Safety production 365 test questions (4)

195. According to the provisions of Order No. 302 of the State Council in 2001, local people's governments at all levels shall convene at least one working meeting on preventing serious safety accidents within ( ) time.

A. Every 2 months B. Every quarter C. Every six months

196. According to the provisions of the State Council’s Order No. 302 of 2001, local people’s governments or government departments obstruct or interfere with the investigation of extraordinarily large events. If the person responsible for a safety accident is held administratively responsible, the main leader of the local people's government or the official person in charge of the department shall be given ( ) according to the seriousness of the case.

A. Removal or expulsion from public office B. Demerit or warning C. Demotion or dismissal

197. A workplace where the room temperature is higher than ( ) degrees Celsius and the relative humidity exceeds is called a high temperature workplace.

A. 30℃, 80% | B. 35℃, 80% | C. 30℃, 85%

198. The perimeter of the grid must not be larger than ( ).

A. 5 cm B． 10 cm C. 15 cm

199. The main cause of death from fire is ( ).

A. Burned to death B. Suffocated or poisoned C. Trampled

200. When using a fire extinguisher to put out a fire, the standing position of the person should be ( ).

A. Upwind outlet B. Downwind outlet C. Crosswind direction

201. Tower cranes, well-shaped frames, etc. that are more than 30 meters high must be set up at the point of ________.

A. Lighting lamp B. Red signal light C. Indicator light

202. The state stipulates that the weight of a helmet should not exceed ( ) grams.

A.400 B.500 C.600

203. Among the following gases, ( ) is a flammable gas.

A. Carbon dioxide B. Acetylene C. Nitrogen

204. In the workplace of electric welding operations, the fire protection equipment that cannot be installed is ( ).

A. Dry powder fire extinguisher B. Dry sand C. Water

205. For lighting circuits at the construction site at night, the height of the lamp head must not be lower than ( ).

A. 2.5 meters B. 3.5 meters C． 5 meters

206. ( ) The working environment is not suitable for electric welding.

A. Air circulation B. Dry and cold C. Hot and humid

207. Generally speaking, the thickness of ramp boards and springboards should be ( ) centimeters.

A.5 B.10 C.15

208. The correct way to identify canned chemicals is ( ).

A. Use the sense of smell B. Based on experience C. Check the label content on the outside of the container

209. The managers of warehouses that store chemical dangerous goods must be equipped with reliable ( ).

A. Labor protection supplies B. Safety supplies C. Portable fire-fighting equipment

210. Warehouse for storing chemicals ( ).

A. Do not store acid and alkali at the same time B. Can store acids and bases at the same time C. All kinds of chemicals can be stored arbitrarily

211. In a hot environment, because body heat cannot be dissipated in time and body temperature is imbalanced, it is easy to cause ( ).

A. Heatstroke B. Dehydration C. Collapse

212. The elevator driver sends a danger signal to any person ( ).

A. Everyone must obey B. Except for the commander, you may not obey C. Decide after analyzing the situation

213. Elevator drivers must obey the instructions of ( ) when cooperating with maintenance operations.

A. Leader B. Team leader C. Elevator maintenance staff

214. Freight motor vehicles are not allowed ( ).

A. Carrying flammable and explosive items B. Mixing people and goods C. Carrying moisture-prone items

215. When using a forklift, if there are large goods blocking the driver’s view When, it should be ( ).

A. Driving in reverse B. Driving normally C. Unable to drive

216. The occupational disease diagnosis and appraisal office shall organize an appraisal within ( ) days from the date of acceptance of the appraisal.

A.30 B.60 C.90

217. For new construction, reconstruction, expansion, technological transformation, and technology introduction projects, occupational diseases should be reported within ( ) days from the date of completion acceptance Hazard items.

A.10 B.20 C.30

218. During thunderstorms, do not go within ( ) meters of the grounding conductors of high-voltage poles, iron towers, and lightning rods.

