What do manufacturing engineers mainly do?

Question 1: What does a process or manufacturing engineer do? Simply put, technology refers to manufacturing technology. How to process, the sequence of processing, efficiency and quality are all problems that process engineers should consider. It is the technical processing unit in the process of product realization.

Question 2: What does the manufacturing engineer 1 do? Arrange production plan to avoid unnecessary costs; 2. Provide correct product documents, training, production procedures and other relevant information to front-line supervisors and workshop employees; 3. Provide suggestions to design engineers on product design and assist in improvement to reduce costs and improve quality and productivity; 4. Communicate the changes related to the production process with the corresponding employees in time, handle the irregular operation behaviors of employees in time and correct them; 5. Consider simplifying material handling behavior and improving ergonomics, and improve production safety by analyzing existing and suggested production processes; 6, investigate and put forward suggestions for equipment improvement, in order to improve efficiency.

Question 3: Some questions about manufacturing engineers and process engineers. What responsibilities should PE engineers have?

ME is mainly responsible for exception handling, temporary countermeasures and subsequent improvement of production institutions. Whether bad mechanical parts and new product samples are specially used.

PE is mainly responsible for exception handling, temporary countermeasures and subsequent improvement of production electronics. Is it special to use defective electronic parts and new samples?

This is the difference between me and PE. Of course, some companies define PE as my nature. The equipment maintenance mentioned before is done by electricians. How can you compare with me and PE? Engineer 1, technician 1.

Sports engineers have some main responsibilities.

For example, the introduction of new products, the arrangement of trial production, production guidance, timely elimination of abnormal problems on site (temporary countermeasures will be taken immediately in case of abnormality), improvement of production technology, improvement of product performance and structure, including the preparation of process instructions, etc. In short, PE engineers have absolute authority over production.

Equivalent to the engineer of engineering technology-the key point of PE is that the field production of PE must have a good understanding of production technology, product performance and structure. It can be said that the most familiar person in a factory is PE, and everything in production is under the control of PE, but now engineers are sent to do the combination of PE and IE. . .

1. What is a pe engineer and what is a pe engineer?

There are two kinds of PE engineers, process engineers and product engineers. The former is responsible for the design and implementation of product manufacturing technology; The latter is responsible for product design and development. As for the project engineer, he is mainly responsible for the project development progress and finance, with emphasis on project coordination and project management. Generally don't call him PE, call him project manager. Pe Engineer Responsibilities In foreign-funded enterprises, there are often PE engineers. What kind of work does it belong to? Which industry does it belong to? What is its duty?

A: There are two kinds of pe engineers, process engineers and product engineers. The former is responsible for the design and implementation of product manufacturing technology; The latter is responsible for product design and development. As for the project engineer, he is mainly responsible for the project development progress and finance, with emphasis on project coordination and project management. Generally don't call him pe, call him project manager. Pe engineers have some main responsibilities, such as the introduction of new products, the arrangement of trial production, production guidance, the timely elimination of abnormal problems on site (temporary countermeasures are available immediately when abnormalities occur), the improvement of production process, the improvement of product performance and structure, including the preparation of process instructions, etc. In short, pe engineers have absolute authority over production. Equivalent to the engineer of engineering technology-the key point of PE is that the field production of PE must have a good understanding of production technology, product performance and structure. It can be said that the most familiar person in a factory is pe, and everything in production is under the control of pe, but now engineers are sent to do the combination of pe and ie. . .

Possible product development, trial production and verification

Question 4: What does a production process engineer do? Mainly responsible for the production process of products, solve production problems, improve production efficiency, and improve quality and efficiency by improving technology and production methods.

Question 5: What are the manufacturing engineers responsible for? Production engineer (PE manufacturing engineer).

The main responsibilities of sports engineers

For example, the introduction of new products, the arrangement of trial production, production guidance, timely elimination of abnormal problems on site (temporary countermeasures will be taken immediately in case of abnormality), improvement of production technology, improvement of product performance and structure, including the preparation of process instructions, etc.

