Job Recruitment Website - Recruitment portal - Job responsibilities of engineering testers

Job responsibilities of engineering testers

Job responsibilities of engineering testers (selected 15 articles)

Now more and more people will come into contact with job responsibilities. Any job responsibility is a combination of responsibility, power and obligation. Use as much power as possible to undertake how many responsibilities, and use as much power and responsibility as possible to complete how many obligations. Any separation will cause problems. So how to formulate job responsibilities to play its greatest role? The following are the job responsibilities of the engineering testers I have compiled for you for your reference, hoping to help friends in need.

Job responsibilities of engineering testers. The on-site tester must be a technician who has passed the training and examination by the Quality Inspection Center of the Ministry of Railways and obtained the post certificate of the tester.

2, operators must be in strict accordance with the relevant provisions of the current national and industrial standards and norms for sampling, sampling frequency and quantity to meet the requirements of the standard.

3. Perform the corresponding responsibilities in the Control Procedure for Monitoring and Measuring Devices and the Control Procedure for Monitoring and Measuring Products, and realize the objectives of engineering quality, environment and occupational health and safety.

4. Testers should prepare test plans according to the quantities in the construction drawings, and implement them according to the construction conditions during construction.

5. The production of sand, stone, cement, fly ash, ground slag powder, additives and on-site concrete specimens shall be inspected according to the required sampling quantity.

6. Before concrete construction, test the water content of sand and gravel, convert the theoretical mixture ratio into the construction mixture ratio, fill in the construction ingredient list carefully, strictly measure it during construction, ensure the accurate mixture ratio, and keep samples in time during construction.

7. Be responsible for the sampling and inspection of steel bars, prestressed steel bars (wires), steel bar joints, anchorages, fixtures, connectors, corrugated pipes and waterproof materials.

8. In the process of subgrade construction, testers should measure the water content of filler, subgrade compactness, foundation coefficient, porosity, EVD and Ev2.

9. Be responsible for the management, periodic verification and identification of field test instruments.

10. The retained samples shall be marked, including project name and location, specifications and models, sampling date, etc. Before the sample is sent for inspection, the inspection sheet should be filled in, and the contents of the inspection sheet should be consistent with the sample identification.

1 1. Collect, fill in, count, analyze, summarize, transmit and save test data in time, and summarize and report them regularly.

Job responsibilities of engineering tester 2 1. After the raw materials enter the site, ministry of materials and equipment will inform the operator, who will be responsible for sampling all raw materials in this project.

2, responsible for the supervision and inspection of all kinds of raw materials, timely sorting test results, timely report.

3, all kinds of raw materials, sand, stone, cement, etc. Must be strictly in accordance with the batch, reply inspection, timely request reports, establish a good report ledger, and put an end to the use of unqualified materials.

4. Check whether the material certificate purchased by the material department and the material certificate are consistent with the batch and batch of materials entering the site, and make registration and acceptance records.

5. In accordance with the provisions, take a sufficient number of on-site specimens in time to ensure the representativeness and authenticity of the specimens, and record the position and number of pieces.

6. Make original records of all kinds of raw materials.

7. Fill in, collect, sort out and archive the test data, and keep them in the reference room.

8, responsible for concrete sampling, block forming, registration, block maintenance inspection.

9, responsible for steel, sand, stone, brick and other raw materials inspection.

10, do a good job of on-site concrete affecting, concrete slump, block ledger and original records.

1 1, responsible for all tests on site and inspection.

Job responsibilities of engineering tester 3 1. Love the examination post, be careful, study hard and constantly improve the professional quality.

2. Do all tests in strict accordance with relevant test regulations and test methods, and fill in relevant test data in time (such as test inspection notice, original test records, test records and test reports, test sampling ledger, test ledger, test instrument use records, temperature and humidity records, sample entry and exit ledger, sample retention information, etc.). ). The test record shall not be altered at will (it can be altered according to regulations and stamped with a private seal), and the test report must be reviewed and signed by the technical director of the laboratory, and then submitted to the laboratory director for review and signature.

3. Testers should observe and record all kinds of situations in the test process in detail, and report to the person in charge of this room immediately when finding abnormal phenomena or test results that do not meet the design requirements. The tester shall sign the original records and test reports of the test items and be responsible for the test data.

4. Take good care of the test instruments and equipment, maintain them regularly, and keep them properly to ensure that the test instruments and equipment are in good condition and the values are accurate.

5. Testers should take active actions after receiving the on-site testing task, and complete it with high quality and high efficiency without delay.

6. After the test, clean up the site, arrange the test instruments and data, keep a clean and civilized working environment, and be clean, hygienic, safe and reliable.

7. Strictly keep enterprise secrets, and shall not transmit test technical data without consent. 8. Complete other tasks assigned by the laboratory director and the leaders of the project department.

