What problems should be paid attention to when installing turning tools?

1, the blade clamping is reliable. The contact surfaces of the blade, cutter pad and cutter bar should be closely attached to withstand impact and vibration, but the clamping force should not be too large and the stress distribution should be uniform to avoid crushing the blade.

2, chip removal is smooth, and there is no obstacle on the front of the blade, which ensures smooth chip removal and is easy to observe.

3, easy to use, and it is convenient and quick to replace the blade and replace the new blade. Compact structure of small tools. Under the condition of meeting the above requirements, make the structure as simple as possible, and make it easy to manufacture and use.

Extended data:

Machine-clamped turning tool is a turning tool that uses ordinary blade and clamps the blade on the tool holder through mechanical clamping. This tool has the following characteristics:

1, due to the improvement of tool durability, the use time is longer, the tool changing time is shorter and the production efficiency is improved.

2. After re-grinding, the size of the blade will gradually decrease. In order to restore the working position of the blade, the blade adjustment mechanism is usually set on the turning tool structure to increase the regrinding times of the blade.

3. The end of the pressure plate used to press the blade can play the role of chip breaker.

Baidu Encyclopedia-Flip Tool