In short, PE engineers have absolute authority over production.

Equivalent to the engineer of engineering technology-PE focuses on field production.

PE must have a good understanding of production technology, product performance and structure.

It can be said that the person most familiar with production in a factory is PE, and everything in production is under the control of PE.

Question 6: What kind of technical engineer is a technical engineer in machinery factory? Responsible for product technical evaluation, providing commercial pricing basis, compiling processing technology and formulating product acceptance standards; Manufacturing engineer: Instruct production operation, design fixture, provide process parameters, select cutting tools, and formulate operation rules and safety operation rules for special processes.

Question 7: What are the main responsibilities of a product engineer? To learn those things? I'm a product engineer (PE) now, but I'm just getting started. I feel that my responsibilities mainly include the following aspects: 1. I must know enough about the products of the platform I am responsible for, including assembly, subassembly, single piece, assembly, materials and processing technology. 2. Cooperate with the project acquisition department to acquire the project, and be responsible for almost all links such as later research and development, modification, testing and ex-factory production. 3. Familiar with relevant standards, including international standards, domestic standards and customer standards. 4. Have certain knowledge of project management, and understand the processes such as PPAP, FMEA, ECR and ECO. In short, the ultimate responsibility of the product engineer is to coordinate the internal and external departments of the company, including customer engineering department, internal design department, purchasing department, testing department and so on. And deliver the product to the customer on time at the planned time node.

Question 8: What does a production engineer mean? Refers to the person responsible for the processing technology of products or parts.

operating duty

1, with scientific processing methods and processing technology for workpiece processing;

2, producing high-precision parts;

3. Formulate the process documents for construction machinery processing; 4, process technology preparation and process verification, etc. , responsible for solving technical problems in the production site. Working background,

Question 9: What do engineers do before manufacturing? 15 there are many kinds of pre-manufacturing engineers, mainly depending on your major and the content set in the company recruitment, but one thing is certain: there will be requirements in the management system, and you need to have experience in projects and factories.

Daily work: 1, project capacity and factory capacity estimation, etc.

2, the new project equipment, manpower planning, etc.

3, process flow and other procedures.

4. Participate in the development of new products.

5. Participate in new product audit.

6. Quality system maintenance (TS 16949, ISO 1400 1, etc. )

Generally speaking, it is to do some pre-project and planning work, and participate in development and audit, as well as usual maintenance.

Question 10: what is the difference between ME (manufacturing engineer) and IE (industrial engineer) in manufacturing enterprises? If possible, be specific. Please. ME and IE are two important positions in manufacturing industry, and they also have different division of labor.

The main responsibilities of ME engineers include: introduction of new products, arrangement of trial production, production guidance, timely elimination of abnormal problems on site (temporary countermeasures will be taken immediately in case of abnormality), improvement of production process, improvement of product performance and structure, including preparation of process instructions, etc. In a word, ME engineers focus on the management of on-site production and have a good understanding of production technology, product performance and structure. Absolute authority over production. It can also be said that the person who is most familiar with production in a factory is me, so everything produced in this way is under my control. Of course, some companies call me PE (product engineer), that is, product engineer.

Industrial engineers combine the knowledge and skills of mathematics, physics and social sciences with engineering analysis to optimize the design of production integration system. Make full and effective use of the human and other resources invested in the system to achieve the maximum output of the system. Industrial engineers design and optimize a production system (product assembly line) to make full and effective use of human and other resources put into the system, eliminate (reduce) all kinds of waste and realize the maximum output of the system. They are assistants, advisers and think tanks of leaders at all levels. Through their work, help managers find problems, make correct production and operation decisions, and provide scientific basis for management. An integrated industrial production system consisting of people, things, information, equipment and energy, to put it bluntly, is that there is still a lot of room for industrial engineers to play this industrial project, which is divided into many types.

Specifically, if a company wants to do organizational structure design, or change, position positioning and division of labor, it can consult a professional management consulting company, such as Ou Yingmingde Management Consulting Company, and there are many cases in this regard.