Job responsibilities of engineering testers Part IV (1) Under the guidance of the test engineer, the test items shall be completed correctly in strict accordance with the test operation procedures;

(2) Earnestly study the business, study hard the test and detection technology, and constantly improve the test and detection level;

(3) Strictly implement various inspection rules and regulations and instrument operation procedures; Conduct all tests in strict accordance with relevant test regulations and test methods;

(4) Fill in the test records according to the technical requirements, and be responsible for the original recorded data; Testers should observe and record all kinds of situations in the test process in detail, and report to the director immediately when finding abnormal phenomena or test results that do not meet the design requirements;

(5) All raw materials entering the site shall be tested in time to ensure the testing frequency. Resolutely refuse to enter the site for raw materials that fail to pass the inspection, and report to the superior leader;

(6) Responsible for the distribution and audit of the project construction proportion. Check the quality of semi-finished products and finished products;

(7) After receiving the field test task, we should take active actions to complete it with high quality and efficiency without delay;

(8) Clean indoor and outdoor environmental sanitation in time, and clean and maintain test equipment in time; Complete the temporary work assigned by the laboratory director.

(9) Fully implement the relevant liability clauses of ISO900 1 quality system and environment, occupational health and safety program documents, and do a good job in the compliance operation of program documents; At the same time, implement the relevant requirements of the quality system of the testing center;

(10) Assist other personnel in this department to do other tests;

(1 1) Cooperate with the supervisor and the owner to check the project quality;

(12) Strictly keep enterprise secrets, and do not spread test technical data to the outside world at will;

(13) Complete other tasks assigned by leaders.

Job responsibilities of engineering testers. After the materials enter the site, ask the material engineer for the quality certificate in time.

Two, according to the provisions of the batch sampling, need to witness the sampling of materials, witness sampling under the supervision of witnesses, and fill in the witness sampling form in time.

Three, the need for inspection samples should be sent in time, and go through the entrustment formalities.

Four, field test, according to the relevant norms and standards and test methods, fill in the test record and issue a report.

Five, according to the moisture content of sand and gravel and the stone content in sand, adjust the mortar mixture ratio in time.

Six, according to the requirements of specifications and standards lien mortar, concrete block, and standard maintenance.

Seven, assist the material engineer to identify the test status of raw materials in time.

Eight, to register the unqualified materials, and truthfully fill in the disposal results, accurately record the original, issue a test report, and hand over the materials to the technical director for preservation.

Nine, responsible for completing other tasks assigned by the leadership.

6 1 job responsibilities of engineering tester, responsible for the management of field test standard maintenance room and field mixing station;

2, according to the standard method to form concrete and mortar test block, check the measurement, slump and mixing time during the implementation of concrete and mortar mixture ratio on the construction site, and make inspection records and maintenance management. Entrust a qualified laboratory to carry out compressive test in time;

3. Be responsible for sampling the raw materials submitted for inspection according to relevant standards and regulations, and be responsible for the representativeness and authenticity of the samples, so as not to miss the inspection. Retrieve the test report in time and submit it to the project librarian for filing;

4. Test the dry bulk density of backfill soil, slump and consistency of concrete and mortar;

5. Samples such as sand, stone, soil and expired cement shall be sampled in time according to standard methods, and entrusted tests shall be conducted in time;

6. Be responsible for the sampling and inspection of on-site reinforcement, additives, semi-finished products of joints and other materials;

7. Ensure that the field laboratory instruments and appliances are in good condition and meet the requirements;

8. Be responsible for on-site temperature measurement;

9. Inform the test conclusion in time, carefully record the test log in time, establish the test account, and be responsible for the authenticity of the test sampling.

Responsibilities of engineering testers 7 1. Cooperate with the calculation and audit of material quantity of each component supplier;

2. The subcontract comprehensive unit price analysis table;

3. Check the quantities with subcontractors every month;

4. Check and declare the number of visas and changes caused by construction;

5. Progress payment statement;

6. Cooperate with the budget department of the company.

7. Contract signing stage: (analysis and implementation of contract terms);

8. Construction stage: (participate in the blue prints.the design, provide the bill of quantities and the budget price of materials, improve the visa forms and changes on the construction site, prepare the output value budget of construction image progress, and review the progress budget);

9. Completion settlement stage: (improve visas and changes, collect and sort out completion settlement data, prepare complete completion settlement documents, conduct settlement audit, and participate in labor settlement audit).

10. Organize the implementation of internal bidding and cooperate with external bidding quotation;

1 1. Master bidding laws and regulations, bidding process, etc.

