What is the reason why the automatic numerical control steel bar straightening and cutting machine can't cut continuously?

The gap between the upper and lower knives is too large, which should be adjusted to about 0.2 mm?

The delay disconnection time and relay time are too short to be adjusted, and should be set at 0.2~0.4 seconds.

If the strength of the steel bar to be cut is too high, it can be cut again on the machine with the previously cut steel bar to distinguish that the strength of the steel bar to be cut is greater than 750N N N.

1. Straightening and cutting machine is a machine for straightening and cutting steel bars with a diameter below 14 mm, and the cutting length can be customized according to customer requirements.

2. Straightening and cutting machine is widely used in stainless steel wire, cold drawing, galvanized wire, iron wire, steel wire, aluminum wire, water drawing, steel bar, etc.

3. The invention has the characteristics of high speed, small error, no thread running, reasonable structure, convenient operation, safety and reliability, and can be widely used in various fields of hardware products, handicrafts and daily necessities production. Such as: pet cages, chicken cages, air-conditioning net covers, bicycle baskets, bars, umbrella stands, bird cages, refrigerator racks, steel wire mesh baskets, building wires, steel wire mesh screens and other metal wires are straightened and cut off.

4. A steel processing machine is used for straightening, cutting and rust removal of steel bars with a diameter of 14 mm or less. It consists of a straightening oil cylinder, a traction mechanism, a cutting mechanism, a steel bar fixed-length frame, a frame and a driving device.