How to make a picture of water transfer printing

making water transfer printing paper → soaking the printing paper → pattern transfer → drying → finished product

Firstly, the first step: making water transfer printing paper, processing it by computer according to the required patterns, then outputting the negative to make a printing plate, printing various desired patterns on the base paper (which has been processed), and finally printing cover oil on the base paper with the printed patterns. One method is to use a color laser printer to directly print the pattern on the water transfer backing paper and then carry out water transfer printing.

step 2: soak the floral paper. Put the printed decal in water, soak it for 3 seconds and take it out of the water until it can be transported by sliding. Be careful not to soak for too long, otherwise it will dissolve the glue on the paper surface.

step 3, transfer the pattern. Firstly, the surface of the transferred object is treated, then the soaked decal is transferred to it, and then the excess water is scraped off and dried.

step 4: drying. Put silica gel or other materials into the oven and bake at 14℃ for 2min；; Plastic items are baked at 7℃ for 6min；; Candles, helmets or tempered glass are not baked.

step 5: finished product. Spray a layer of transparent finish paint on the flower surface of the baked silica gel product, and dry it for 12 hours, so that the flower surface and the decoration can be permanently combined. You can do it without this process, but the fastness is not good. Extended information

Silica gel products made by water transfer printing will not pollute the products during consumption, and the qualified rate of processed products is high. The pattern is rich in layers and colorful. Can be set in ten colors, with strong adhesion;

it can be tested by repeated rubbing, etc., and it can reach the international standard completely. The above is an introduction about which products can be used in water transfer printing. Water transfer printing technology is widely used. It can make tens of thousands of water transfer printing patterns, and can also be customized according to your favorite patterns. All products that can spray oil can do water transfer printing processing.