What about the unit that issues the certificate of continuing education?

How to test the certificate of continuing education for the second-level constructor?

You only need to go to the in

What about the unit that issues the certificate of continuing education?

How to test the certificate of continuing education for the second-level constructor?

You only need to go to the institution that participates in the re-education to issue a certificate, including the courses of re-education, the results of the courses, and the restrictions on class hours. Obtain the certificate of continuing education of registered architects after passing the examination. As long as it is an institution designated by the certification unit of the second-level constructor.

Continuing education is divided into compulsory courses and elective courses, and each course is 60 hours in each registration period. After continuing education reaches the qualified standard, a certificate of continuing education will be issued.

The specific requirements of continuing education shall be formulated separately by the competent construction department of the State Council in conjunction with the relevant departments of the State Council.

"Regulations on the Management of Second-level Builders" stipulates that the registration certificate and practicing seal shall be valid for 3 years, and an application for renewal of registration shall be made at the expiration of 3 years. Continuing education can be held once every 3 years and passed the examination. The general construction administrative department shall hold it once a year. You can pay attention to the notice of the local construction administrative department (Ministry of Housing and Urban-Rural Development) in official website.

If it is necessary to continue practicing after the expiration of registration, it shall apply for renewal of registration in accordance with the provisions of Articles 7 and 8 30 days before the expiration of registration. If the registration is renewed, the validity period is 3 years.

To apply for renewal of registration, the following materials shall be submitted:

(a) the application form for renewal of registration of registered architects;

(2) the original registration certificate;

(three) a copy of the employment contract signed by the applicant and the employing unit or other valid documents;

(four) the applicant meets the requirements of continuing education within the validity period of registration.

Two. Where to attend the training for the continuing education of the first-class constructor? Which unit issued the certificate of continuing education for builders?

Some time ago, the Ministry of Construction just announced a number of training institutions with first-class construction engineer training qualifications throughout the country. LZ can check and answer.

Continuing education is to meet the requirements of continuing education hours within a registration period (that is, within three years). .

For example, if the registration is successful on September 20th, 201/year, the continuing education certificate must be obtained before June 20th, 20 19, otherwise the registration renewal formalities cannot be handled on September 20th, 2065438 19.

Where can I check the serial number of the continuing education certificate?

A copy of the number of the continuing education certificate can be found in the personal certificate attack. The number of the continuing education certificate is the number on the continuing education certificate issued by the unit at the time of employment. This continuing education certificate is in the hands of individuals. Generally, this certificate should be brought with each training, and the training unit will fill in the content and class hours and affix the official seal.

If the certificate is lost, you can go to the training unit or log on to Xuexin.com//chsi.cn and Xueyi.com (teacher qualification examination certificate).

//study ez/ Shi Jiao /zslq/ and other related websites.

Ⅳ What is the use of continuing education certificate?

The role of continuing education certificate:

1, looking for a job

At present, the primary condition for many domestic employers to recruit is academic qualifications, and the threshold for academic qualifications is at least a bachelor's degree. Having a bachelor's degree in online education is also a stepping stone to job hunting, and it is easier to get more opportunities.

2, postgraduate entrance examination, civil servants, qualification examination.

Online education can also take the postgraduate entrance examination, and the conditions for postgraduate entrance examination include the requirements of relevant academic qualifications. Therefore, after obtaining online education, interested candidates can continue to take the postgraduate entrance examination. The degree of online education belongs to the degree of higher education recognized by the state, which meets the conditions for applying for the national civil service, so the degree of online education can also be used for the examination of civil servants and qualification certificates.

3. Promotion and salary increase

In the workplace, people with higher education often get more opportunities for promotion. At the same time, some employers will also evaluate their professional titles and salary levels according to their employees' academic qualifications.

(4) Units that issue extended reading certificates for continuing education:

Continuing education refers to all kinds of education received by people who leave formal education, take part in work and have adult responsibilities. It is an advanced supplementary education for professional and technical personnel to update, supplement, expand and improve their abilities.