A. 10B. 20C． 30

219. The removal of scaffolding must be done ( ).

A. Layered from top to bottom B. Layered from bottom to top C. Upper and lower layers at the same time

220. Most of the electric shock accidents are caused by ( ) casualties.

A. The human body receives electric current and is shocked B. Burn C. Electrical shock

221. ( ) is not a factor that affects the resistance of the human body.

A. Wear more clothes b. Excessive sweating c. Damaged

222. Railings ( ) meters high should be installed on both sides of the ramp plate, and guard plates should be installed when necessary.

A.0.5 B.1 C.1.5

223. When digging trenches, foundation pits, etc., the excavated soil should be piled outside the trench edge ( ), and the height must not be Higher than 1.5m.

A.1 meter B.2 meter C.3 meter

224. After using ( ), the strength test of the rope must be carried out.

A. 1 month B. 2 months C. 3 months

225. For high-rise buildings with a height of more than 24m, the length of the protective shed at the ground floor entrance should not be less than ( ) .

A. 3 meters B. 4 meters C. 5 meters

226. Occupational safety and health surveillance physical examination, the cycle of front-line workers is ( ).

A. 3 years B. 2 years C. 1 year

227. Living noise is generally below ( ) dB and has no direct physiological harm to people.

A.80 B.85 C.90

228. In order to ensure the safety of workers, when the height of a high-rise building exceeds ( ) meters, double-layer protection facilities should be installed for cross-cutting operations.

A.10 B.20 C.24

229. Among the following occupational diseases, the occupational diseases with physical factors are ( ).

A Coal workers' pneumoconiosis B Chemical burns C Local vibration disease

230. Wire ropes and other ropes used in suspended and hanging scaffolds and hanging baskets should be tested for ( ) times the static load.

A, 1 B, 1.5 C, 2

3. Questions and Answers

231. What is the purpose of formulating the "Safety Production Law"?

Answer: In order to strengthen the supervision and management of production safety, prevent and reduce production safety accidents, protect the safety of people's lives and property, and promote economic development.

232. What is the purpose of formulating the "Regulations of the State Council on the Investigation of Administrative Liability for Serious Safety Accidents"?

Answer: In order to effectively prevent the occurrence of major safety accidents, we must strictly investigate the administrative responsibility for major safety accidents and protect the safety of people's lives and property.

233. What is the purpose of formulating the "Regulations on the Safety Management of Hazardous Chemicals"?

Answer: In order to strengthen the safety management of hazardous chemicals, ensure the safety of people and property, and protect the environment.

234. What is the scope of application of the "Safety Production Law"?

Answer: It applies to the production safety of units engaged in production and business activities within the territory of the People's Republic of China.

235. What is the scope of application of the "Regulations on the Safety Management of Hazardous Chemicals"?

Answer: The production, operation, storage, transportation, use of hazardous chemicals and the disposal of waste hazardous chemicals within the territory of the People's Republic of China must comply with these regulations.

236. What items are included in the “Regulations on the Safety Management of Hazardous Chemicals”?

Answer: Dangerous chemicals referred to in these regulations include explosives, compressed gases and liquefied gases, flammable liquids, flammable solids, self-igniting items and flammable items when wet, oxidants and organic peroxides, There are drugs and corrosives, etc.

237. What categories of major safety accidents are mentioned in the "Regulations of the State Council on the Investigation of Administrative Liability for Serious Safety Accidents"?

Answer: ***Seven categories, including:

(1) Extraordinary fire accidents;

(2) Extraordinary traffic safety accidents;

(3) Extraordinary construction quality safety accidents;

(4) Extraordinary safety accidents involving civilian explosives and hazardous chemicals;

(5) Extraordinary safety accidents in coal mines and other mines ;

(6) Serious safety accidents in boilers, pressure vessels, pressure pipelines and special equipment;

(7) Other major safety accidents.

238. What are the main obligations of production and business units in terms of production safety?

Answer: Production and business units must

1. Comply with the "Safety Production Law" and other laws and regulations related to production safety;

2. Must strengthen safety Production management 3. Establish and improve the safety production responsibility system; improve safety production conditions.

