident employees are not allowed to leave the factory, dormitories or designated areas within 14 days.

(5) Dining management.

1. The canteen is safe and hygienic. In accordance with food safety regulations, live poultry and fish products that have not been slaughtered or quarantined are not allowed to be purchased.

2. Standardize operation services. Conduct health checks and body temperature measurements for canteen service staff before work every day, and keep records. Canteen service staff must wear gloves, masks, protective shoes, etc. when working.

3. Arrange meals reasonably. Try to eat alone as much as possible, implement separate meal systems and boxed lunch systems, and adopt methods such as eating at different times, keeping a distance of more than 1.5 meters between diners, reducing conversations, and delivering meals to various units to reduce the gathering of people. Canteens and restaurants should strengthen daily disinfection and ventilation.

IV. Carry out monitoring

(1) Implement the door temperature monitoring registration system. Enterprises should conduct temperature checks twice a day and keep abreast of employees' health status through multiple channels. Establish body temperature detection points in factory areas, park gates and dormitory areas, strengthen doorman management, implement 24-hour personnel on duty, conduct strict inspections of people and vehicles entering and exiting, and complete information registration. Once those with fever/respiratory tract infection symptoms are found, they are required to He was suspended from work and sought medical treatment promptly.

(2) Implement the employee health monitoring and reporting system. Register employees' daily absences and understand the reasons for absences in a timely manner. Enterprises with commuter buses should assign dedicated personnel to measure the temperature of employees before getting on the bus. If any abnormalities are found, they should be dealt with in a timely manner according to the emergency response procedures.

5. Handling the Epidemic

Enterprises must formulate emergency response plans and handle emergencies in a timely manner.

(1) Epidemic response procedures. Those who find suspicious symptoms such as fever, cough, chest tightness, shortness of breath, etc. should report to the health department and competent authorities in the jurisdiction as soon as possible and take measures such as isolation.

(2) Management of close contacts. In accordance with the principle of territorial management, we actively cooperate with relevant departments to adopt temporary isolation management measures for close contacts and do a good job of ideological comfort.

(3) Terminal disinfection. After the outbreak, under the guidance of the local disease control agency, in accordance with the "Technical Plan for Disinfection of Specific Places (Second Edition)" in the "Novel Coronavirus Pneumonia Prevention and Control Plan (Fourth Edition)", we have done a good job in epidemic areas such as the production and living areas of cases. terminal disinfection.

(4) Suspension of production and operations. The decision will be made by the jurisdictional government based on the scope and development trend of the epidemic. Take measures to temporarily suspend production and operations when necessary.

6. Carry out publicity

(1) Extensive publicity. Collect relevant epidemic prevention knowledge, promotional films and promotional videos, and carry out publicity through publicity boards, corporate WeChat, electronic large screens, etc.

(2) Technical training. Strengthen temperature detection, disinfection and other related staff operational skills training.

(3) Health education. Popularize COVID-19 prevention knowledge, make every employee aware of COVID-19 prevention knowledge, and educate and guide employees to pay attention to personal hygiene. Wear a mask every day and keep a distance of more than 1 meter when communicating with others. In case of any physical discomfort, promptly inform management personnel, seek medical treatment promptly, and actively cooperate with relevant departments in isolation treatment and investigation.

2. Implementation plan for resumption of production

In order to strengthen production safety management at the construction site, ensure the smooth development of post-holiday production work, and eliminate various safety hazards, a resumption inspection plan is specially formulated. And according to the "Resumption of Work Inspection Plan", a comprehensive inspection of production work will be carried out before resumption of work.

1. Inspection content

1. Carry out safety production conditions inspection for resumption of work after the holiday.

2. Strengthen inspections on resumption of work at key links and key locations.

3. Actively carry out safety production education and training activities.

4. Conduct a comprehensive and in-depth inspection of the production site: Check the implementation of on-site electricity, water, gas, safety protection, equipment status, labor protection supplies, etc.

