What if Kaidishi tk2 fingerprint lock management password is forgotten?

The management password of Kaidishi tk2 fingerprint lock is very important for fingerprint lock. If you forget the management password, all the functions of the fingerprint lock cannot be used. At this point, unless you restore the fingerprint lock to the factory settings, reset the management password to "12345678". The following small series will tell you how to restore the factory settings of this lock. Come and have a look!

Steps to restore factory settings

Step one:

Make sure that the fingerprint lock is powered on, and then walk to the inner panel of the fingerprint lock.

Step two:

Insert the fingernail and dig the gap under the hand, remove the box cover, and then take out the network module.

Step 3:

Find the location of the initialization button, press and hold the initialization button for more than 5 seconds, and let go when the fingerprint lock prompts "Factory settings have been restored, please modify the management password in time". At this point, the fingerprint lock has been successfully restored to the factory settings.

Bian Xiao tip:

Restoring the factory settings will disconnect the fingerprint lock from the gateway and require manual binding again. Moreover, the previous fingerprints, passwords and card information have been emptied and need to be added again.

Heart of the King 2 Click on the demo.