Ijikan treadmill f4 failure

Ijicon treadmill F4 failure may be caused by many reasons. The following are some common faults and solutions:

1. The treadmill has no power supply: First check whether the power socket of the treadmill is connected normally and whether the plug is damaged. If the power outlet and plug are normal, check to see if the treadmill's power switch is on. If the power switch is turned on but the treadmill still won't start, you need to check whether there is a problem with the treadmill circuit board or power line.

2. Running stuck or friction failure: This is usually caused by the attachment of the treadmill belt or excessive use. First you can try to clean the belt and lubricate the belt. If the friction problem persists, you need to check that the walking belt is properly installed on the treadmill.

3. Difficulty in speed change: If the treadmill has difficulty in speed change, you need to check whether the automatic control board is normal. Also make sure the treadmill provides the correct input voltage. In this case, it may be necessary to replace the speed control circuit board or replace the control wiring.

4. Screen display failure: If the screen cannot display the treadmill data, you need to check the data transmission and power lines. If these parts are OK, the screen may be faulty and the entire screen segment may need to be replaced.

Please note that treadmill failure can be caused by multiple factors, so care and patience are required. If you are unable to resolve a treadmill malfunction, consider hiring a professional to repair it.