239. What aspects should the safety production responsibility system include?

Answer: The safety production responsibility system should include:

(1) Clear and specific safety production requirements;

(2) Clear and specific Safety production management procedures;

(3) Clear and specific safety production management personnel;

(4) Clear and specific safety production training requirements;

(5) Clear and specific safety production responsibilities.

240. What aspects do perfect production safety conditions include?

Answer: Safety production conditions refer to the "hardware" conditions of facilities, equipment, places, environment and other aspects of production safety in production and operation units. These conditions are matched with the safety production responsibility system.

Perfect safety production conditions refer to:

(1) The workplace meets safety production requirements;

(2) Production equipment meets safety production requirements;

(3) Special workplaces meet production safety requirements.

241. What are the main responsibilities of people's governments at all levels in work safety?

Answer: The main responsibilities of people's governments at all levels in work safety are:

(1) Strengthen the leadership of production safety, support and urge relevant departments to perform safety production supervision and management Functions;

(2) Local people's governments at and above the county level shall coordinate and resolve major issues existing in the supervision and management of production safety.

241.What are national standards?

Answer: National standards refer to technical specifications formulated by the standardization administrative department of the State Council or other relevant departments for technical requirements that need to be unified nationwide. The standardization administrative department of the State Council shall prepare plans, organize drafting, unified approval, numbering, and release.

242.What are industry standards?

Answer: Industry standards refer to technical specifications formulated by the relevant competent authorities of the State Council for technical requirements that do not have national standards but need to be unified within a certain industry across the country. Therefore, under the premise that the technical requirements related to production safety need to be unified across the country and there are no national standards, industry standards that can ensure production safety can be formulated.

243. What is the significance of the country’s implementation of a liability investigation system for production safety accidents?

Answer: For the first time, the country has announced the implementation of a liability investigation system for production safety accidents in the form of the Basic Law. This means that any person responsible for a production safety accident must be held accountable accordingly. When implementing the system, we must implement the spirit of "everyone is equal before responsibility" and resolutely overcome the idea of ??punishing people according to individual circumstances. Whoever violates the production safety management system and causes a production safety accident must be resolutely investigated and will never be tolerated or accommodated. , let it go. This is of great significance for punishing and educating those responsible, prompting relevant personnel to increase their sense of responsibility, ensuring that laws and regulations related to production safety are observed, and ensuring production safety.

244. What responsibilities does the main person in charge of a production and business unit have for the unit’s production safety work?

Answer: The main person in charge of the production and business unit has the following responsibilities for the unit’s safety production work:

(1) Establish and improve the unit’s safety production responsibility system;

(2) Organize the formulation of the unit's safety production rules and operating procedures;

(3) Ensure the effective implementation of the unit's safety production investment;

(4) Supervise, Inspect the unit's production safety work and eliminate hidden dangers of production safety accidents in a timely manner;

(5) Organize the formulation and implementation of the unit's emergency rescue plan for production safety accidents;

(6) Timely , Report production safety accidents truthfully.

245. What are the regulations for safety education and training for employees by production and business units?

Answer: Production and business units should provide education and training on production safety to employees to ensure that employees have necessary production safety knowledge, are familiar with relevant production safety rules and regulations and safe operating procedures, and master the safe operations of their positions. Skill. Employees who have not received education and training on safety production are not allowed to work.

246. What are the general safety basics of fire and explosion prevention?

Answer: (1) Personnel engaged in flammable and explosive production operations must undergo fire safety training by the competent department and obtain a certificate through examination before they can take up their posts.

(2) Strictly implement the fire and explosion prevention rules and regulations formulated by the enterprise, and prohibit illegal operations;

(3) It is strictly prohibited to engage in flammable and explosive operations (production, use, transportation , storage) or in flammable and explosive storage places;

(4) When using, transporting, and storing flammable and explosive items, safety operating procedures must be strictly followed;

(5) The use of open flames at the work site must be reported to the competent department for approval, and safety precautions must be taken;

(6) Do not use electronic products that can produce static sparks (pagers, mobile phones) etc.) into flammable and explosive dangerous places;

(7) For general fire and explosion-proof equipment equipped in the workshop, you should learn to use it and do not misappropriate it casually.