Four meanings

First, continuing education is a kind of adult academic education and non-academic education;

Second, the educated have reached a certain level in academic qualifications and professional skills;

Third, the content of continuing education is new knowledge, new technology, new theory, new method, new information and new skills;

Fourth, the purpose of learning is to update and supplement knowledge, broaden horizons, improve knowledge structure and improve innovation ability to meet the needs of scientific and technological development, social progress and our own work.

superiority

1 low tuition: the self-study exam for higher education is much cheaper than the tuition for one academic year in ordinary colleges and universities;

2. Academic qualifications recognized by the state: the state recognizes academic qualifications of self-taught, adult, network and open education, and graduates from self-taught examinations enjoy the same treatment as similar graduates from ordinary universities;

3 National Recognition: China's self-taught diploma has been recognized by 43 overseas countries, and RTVU's diploma has also been recognized by Britain, the United States, Japan, Australia and other countries. This recognition includes mutual recognition of academic qualifications and mutual recognition of credits;

4. Admission is wide and strict: there is no entrance examination for self-study, and high school graduates or those with equivalent academic qualifications can enter the school directly, and the number of places is not limited by the national plan; To pass the exam, you need to take the national unified adult exam before you can enter school; Open education needs to take the entrance examination of local TV universities, which meets the requirements of relevant academic qualifications;

5 Free choice of major: Candidates can freely choose their favorite major according to their hobbies, specialties and potential abilities.

Ⅳ How to print the certificate of network continuing education for the second-level constructor?

You should attend at least 120 hours of continuing education in each registration period and apply directly online.

According to Article 19 of the Interim Measures for the Administration of Continuing Education of Registered Architects, the duration of continuing education for first-class registered professional architects in each registration cycle is not less than 120 hours, including 60 hours for compulsory courses and 60 hours for elective courses. Registered two or more majors, each additional major should also participate in 60 hours of continuing education in the added major, including 30 hours of compulsory courses and 30 hours of elective courses.

Training units should promptly report the list of registered construction engineers' continuing education and training students, training contents, class hours and examination results in written and electronic information management systems, and report them to professional leading departments or provincial housing and urban construction departments. The professional lead department or the provincial housing and urban-rural construction department confirmed and sent to the housing and urban-rural construction department of the State Council for the record.

(5) Units that issue extended reading certificates for continuing education:

The relevant requirements for the continuing education of registered architects are as follows:

1. The organization of registered architects participating in continuing education adopts the principle of combining grading with specialization.

2, the State Council urban housing and urban construction, railways, transportation, water conservancy, industrial informatization, civil aviation and other departments or their entrusted industry associations, organize registered construction engineers of this major to participate in continuing education, and provincial housing and urban construction departments organize secondary construction engineers to participate in continuing education.

3. The leading departments of various professions recommend the continuing education and training units of first-class registered architects as required and report them to the competent department of housing and urban-rural construction in the State Council for examination, and the competent department of housing and urban-rural construction at the provincial level shall review the continuing education and training units of two architects and report them to the competent department of housing and urban-rural construction in the State Council for the record.

ⅵ How to get the certificate of continuing education for professional and technical personnel?

According to the Measures for the Administration of Continuing Education Certificates for Professional and Technical Personnel, when evaluating professional titles, continuing education certificates shall be handled in the following ways:

Article 3 According to the requirements of the Regulations, the participation of professional and technical personnel in continuing education should be listed as an important condition for annual assessment, post appointment, renewal, promotion of professional and technical post qualifications and re-registration of professional and technical qualifications. Issued the certificate of continuing education for professional and technical personnel in Guangdong province, and professional and technical personnel must complete the task of continuing education for no less than 12 days or 72 hours every year.

Among them, public subjects are generally arranged for 3 days or 18 class hours, professional subjects for 7 days or 42 class hours, and elective subjects for 2 days or 12 class hours. No less than 6 class hours per day, 45 minutes per class hour. The study days and hours of each subject can be combined as the study time of the subject. Less than 6 hours a day, calculated by the hour.

(6) Units that issue extended reading certificates for continuing education:

According to the "Tianjin professional and technical personnel and management personnel continuing education certificate registration management measures":

Tenth professional and technical personnel and management personnel flow between enterprises and institutions in this Municipality, and their "Continuing Education Certificate" can continue to be used.

Eleventh professional and technical personnel and management personnel should hold a copy of the "continuing education certificate" for their own use only, and shall not be altered without authorization.

Twelfth professional and technical personnel and management personnel should properly keep the "continuing education certificate". After completing the certificate of continuing education, you can apply for a new certificate, and the original certificate is still kept by me. If it is damaged or lost, it should explain the situation to the unit and the issuing department in time and apply for a replacement.

Thirteenth any unit shall not replace the "certificate of continuing education" with "certificate of completion" and "certificate of conformity" for any reason.

