Calculation formula of wool fear number

commonly used formulas for calculating the number of sweaters

The order for calculating the number of sweaters is: back-> front-> sleeve width-> lower column

formula for calculating back:

number of chest width in back = number of chest width x number of body square

number of stitches in back = number of feet width x number of feet square

height of back. X body square revolution+sewing loss

back shoulder width = (shoulder width-correction value) x body square revolution = (clamping width-correction value) x body square revolution+sewing loss

back neck width = (collar width-correction value) x body square revolution

back single shoulder needle number < 2

the number of turns of the back panel shoulder tilt = the number of turns of the back panel shoulder tilt x body square

the number of clips collected on each side of the back panel = (the total number of chest width-the total number of shoulders width) /2

the number of clips collected on each side of the back panel = the clip width X.35

the number of turns of the back panel collar depth = the number of turns of the back panel collar square+the seam loss

the number of clips collected on each side of the back panel collar position.

formula for calculating front image:

number of chest width of front image = (chest width +2)X number of body squares

number of stitches of front image = (foot width +2)X number of body squares

height of front image = height of foot x number of revolution of foot squares

total revolution of front image length = (body length-foot) X-body square revolution+sewing loss

front width of collar = (collar width-correction value) x-body square revolution

front width of single shoulder needle = (total shoulder width-collar width revolution) /2

front width of shoulder oblique revolution = shoulder oblique revolution x-body square revolution

front width of each side of clip = (total chest width revolution) 2

the number of turns of the front width per side = the width of the clip X.3

the number of turns of the front collar depth x the number of turns of the body square+the sewing loss

the number of stitches on each side of the front collar position = (the total number of the collar width-the number of the front collar flat) /2

The front sleeve tail is generally about 5CM high (that is, the number of turns from the yarn hanging position to the hole picking position) X body square count

needle opening count of sleeve mouth = (sleeve mouth width X2)X sleeve mouth square count

sleeve mouth high revolution = sleeve mouth height x sleeve mouth square revolution

total revolution of sleeve length = (sleeve length-sleeve mouth height) X.95X body square revolution+sewing loss

needle remaining count at sleeve tail = (revolution from yarn hanging in the back to hole picking position) X square count

total count of sleeve width = sleeve width X2X1.5X square count

number of clips collected on each side of sleeve width = (total count of sleeve width-number of needles left at sleeve end) /2

number of clips collected on sleeve width = number of clips collected from back to yarn hanging position-number of square turns of sleeve width X1.5CM

number of needles added on each side = 2

the number of revolutions from the sewing of the sleeve width to the clamping = generally about 3CM

The formula for calculating the lapel is:

Lapel opening = lapel circumference x lapel square count

Lapel rotation = lapel height x lapel square revolution

Note: if the lapel is a pit (strip) weave, generally, the round neck is beveled, and the V lapel is opened at the bottom.

Needle opening method:

Bread is opened in Siping, Sanping and Zhudi, and wicker is beveled.