2. Work objectives

The inspection requires comprehensive, in-depth and detailed inspections. Safety production safeguard measures must be sound, strictly follow safety production technical regulations and standards, thoroughly investigate and manage safety hazards, solve existing safety management problems, and effectively prevent and resolutely curb the occurrence of accidents.

3. Work requirements

1. Raise awareness and organize carefully

It is necessary to fully understand that resumption inspection work is the basic prerequisite and powerful guarantee for safe production, and it must be combined with Based on its own production characteristics and safety production conditions, we carefully organize and formulate specific implementation plans, clarify work goals, and make the work detailed and thorough.

2. Strengthen leadership and implement responsibilities

It is necessary to enhance the understanding of safe production when resuming work, always adhere to the policy of "safety first, prevention first, comprehensive management", and resolutely overcome blindness We should be optimistic and paralyzed with lax thoughts, and effectively strengthen the safety production work in resuming work after the holidays. Managers of each department should be in place in a timely manner and carefully make preparations before resuming production: ensuring that someone is responsible for safety work, safety measures are implemented in place, and safety inspections are comprehensive and meticulous. The leader of the company's safety production team should give full play to their enthusiasm and initiative, improve rules and regulations, formulate measures, and implement safety production responsibilities at their posts.

3. The production safety team is responsible for this inspection

It is necessary to ensure that this post-holiday resumption inspection leaves no dead ends and rectifications without leaving any future troubles; intensify work efforts and investigate It is necessary to record and file hidden dangers, and take corrective measures to resolutely curb the occurrence of construction safety production accidents.

4. Strengthen safety training and education before resumption of work

①. Three-level safety education must be conscientiously implemented, and on-site production personnel should be organized to carry out centralized safety knowledge education and training before resumption of work, emphasizing that after resumption of work Safety precautions should be taken, and efforts should be made to improve the self-protection awareness of production employees. Especially new employees who join after the holidays must undergo pre-job operational safety training. Those who have not been trained and failed the third-level safety education will not be allowed to work.

②. Strictly implement the system for workers with special types of work to hold certificates. Personnel without special operation certificates or expired operation certificates are not allowed to work, effectively reducing safety hazards from the source and ensuring safe production after the holiday. unfolded smoothly.

IV. Work progress

The company’s production safety team inspects the production site. During the inspection, a "Hidden Hazard Rectification Notice" was issued to the detected safety hazards, requiring relevant departments to make rectifications within a time limit, and the rectification of each safety hazard was completed and passed the re-inspection.

In terms of electricity consumption: Management personnel and safety personnel from the Power Department will conduct inspections of the dormitories, sites and power distribution areas one by one, and promptly correct the phenomenon of private connections that do not meet the official electricity requirements. Check that the power switch and control box lock are valid.

Mechanical aspect: Check whether there are abnormalities in the safety protection of processing and auxiliary equipment, whether there are any abnormalities such as leakage.

In terms of on-site safety protection: whether there are potential safety hazards on the on-site floors, walls, etc.

Fire protection: Inspect all fire protection equipment, replace expired and ineffective fire protection equipment, and inspect fire hydrants, hoses, fire racks, and fire boxes one by one.

5. Through the efforts of all parties, the completion of the preparation work

1. Safety and civilized construction have been rectified.

2. All on-site mechanical equipment have been maintained and inspected.

3. Personnel: Provide safety production education to new employees entering the site.

3. Implementation plan for resuming production and work

1. Carefully deploy and strengthen the implementation of responsibilities.

After the Spring Festival, various production, operation and construction units have resumed production and work one after another. It is also the peak period of the return trip during the Spring Festival. The flow of people, vehicles and logistics is concentrated, and the unfavorable factors affecting production safety have increased.

