How to debug the steel pipe straightener

1. Strictly control the diameter of the straightening steel pipe, and do not transport the steel pipe whose diameter specification is larger than that adjusted by this machine into the machine, otherwise it will damage the machine or the steel pipe.

2. Conduct initial inspection on the steel pipe to be straightened, and conduct pre-straightening treatment on the steel pipe with serious deformation, butt joint or flattening and welding objects on the surface.

3, steel pipe into the machine hand should be held at a distance of 65438 plus or minus 0 meters above the pipe head, steel pipe as soon as possible. The operator should avoid the side of the steel pipe to prevent the steel pipe from hurting people.

4. If the machine does not rotate or the steel pipe does not move forward during the work, stop the machine immediately and press the "reverse" button to exit the steel pipe. Or stop to find out the reason, and then continue to work after troubleshooting.

At the same time, the equipment has the functions of cleaning the ash scale, rust scale and painting on the steel pipe surface. Solve the problem that the steel pipe rusts and corrodes after a long period of sun and rain, the pipe wall becomes thinner, and it is easy to bend in the process of construction, disassembly and handling, which leads to potential safety hazards in scaffolding steel pipe erection. The machine has the functions of straightening, derusting and painting, which greatly reduces manual labor and improves work efficiency.

Extended data:

The motor drives the reducer to slow down and then drives the upper and lower steel wheels, and then drives other steel wheels to rotate through chain connection. With the straightening and rotation of the steel wheel, the two scrubbing machines rotate at high speed, thoroughly removing the surface corrosion and residual putty slurry on the straightened steel pipe. Finally, the painting and renovation of the steel pipe are completed by the oil injection device.

After straightening, the surface of steel pipe has no indentation and shrinkage, which is better than the standard formulated by the Ministry of Construction. At the same time, the equipment has the functions of cleaning the ash scale, rust scale and painting on the steel pipe surface. Effectively solve the problem that the steel pipe rusts and corrodes after a long period of sun and rain, the pipe wall becomes thinner, and it is easy to bend in the process of construction, disassembly and handling, which leads to potential safety hazards in scaffolding steel pipe erection.

When the steel pipe enters the machine, the steel pipe should be laid flat, and the hand should be held at a distance of 1 m from the pipe head. When the steel pipe automatically enters, release the hand as soon as possible, and the operator should avoid the side of the steel pipe to prevent the steel pipe from hurting people. When the steel pipe leaves the machine, you can hold the front end of the steel pipe and advance synchronously with the steel pipe.

Baidu encyclopedia-steel pipe straightener