Operation process of Baofeng jewelry vacuum forming machine

Firstly, determine the pipeline, water pipe, trachea and pumping water.

radio tube

, vacuum line connector, corresponding connection.

Then turn on the main power supply-adjust the air pressure to 2 kg-OK.

Plug rod

Press it to the bottom-put the material in the pour.

Mold cup

Internal temperature control to the required temperature-time control to the required time-start pressing-power adjustment to 70%-

shielding gas

Open-the cylinder head is closed-after the material is dissolved-the casting cylinder is pulled to the innermost position-casting lifting is opened-vacuumizing is opened (vacuumizing

Vacuum time

Wait for 30 seconds)-Pressurized opening-Casting opening (wait 1 min)-Vacuum closing-Exhaust opening-Casting lifting closing-Stop pressurizing-Casting cylinder is pulled out and pulled to the bottom, and the operation is completed.