The current situation of production safety is severe. In accordance with the requirements of "the party and government share the same responsibility, one post has two responsibilities, joint management, and accountability for dereliction of duty" and the "three musts", we must effectively strengthen organizational leadership and strictly implement territorial management. Responsibilities, departmental safety supervision responsibilities and enterprise main responsibilities. According to the characteristics of the industry and enterprises, enterprises must formulate practical plans for resuming production and resumption, further refine and improve preventive measures, and effectively implement all work on resumption of production and safety after the holidays. Be careful, do a good job, and do it right to ensure the safe operation and safe production of business system enterprises.

2. Highlight key points and strengthen work measures.

It is necessary to closely integrate the three-year special rectification action on safety and health currently being carried out in our county, and carry out in-depth special rectification in key industry areas, especially paying close attention to fire protection in densely populated places, oil and gas pipelines, gas, ammonia-related refrigeration, limited In key industries such as space operations, safety hazards and problems must be comprehensively, thoroughly and meticulously investigated and rectified according to the requirements of the "Five Implementations" to completely eliminate safety hazards. It is necessary to urge enterprises to organize relevant forces to conduct a comprehensive inspection and maintenance of production equipment and facilities to ensure that equipment maintenance and testing are in place and meet safe operation requirements; it is necessary to promote the preparation of enterprise emergency response measures, formulate and improve emergency response plans, especially to improve key points Emergency response measures for dangerous operating positions and key devices shall be implemented at the position and for each operator; to ensure that safety production management is in place during the resumption of production and work, enterprises must strictly implement the start-up plan and position operating procedures during the resumption of production and work, Implement various safety precautions.

3. Strictly control and strengthen acceptance standards.

Go deep into the enterprise in a timely manner to understand the status of the enterprise's resumption of production and work, and take effective measures in a timely manner when potential safety hazards are discovered. We must strictly follow the requirements of the resumption of production and work plan, conscientiously perform the acceptance procedures, adhere to the acceptance standards for resumption of production and work, and truly achieve a mature level. One is accepted, one is qualified, and one is resumed production. For those that fail to pass the acceptance inspection, rectification instructions shall be issued within a time limit, and supervision and inspection shall be strengthened. The acceptance work must adhere to the principle of "whoever checks, who signs, who is responsible" shall not arbitrarily lower standards or engage in fraud. The main person in charge of the enterprise, as the first person responsible for the enterprise's production safety, must carefully organize and carry out self-inspection and self-correction work for the resumption of production after the holidays, formulate maintenance work plans based on the actual situation, conduct safety technical briefings for relevant maintenance personnel, and conscientiously implement various safety precautions Measures must be taken to strictly implement the acceptance procedures for resumption of production and work, and blind resumption of production and work is strictly prohibited.

Fourth, effectively strengthen supervision and law enforcement during the resumption of work and production.

We must adhere to red line awareness and bottom-line thinking, and safety standards must not be lowered. It is necessary to strictly investigate, strictly control and crack down, strengthen secret inspections and surprise inspections, and resolutely and seriously deal with those who do not implement the requirements for resumption of work and production, resume work and production without passing the inspection and acceptance, and fail to deal with major hidden dangers in a timely manner in accordance with the law, and those who deserve punishment Punish strictly, stop decisively when necessary, and shut down firmly when necessary. Never be vague or soft-hearted. At the same time, supervision must be strengthened. Anyone who violates procedures, lowers standards, lax controls, or commits fraud during the acceptance work will be severely investigated and held accountable once discovered. If an accident occurs, relevant departments and personnel must be held accountable.

5. Pay close attention to safety training and education during the resumption of work and production, and strengthen safety awareness.

Before resuming production, all enterprises must be urged to conduct safety education for all employees to ensure that the training pass rate reaches 100%. In particular, they must pay close attention to the "three levels" of newly recruited employees and transferred employees. Safety education and training, and strict implementation of the assessment and induction system. For on-site operators, retraining and re-education of job operating procedures, safety production rules and regulations must be organized in a targeted manner; for special operations personnel, they must hold a certificate to work, their identity card must be consistent, and they must operate in strict accordance with the relevant requirements for special operations. Strictly manage hazardous work tickets. Files must be established on the training and assessment of employees, and make-up lessons must be made promptly for those who fail to pass the training or who have not participated in the training, so that those who have not been trained or who have failed the assessment are not allowed to take up the job.

