Banfang and special masters of the handbag factory where handbags are processed

The so-called handbag design is to use paper grids as materials based on the original identification of the handbags (or leather drawings or photographs) to design the shapes of the components of the handbags, and put various marks on the paper grid components. A job in handbag making.

In the handbag factory, the department engaged in this kind of work is called the benfang, and the personnel engaged in this kind of work are called the special master or the benfang master, or the handbag master, or the pattern maker, or the sample designer. First, in handbag factories, their products are generally based on customer requirements. They usually provide the actual handbags (original identification) or various pictures to the handbag factory. This kind of provision is the basis for the special master to make the special request. The original identification is made by the special master. We take the lead and re-produce several products that meet the requirements, so Benfang is the sample production department.

Second, since Benfang is responsible for sample production, Benfang is the first to understand the production process and technology of the product, as well as the total production workload and product quality requirements of the product. Therefore, Benfang is the engineering and technical department of the handbag factory.

Thirdly, the accounting department of the handbag factory obtains information such as product process prices, raw materials and their quantities from Bianfang, and carries out production cost budgeting based on raw material prices.

The Materials Department obtains the types and quantities of required purchased materials from Benfang and carries out the material supply work of the department.

The cutting department obtains the custom-made cutter molds from the paper grid and carries out the work of laying out and cutting materials.

The production workshop obtains the production processes and technologies from Bianfang to organize the production line and production management work.

The work of room identification is the master of all work in the entire handbag manufacturing factory; it is the technical manager of the handbag factory. First, analyze the overall structure of the original identification (or picture) provided by the customer and distinguish the primary and secondary patterns.

Second, analyze the shape of the components of the original identification (or picture).

Third, the relevant information that makes up this bag includes:

1. The number of paper grids. 2. Specifications, colors and quantities of hardware and plastic sealing materials. 3. Number, specification, color and quantity of zippers and webbing. 4. Binding and bit aggregate specifications. 5. Needle spacing (generally 8 stitches/inch).

Fourth, writing production process.

Fifth, calculate materials.

Sixth, guide the work of the workers who open the room and cut the materials and the workers who distinguish the car.

Chapter 3 Extraordinary Tools and Their Use

Section 1 Extraordinary Tools

1. A steel ruler in inches or centimeters.

2. A soft measuring tape in inches or centimeters.

3. One garden rule.

Four. A knife (including blade).

5. A physical handbag (or photo or picture).

6. One pencil and one eraser.

7. Some 250P--300P paper.

8. A table one meter long, 50 centimeters wide and 80 centimeters high.

9. The specification is 100×50 cm. One piece of rubber pad.

10. Position the piece of iron.

11. A movable stool.

The above is a set of handbag special tools that every special staff member must have when working.

Section 2: The use of special tools

1. Steel ruler: 1. Used to measure the length of straight, hard materials. 2． Dot it with the lower left corner. 3. Intermediate line

2. Soft measuring tape: 1. Measure the length and circumference of curved, wrinkled, and soft materials.

3. Garden rules: 1. Draw an arc. 2． Enlarge the paper grid. 3. Hit and yell. 4. degree position.

Four. Introduction: 1. Hit the cross position. 2． Paper grid.

5. Handbags (pictures): 1. Special reference.

6. Pencil and eraser play, drafting or modifying patterns.

7. 250P - 300P paper, special material.

8. Table: Pad material used to keep the paper grid blades straight and protect the tabletop when the grid is out of order.

9. Positioning iron: When two pieces of paper overlap, use a positioning iron to fix the position to prevent displacement.

10. Table: special support.

11. Movable stools: Special personnel need to stand and sit sometimes, and they need to move from all directions. The stools must be movable.

Section 3: Precautions when inserting knife and paper

We demonstrate the gesture of holding the knife in the practical class.

When using the knife to insert paper, press the center of the steel ruler with your left hand, and press the knife with your right hand. The edge of the knife is close to the edge of the steel ruler. The direction of the pulling force is straight to the direction where the person who breaks the rule is standing. If the force is to the left, the steel ruler will be displaced; if the force is to the right, the insert knife will break away from the edge of the steel ruler, and the paper grid under both will be unqualified.