What should I do if I can't upload the recruitment photos of public institutions on the Urumqi Personnel Examination Network? urgent

Dear, the photo specified here must be in jpg format, and it must be less than 20 K. It is not allowed. Find a positive photo. You can take one with a digital camera or scan the photo into a digital format. Of course, the most ideal thing is to take a 2-inch photo in the studio. According to the requirements of 20 1 1 civil servant registration photos, we will handle one together.

Open your photo in ps, click the cropping tool on the right, and fill in the parameters in the schematic diagram 1 in the cropping parameter settings above (the photo size of civil servants registered for this exam is 2 inches, less than 20k).

Note: The "2-inch" in the recruitment announcement of the Ministry of Personnel and the "2-inch digital photo" in the ID photo are not just the parameter settings in the following figure. But another notice from the personnel department says1-2 cm; 2-3cm high. I estimate that the following parameters are copied from last year's documents. After telephone consultation, the other party thinks that as long as the photo is printed as a 2-inch photo, the portrait can be clearly distinguished, and the file is less than 20k, it is considered qualified. So please feel free to follow this tutorial.

Supplementary note: different provinces require different formats, and everyone can control the width and height freely.

For example, 70 pixels * 100 pixels are needed. Then please fill in the width of ps 70pix and the height of PS 100pix.

2. Place the mouse on the photo, select the appropriate area, and double-click to confirm to finish cutting. Beginners need to take their time and cut out satisfactory photos.

3. Use the menu "File-Save as web Format", the preset format is jpeg, and adjust the quality until the image file size is less than 20K.

4. After warehousing, it is a 2-inch digital photo of less than 20k required by the examination announcement!

See/%B7% E7% Ba% AE% D3% EA/blog/item/96EA8F450B31892CFCA3B5.html for the detailed operation diagram. I hope it will be helpful to you.

Method 2: Create a new file in PS with the width of1120 pixels and the height of 170- 180 pixels, then open the photo to be reduced, press the V key, and the mouse will become a drag tool, and click it in the picture window.

It is estimated that your original document must be very large and only part of it is displayed.

Select the window of the new file, press Ctrl+0 (zero) to maximize this window, then press Ctrl+- (minus sign) to reduce the picture in the window, and press Ctrl+t to make this layer enter zoom mode. You can see a box around your full-size picture, and there are several small squares in the middle of four corners and four sides. Hold down the Shift key, click a corner box and move the mouse.

Note that in zoom mode, if you don't press the shift key to move the four-corner box or the four-border box, the aspect ratio of the picture will change, and only press the shift key will you enlarge it proportionally.

Then, save the file as, give it a name, choose JPG as the format, save it, and ask what kind of image quality you want. From 1- 12 file, first save it as 12 file, and then right-click the folder where this new picture is saved to see the properties of this picture file. If it exceeds 20K, if it exceeds 20K,