4. Implementation plan for resumption of production and work

In accordance with the requirements of the provincial and municipal joint epidemic prevention and control working mechanisms, and in accordance with the unified deployment of the district headquarters, for the steady and orderly resumption of work in the banking industry, Improve the quality and efficiency of financial services, make every effort to ensure the resumption of work and production of enterprises, and promote stable and healthy economic development.

1. Working Mechanism

(1) Implementation of the main responsibilities of financial institutions

Each bank is responsible for the main responsibility for epidemic prevention supervision after the business premises resume work, and the bank is mainly responsible People are the first person responsible for epidemic prevention and control in the institution. Each bank must set up an epidemic prevention and control working group led by the main person in charge, formulate a complete epidemic prevention and control plan for resumption of work, and submit it to the Finance Bureau of the High-tech Zone for approval.

(2) Establish and improve the coordination and linkage mechanism for epidemic prevention and control

All banks must obey local management, consciously integrate into the epidemic prevention and control grid, and establish smooth communication channels and collaborative work Mechanism to ensure that once problems occur, effective measures can be taken promptly and properly dealt with as soon as possible.

2. Standards that need to be met for resumption of work

First, improve the prevention and control mechanism. Sign a resumption of work epidemic prevention and control document, formulate a work plan for resumption of work epidemic prevention and control, and an emergency response plan, clarify the organizational structure, strengthen prevention and control measures, and implement the main responsibilities. Emergency situations shall be strictly implemented in accordance with relevant regulations.

The second is the conditions for personnel returning to work.

1. The returning personnel have no history of close contact or close contact within 14 days, have no published history of staying in medium- and high-risk areas, and have recently tested negative for 6 consecutive nucleic acid tests.

2. Those who return to work must be in order to prevent residents in the area. In principle, enterprises implement closed management and gradually open up according to the situation. Under special circumstances, the company will adopt a "two-point and one-line" and "point-to-point" approach to pick up and drop off returning workers. Residents in closed areas, controlled areas, and key areas are not allowed to return to work.

Third, protective materials are complete. Preventive and control materials such as masks, gloves, and thermometers, as well as disinfection supplies such as hand sanitizer, disinfectant, and alcohol must be prepared in advance to ensure sufficient reserves. An emergency isolation room must be set up, and an inventory of materials and a usage account must be established.

Fourth, sterilization and sterilization must be in place. Do a good job in sanitation, disinfection and disinfection of business premises and office areas, especially bathrooms, trash cans and public equipment with high contact surfaces; use fresh air to run the air conditioner and turn off the humidification function of the air conditioner, and disinfect the air inlet and outlet of the air conditioner Disinfect, maintain ventilation, and establish a sound disinfection ledger.

Fifth, for banks that have applied for resumption of work, except for essential positions, employees in other positions will temporarily stay at home.

3. Control measures after resumption of work

First, strictly implement temperature measurement and code verification. Set up a dedicated person at the entrance of the business premises to measure the temperature and code of all people entering and exiting, check the number of nucleic acid tests, and check the wearing of masks.

The second is to control the density of personnel in business outlets. Take measures to limit the flow of customers to reduce the time customers spend in branches, maintain a one-meter distance between customers, and limit the number of customers handling business in a business branch to more than 5 people at the same time to prevent clustering risks and ensure proper registration.

The third is to strengthen the management of personnel returning to work. After returning to work, they must follow the requirements of the Epidemic Prevention and Control Headquarters to supervise returning workers and customers to take personal protection, maintain a certain distance during service exchanges, and avoid direct contact. Those returning to work will undergo nucleic acid testing once a week, and their temperatures will be measured in the morning, noon and evening every day, and a complete health information ledger will be established and improved for those returning to work.

