Where can I get an aerial work permit in Shenzhen?

In the work safety supervision and management bureau.

At present, aerial work permits are divided into two categories, one is aerial maintenance, installation and demolition, and the other is aerial erection. The two certificates correspond to different jobs. When you apply for a certificate, you must know what kind of work your job belongs to. If you really don't know, you can find the staff of the local emergency management department to study, such as Shenzhen. You can go to the message area of this article to find the inquiry method of the staff of the application center for aerial work permit and ask the teacher which one you need to apply for.

2. The Aerial Work Permit is also called the Work Permit for Installation, Maintenance and Demolition at Height, Work Permit, Special Work Permit, Climbing Permit and Work Permit at Height. The issuing authority: the certificate of the Emergency Management Bureau (formerly the Safety Supervision Bureau) is reviewed once every three years and renewed once every six years. After registration, the school will organize training and examination in a unified way. After passing the theoretical and practical results, the issuing authority will issue certificates.

Generally, the handling of aerial work permit can be divided into the following two steps:

1, special operations personnel must go to the local hospital at or above the county level for physical examination before attending the training, and those who pass the physical examination can participate in the theoretical training and practical training of safety technology corresponding to their special operations;

2. When signing up for training, you need to fill in the Application Form for Training of Special Operators, hand in three one-inch recent photos, one copy of ID card and one copy of academic certificate, which will be reviewed and sealed by each unit.

The Work Permit at Height is issued by the State Emergency Management Bureau. We all call it working at heights more than 2m (including 2m) from the reference plane of falling height. The master engaged in this work must undergo safety technical training, and then pass the examination, and then the emergency management bureau will issue a work permit at height. This is a special operation certificate, and only the master who has obtained this certificate through examination and training can take part in the work related to high altitude. The aerial work permit is the certificate for special operators to take up their posts, and the aerial work permit is a special work permit that operators engaged in climbing, aerial installation, maintenance and demolition must obtain. The aerial work permit is a special type of work permit, which generally means that some enterprises will require employees to hold certificates. Therefore, the aerial work permit is a stepping stone to aerial work. Nowadays, many aerial work jobs in society need aerial work permits, and there is no way to carry out aerial work without them. Therefore, the aerial work permit has a high gold content for aerial workers to carry out aerial work.

Legal basis:

Article 1240 of the Civil Code of People's Republic of China (PRC) stipulates that if anyone engages in high altitude, high pressure and underground excavation activities or uses high-speed rail transportation to cause damage to others, the operator shall bear tort liability; However, if it can be proved that the damage was caused by the victim's intention or force majeure, it will not be liable. If the infringer has gross negligence in the occurrence of the damage, the liability of the operator may be reduced.