How to repair the spring of refrigerator door

The freezer door spring is a very important part, which can keep the freezer door closed and avoid the loss of cold air, thus maintaining the refrigeration effect and saving energy. However, after long-term use, the spring of the freezer door may be loose and damaged, which will affect the use effect of the freezer.

Here are several ways to repair the spring of freezer door for your reference:

1. Adjust the tension of the door spring.

If the door spring is too loose, it can be solved by adjusting the tension of the door spring. First of all, we need to find the position of the door spring, which is usually placed on both sides of the freezer, near the door. Then, pull the spring with a wrench or pliers to adjust the tension of the spring. If the door spring is seriously damaged and cannot be recovered, it is recommended to replace it with a new one.

Repair spring

If the spring is partially broken or small parts fall off, you can try to repair it. First of all, take apart the spring, observe the damaged parts and analyze how to repair them. Generally speaking, it can be bound or pasted with conductive copper wire and nylon rope, so we must pay attention to the symmetry and stability of the spring. If the spring road is seriously injured, it should be replaced in time.

3. Replace the spring

If the above two situations can't solve the problem, you need to replace the door spring with a new one. It should be noted that the door springs used by different brands of freezers are different and need to be selected according to specific models. When replacing a new door spring, it is necessary to disassemble the original door spring first, then disassemble the door body and install a new door spring to check whether the performance and tension of the spring are normal and ensure that it is installed in place.

In short, when there is a problem with the spring of the freezer door, the above repair method can be adopted, which can generally solve most problems. In case of irreversible situation, it is recommended to contact a professional maintenance master for maintenance to ensure the use effect and service life of the freezer. At the same time, we should also pay attention to the daily maintenance of the freezer to avoid problems with the door spring.