The fourth is to carry out extensive publicity and education. Post public place QR codes and epidemic prevention and control clear papers in conspicuous places such as business premises, and use walls and displays to publicize epidemic prevention requirements and precautions. Arrange dedicated personnel to conduct training on disinfection operating procedures and epidemic prevention and control measures to improve epidemic prevention, control and emergency response capabilities.

The fifth is to carry out daily disinfection and disinfection. Maintain ventilation and cleanliness on a daily basis. Disinfect and disinfect business premises and office areas, air-conditioning inlets and outlets, and public equipment with high contact volume regularly every day and keep records.

Sixth, strict implementation of closed-loop management. Employees who have returned to work should try their best to conduct closed management in the industry. If they really need to return to their place of residence or go out to handle business, a "two-point and one-line" closed-loop pick-up and drop-off will be implemented to reduce the flow of people; unnecessary meetings, gatherings, etc. are suspended, and employees can eat in batches. Meet off-peak dining requirements.

IV. Procedures for resumption of work

1. The banking industry shall implement a reporting and filing system with the Finance Bureau for resumption of work. The bank submitted the "Financial Institutions Epidemic Prevention and Control Work Plan", "Financial Institutions Epidemic Prevention and Control Document", the list of people returning to work and the nucleic acid testing status to the district Finance and Finance Bureau.

2. Arrangement of return to work time. Banks will resume work and production at 6 a.m. on March 28, gradually restoring normal production order.

Areas such as sealed areas, control areas, and key areas will be released from control after reaching the prescribed standards according to the unified arrangements of the headquarters.

5. Implementation plan for resumption of production and work

At present, xx City’s epidemic prevention and control has achieved phased results, and is orderly advancing downgrading and unblocking, and orderly restoring production and living order. On the premise of epidemic prevention and control, this plan is formulated to promote the orderly resumption of work and production of industrial enterprises (non-imported cold chain enterprises).

1. Clarify the responsibilities of various entities

(1) Each enterprise is primarily responsible for its resumption of work and production and epidemic prevention and control, and must ensure that the resumption of work and production does not lead to the spread of the epidemic. The legal representative of an enterprise is the first person responsible for epidemic prevention and control of the enterprise.

(2) Each region is responsible for the supervision of the resumption of work and production and epidemic prevention and control of enterprises in the region. The township and street governments where the enterprises are located are responsible for local management of enterprises within their jurisdictions and must ensure that all enterprises within their jurisdictions resume operations. The resumption of production is included in the scope of supervision.

(3) All regions should immediately organize relevant industry authorities to set up special teams for the resumption of work and production of enterprises, responsible for the implementation of specific work on the resumption of work and production and the organization and guidance of epidemic prevention and control work.

(4) Headquarters at all levels have the right to inspect the resumption of work and production and epidemic prevention and control work of enterprises, and enterprises must cooperate with the inspection work.

(5) Headquarters at all levels have the right to require enterprises that do not have the ability to prevent and control the epidemic or that do not have adequate epidemic prevention and control work to postpone the resumption of work or order them to suspend work.

2. Necessary conditions for the resumption of work of the enterprise

(1) The enterprise has formulated a work plan for the resumption of work and production and epidemic prevention and control and submitted it to the township and street governments and various regions under its jurisdiction for the resumption of work and production The competent authorities shall register and submit the "Epidemic Prevention and Control Letter" (templates shall be formulated by the competent authorities for resumption of work and production in each region).

(2) Confirmed knowledge of and execution of orders from headquarters at all levels.

(3) The prevention and control management system and specific responsible persons have been determined.

(4) A certain amount of protective materials has been reserved to meet production and operation needs for a period of time.

(5) Guidance contact has been established with local medical and health forces.

(6) An isolation place has been set up and all preparations for transfer arrangements have been made.

3. Make various preparations before the enterprise resumes work

(1) Organize each employee to truthfully fill in the employee resumption registration form, and understand the relationship between the individual employee, family, relatives and friends and the epidemic situation If any abnormal situation is found, necessary measures must be taken immediately and reported to the local headquarters.

