Why use professional tapping oil for tapping?

Why do you have to use professional tapping oil for tapping? Instead of using other engine oil, emulsion, peanut oil and rapeseed oil as tapping oil? Tapping is available in many metal processing factories, but professional tapping oil is rarely used. Many factories have used substitutes for more than ten years and have long been used to them. I think there is no problem. No problem is often the biggest problem, because you have never used real tapping oil, and you think the present situation is the best. That's because you have no comparison, no comparison, and often a better solution is out of your sight. If you can't take a long view, you will lose more. Maybe you think there is nothing wrong for a while, and once something goes wrong, it may be fatal and make you unprepared. 18 1-2963-9559

Let's talk about it first What is the purpose of tapping teeth with tapping oil and what role can it play? In reality, many experts tap teeth by hand, and they all know that tapping teeth with a little oil will have high smoothness and high thread bite. It has become common sense to tap teeth with oil, but it is definitely unclear for operators to really understand why tapping teeth should be oiled. In fact, tapping teeth with oil has three main purposes. Good tapping oil will discharge machining chips, which is mentioned by many people, especially some machining materials with poor chip discharge. To sum up, tapping oil is cooled during tapping. When the faucet is cutting, the temperature of the faucet rises sharply. If it is not cooled, the faucet is easy to burn out, which leads to a sharp decline in the strength of the faucet and affects its durability. Followed by lubrication. When the tap is cutting, if it is not oiled, the cut thread surface is easy to be rough and unsmooth. Thread quality is seriously affected, and the third is chip removal. A large number of iron chips (mainly cutting taps) will be produced during tapping, which are easy to stick to threaded holes and taps. At this time, processing accessories that are indispensable for breathability are needed. ? Of course, there are many kinds of tapping oils with different effects. Improper use can easily lead to misunderstanding and cause unnecessary losses. Jia Weiao has seen it before? A customer tapped with diesel oil before buying Javier tapping oil. At that time, there was a phenomenon that the faucet was always broken. Later, it was replaced by Garvio's special tapping oil, and there was no such phenomenon. In fact, diesel oil is not suitable for tapping, because diesel oil is more viscous than tapping oil, and its lubricity is poor, which leads to the phenomenon that iron chips always stick to the tap, which leads to the tap breaking. In fact, not all oils are suitable. Let's talk about another customer case of Jiawei tapping oil: a customer who bought Jiawei stainless steel tapping oil made a new product in their factory one day. Changed the material, it's cold-rolled plate. As a result, the chip got stuck on the cutting edge of the faucet. Because of the poor chip removal of cold-rolled plate, tapping oil with the same viscosity as tapping stainless steel cannot be used, and the formula should be slightly adjusted. For laymen, the first reaction at this time is that there is something wrong with the quality of your tapping oil . . Jarvio's tailor-made formula is often targeted, so we have to cooperate with each other and find specific reasons to better solve the problem. 18 1-2963-9559

Cheap tapping oil is used on the surface, and the quality is not guaranteed. What you lose is a lot of invisible costs that are difficult for eyes to see, such as the cost of changing faucets, labor costs, customer return costs and so on. Good oil will improve the efficiency of your factory (how high the labor cost is now, save a little oil money, and subsidize several times of labor, tapping 20 thousand a day, which leads to a long waste of time in changing taps and adjusting machinery. Don't refuse to make progress just because others are content with the status quo!

Now the competition in factories (manufacturing industries) is fierce, and labor costs are soaring. Changing your ideas within your control can help you save real costs. Poor oil will make your burden heavier and you may fall into an infinite loop. Think about it, seemingly cheap oil-shortening the life of equipment-may break down-reducing labor efficiency. (High labor cost)-The quality of the products made is not good-The customer complains-It may have to be reworked-How big is this loss, especially now that the labor cost has been rising. If the tapping machine stops frequently, the defective rate is high and the materials are wasted, and now the materials are rising sharply. Use professional tapping oil to tap your teeth, and these expenses can help you save. . .