Fourteenth enterprises and institutions should strictly fulfill the registration procedures to ensure the authenticity of the registration content and the seriousness of the registration work. If fraud is found, the parties concerned should be held accountable.

Article 16 The registration, examination, confirmation and issuance of certificates shall be carried out in an orderly manner. No unit or individual may forge, alter, lease, lend or transfer the certificate. Anyone who violates the certificate management shall be investigated for legal responsibility in accordance with the relevant provisions of the Regulations.

Article 17 These Measures shall be interpreted by guangdong provincial department of human resources and social security, and shall come into force as of 20 10 12 1.

ⅶ How to reissue the certificate of continuing education?

According to Article 4 of the Measures for the Administration of Continuing Education Certificates for Professional and Technical Personnel in Guangdong Province, the continuing education of professional and technical personnel must be truly and accurately recorded in the continuing education management system of Guangdong Province. Professional and technical personnel, teaching institutions and employers can register through the management system. The method of re-registration is as follows:

1. Those who attend training, further education or further education in a teaching institution shall be registered by the teaching institution or individual.

2, to teaching, scientific research, production units to carry out related continuing education practice activities and participate in academic conferences, academic lectures, academic visits, by the employer or individual registration.

3, to participate in distance education by the employer or individual registration.

4. Participate in the online learning system recognized by the Provincial Department of Human Resources and Social Security, and be automatically registered by the management system.

According to the requirements of the Regulations, the participation of professional and technical personnel in continuing education should be listed as an important condition for annual assessment, post appointment, renewal, promotion of professional and technical post qualifications and re-registration of professional and technical qualifications. Issued the certificate of continuing education for professional and technical personnel in Guangdong province, and professional and technical personnel must complete the task of continuing education for no less than 12 days or 72 hours every year.

(7) Units that issue extended reading certificates for continuing education:

Calculation method of continuing education hours:

Professional and technical personnel to participate in continuing education time should be not less than 90 hours a year, of which professional subjects are generally not less than two-thirds of the total hours. Professional and technical personnel to participate in continuing education in the following ways, included in my continuing education hours:

1. Attend training courses, seminars or advanced courses;

2. Participate in relevant continuing education practice activities;

3. Participate in distance education;

4. Participate in academic conferences, lectures, academic visits and other activities;

5, in accordance with the provisions of other ways. The specific measures for determining the mode and hours of continuing education shall be formulated by the administrative departments of human resources and social security of provinces, autonomous regions and municipalities directly under the Central Government.

ⅷ How to print the certificate of continuing education

1. Log in to official website //hbace.cn on the computer and log in to the page.

(8) Units that issue certificates of extended reading for continuing education.

Every professional and technical personnel who have completed complete continuing education should have 24 public class hours +56 professional class hours and ***80 class hours every year.

Some students will find that the course scores registered before 20 17 are also displayed on the learning platform. Don't worry if you don't get enough grades in the course, you can take part in the professional title evaluation with the record of registered grades on the certificate!

ⅸ What should I do if the continuing education certificate of professional and technical personnel is lost?

The certificate of continuing education for professional and technical personnel is lost and needs to be reissued.

If your work unit belongs to a county, go to the professional and technical unit of the county human resources and social security bureau.

The lost certificate of continuing education is explained as follows: (Take Xuzhou as an example)

1. Candidates must download the Application Form for Renewal of Certificate online, fill in relevant information and affix their official seals, and bring their original ID card to the Continuing Education Office on the fourth floor of Xuzhou Vocational and Technical Training Center (West Building, No.72 Zhu Min South Road, Yunlong District, Xuzhou City) to apply for renewal of continuing education.

2. The reissued certificate can be collected at the center within 3 working days from the date of application.

3. Candidates are requested to keep the certificate properly. The reissued information will be included in the reissued certificate information base and cannot be reissued repeatedly.

4. The form shall be signed by the examinee and sealed by the unit, and submitted to the continuing education office for registration and reissue the certificate.

ⅹ The second-level constructor will continue to educate and learn to operate in order to obtain the certificate.

You only need to go to the institutions that participate in re-education, including re-education courses, course scores and class time limits. Obtain the certificate of continuing education of registered architects after passing the examination. As long as it is an institution designated by the certification unit of the second-level constructor.

Continuing education is divided into compulsory courses and elective courses, and each course is 60 hours in each registration period. After continuing education reaches the qualified standard, a certificate of continuing education will be issued.

The specific requirements of continuing education shall be formulated separately by the competent construction department of the State Council in conjunction with the relevant departments of the State Council.