How to charge for the double-track Yuba installed in Changsha bathroom?

How do you charge for re-threading Yuba in Changsha bathroom? Many customers often encounter the trouble of threading and wiring when installing Yuba in new houses. In fact, Yuba is generally divided into lamp warm Yuba and wind warm Yuba. Different Yuba decorative materials have different thread leaving standards. Whether you want to renovate the Yuba partially or disassemble it as a whole, you can learn the knowledge of re-threading Yuba in Changsha bathroom with Bian Xiao.

First of all, we should know the difference between Changsha Fengre Yuba and Changsha Dengre Yuba. According to the professional Changsha introduction, air-cooled Yuba usually reserves five sets of wires, one for lighting, one for internal circulation fan, one for PTC heater, one for negative ions and one for ventilation. However, the lamp-heated Yuba will generally reserve four sets of wires, one for lighting, two for lamp heating and one for ventilation. Therefore, when installing Yuba in Changsha bathroom, you need to know what Yuba you are using, so as to understand the specific installation details.

Changsha has a wide range, including Furong District, Tianxin District, Yuelu District, Kaifu District, Yuhua District, Wangcheng District and Changsha County. The charging standards in different regions are different, and the consumption level in urban areas is higher than that in suburbs. So how do you charge for installing Yuba in Changsha bathroom?

Yuba sold in Changsha market is mainly divided into four categories, namely traditional light bulb Yuba, PTC warm air Yuba, ordinary carbon fiber Yuba and far infrared Yuba. Among them, the price of traditional bulb Yuba is lower, generally below 220 yuan/Taiwan, and the price of PTC warm-air Yuba is slightly higher, generally around 250-450 yuan. Ordinary carbon fiber Yuba and far infrared Yuba are both high-tech products, and the price will be higher than the first two. (Price source network, for reference only)

If you think the charge is too high, you can try threading yourself. Re-threading the bathroom yuba in Changsha bathroom requires unscrewing all the light bulbs, then loosening the spring from the ring of the mask, taking off the mask and wiring. One end of the interactive connecting wire is connected with the switch panel, and the other end is pulled out from the ceiling with the power cord. Open the terminal cover on the box, connect the wires according to the wiring diagram and terminal marks, cover the terminal cover, and fix the terminal cover with screws. Have you learned everything?