(2) Before resuming work, all types of workplaces, employee dormitories, canteens, garbage collection points and other places must be disinfected, and preventive and control measures such as setting up temperature measurement points must be implemented.

(3) It is necessary to educate employees on epidemic prevention knowledge and convey the company’s plans and work systems for resumption of work and production and epidemic prevention and control.

(4) Training and emergency drills must be strengthened to ensure that employees are familiar with work requirements such as division of responsibilities, environmental sanitation, personal protection, handling of abnormal situations, and personnel evacuation, so that they can handle emergencies in an orderly manner.

(5) Special teams for the resumption of work and production in each region shall supervise and inspect the various measures for epidemic prevention and control of enterprises. For enterprises that apply for resumption of work and production, the industry and information technology departments of each region shall jointly review and review with relevant departments. Confirm and approve.

(6) Before the enterprise resumes work, the enterprise must verify the nucleic acid test records of employees to ensure that employees have participated in the local nucleic acid test for all employees. At the same time, employees will be organized to undergo another nucleic acid test within 24 hours before resuming work.

(7) The enterprise shall verify the COVID-19 vaccination status of all employees, and all employees who meet the vaccination conditions shall be vaccinated.

IV. Enterprises should strengthen their own management after resuming work

(1) Adopt a closed management model, minimize or avoid direct contact with outsiders, and resolutely prevent the importation of the epidemic. For outsiders who really need to enter the enterprise, they must register the time of entry and exit, name, contact information and other information, and implement temperature measurement and "card code" inspection measures. Only if they meet the requirements can they enter.

(2) Establish an employee health monitoring system. Employees' body temperature should be checked every day before entering the office or factory for work. If any abnormalities are found, they should be handled and reported immediately according to regulations.

(3) It is necessary to adjust and optimize working methods, narrow the scope of personnel activities, minimize the gathering of people caused by various meetings, receptions, etc., and cancel unnecessary gathering activities such as cultural and entertainment activities.

(4) It is necessary to strengthen the cleaning and disinfection of key places such as restrooms, dormitories, canteens, toilets, bathroom elevators, etc., and assign dedicated personnel to be responsible for regular disinfection. Elevator buttons, door handles and other frequently touched parts should be disinfected more frequently.

(5) It is necessary to strengthen canteen management. In addition to ensuring epidemic prevention and control in procurement, production and other links, try to adopt methods such as divided meals and staggered meals.

(6) Dormitory management must be strengthened. Dormitories that do not meet sanitary conditions and do not have daily prevention and control measures shall not be used.

(7) Ventilation should be strengthened in the workplace to maintain indoor air circulation. Where conditions permit, natural ventilation should be adopted. When natural ventilation is not possible or the ventilation conditions are poor, physical ventilation should be carried out through mechanical equipment such as exhaust fans, ventilation fans, air conditioners, etc. and the air should be exhausted directly to the outdoors. When using a central air conditioner for ventilation, the air conditioner should be cleaned regularly and the air conditioner return air filter should be disinfected.

(8) After enterprises resume work and production, they must regularly organize employees to undergo nucleic acid testing in accordance with relevant regulations.

V. Other related requirements

(1) Competent departments of various industries and disease control departments must strengthen training and guidance on epidemic prevention and control before enterprises resume work and during production and operation. Educate and guide employees to pay attention to personal hygiene and keep a distance of more than 1 meter when communicating with others; wash hands with running water and hand sanitizer immediately after contact with respiratory secretions.

(2) All regions provide enterprises with comprehensive information on purchasing channels for protective materials, and assist enterprises in purchasing protective materials and reserve them.

(3) Enterprises should guide employees through publicity and education to enhance their ability to identify the authenticity of information, and do not forward, spread or hype false information, so as to create a good public opinion environment for epidemic prevention and control.

(4) All relevant departments and regions must pay close attention to the production and operation of enterprises and take various practical measures to solve various problems such as the security of production materials encountered by enterprises in production and operation.

(5) Enterprises must strictly manage production safety during the process of resuming work and production.