Job responsibilities of engineering tester 8 1, responsible for testing the company's finished products;

2. Study hard, study hard, improve the professional level, and complete the test task under the leadership of the monitor;

3. Strictly abide by the company's rules and regulations and safety operation procedures, and do not leave the post without authorization;

4. Strengthen business study, be familiar with the business work of this position, carry out product inspection and acceptance in strict accordance with the operating procedures, report problems to the responsible units and the leaders of this department in time, and assist the responsible units to find out the reasons for non-conformity;

5. The inspection records are accurate, clear and complete, and shall not be altered at will;

6. Take care of the initiating explosive device, ensure that the account is consistent, prevent theft and loss, and return or destroy it according to the regulations;

7. Take good care of the company's property, carefully protect equipment and instruments, and report any problems in time;

8, strengthen unity, help each other in the work, carry forward the style, and pay attention to do a good job of unity with other units, complete the tasks assigned by the leadership;

9. Do not test dangerous goods for others without authorization.

Job responsibilities of engineering testers 9 1. Under the leadership of laboratory director and test engineer, carefully complete the test work undertaken;

2. Use instruments and equipment in strict accordance with the operating procedures, so as to check beforehand, maintain, clean, refuel and cover afterwards;

3. Test and test in strict accordance with technical standards, test operation procedures and contract requirements;

4. Make preparations before the test, take samples at the site according to the specified frequency, correctly sample, divide samples and prepare materials, and check whether the operating environment of the value transmission of instruments and equipment meets the requirements of test and detection conditions;

5. Fill in the original test records in strict accordance with the requirements of technical specifications and calculate the test data correctly according to the requirements of standards;

6. Be responsible for the correctness and authenticity of the test records and reports issued, and submit them to the test engineer for approval according to the prescribed procedures;

7. Strictly implement the safety system, check in advance, and check the water and electricity supply when leaving the post to prevent accidents;

8. Seriously study business, study hard new standards, new technologies and new detection methods, and constantly improve the level of test and detection.

Responsibilities of engineering testers: 10 1. Understand the structural principle, performance, adjustment and use of instruments and equipment, and carry out daily maintenance of instruments and equipment.

1, strictly implement the equipment operation procedures, and shall not be changed at will. The operating procedures of this room can only be tested after being approved by technicians and physical and chemical section chief, and the test situation should be reported to technicians and section chief at the same time.

2. The standard solution required for the test must be carefully prepared in accordance with the regulations, and the preparation records should be made as required, and the name, standard concentration and preparation date should be clearly filled in on the label. The test must be prepared and saved as required.

3. The samples shall be registered with numbers and marks, and the numbers shall not be mixed. The original records shall be made carefully, clearly and neatly, and the original records shall not be altered at will. The experimenters shall be responsible for their own experimental results and shall not make mistakes.

4, must be familiar with and correct use of testing instruments and equipment, to do a good job in the maintenance of instruments and equipment, keep this position instruments, equipment, reagents, clean and tidy work site, do a good job in production safety.

5, abide by the rules and regulations at all levels of the enterprise and labor discipline.

6. Complete the temporary tasks arranged by the leaders in time.

Job responsibilities of engineering tester 1 1 1, responsible for the acceptance and registration of samples submitted for inspection;

2. Responsible for customer satisfaction survey and result feedback;

3. Responsible for purchasing management and supplier survey;

4. Responsible for the implementation of purchasing and acceptance of consumable materials;

5. Responsible for the payment declaration of purchasing funds;

6. Responsible for assisting customers to communicate;

7. Be responsible for the numbering, distribution and registration management of the management system;

8. Be responsible for the numbering, registration and filing of internal and external administrative documents of the experimental center;

9, in accordance with the standards, specifications and work instructions for the test work;

10, fill in records, statements and feedback information in time;

1 1, deformation operation instructions and equipment operation procedures

12, complete other work arranged by the leader.

Job responsibilities of engineering testers 12 1. Under the leadership of the technical director of the project department, the testers actively cooperate closely with relevant personnel, strictly and conscientiously perform their subordinate duties, and complete their tasks with high quality.

Two, according to the relevant standards, norms, procedures and inspection and test plan, comprehensively do a good job in inspection and test.

3. Responsible for the sampling and inspection of the materials to be tested, and responsible for the representativeness and authenticity of the samples.

Four, timely extraction test, inspection report, the test results in a timely manner to inform the project technical director and material keeper, and the relevant records and information to the documenter for registration and filing.

5. Responsible for on-site construction test work, such as the determination of water content of sand and gravel, the determination of construction temperature in winter, the inspection of additives, etc.

Six, do a good job of mixing quality control of concrete and mortar.

Seven, do a good job of forming and curing concrete and mortar test blocks, and send them to the laboratory for testing in time.

Eight, responsible for the backfill soil, steel specimen sampling test work.

Nine, responsible for the project department inspection, measuring instruments and equipment management and inspection work, to ensure that all the use of inspection, measuring instruments and equipment are used within the validity period of verification.

Ten, according to the provisions of timely feedback to the relevant departments and personnel documents, materials or information.

Eleven, complete other tasks assigned by the leadership.

Job responsibilities of engineering testers. Under the leadership of the test and inspection engineer, be responsible for the test supervision of the project within the specified scope.

Second, check the contractor's test personnel and test work regularly, record the situation in the engineering test and report to the supervisor at the next higher level.

Three, supervise the contractor's material sampling and testing work, and sign opinions.

Four, supervise the sampling test samples, preparation and test operation, record the test data, fill in the test report.

5. Participate in on-site testing.

Six, complete other supervision work assigned by testing engineer.

Responsibilities of engineering testers: 14 1. To implement the principles, policies, laws and management systems of the metrological work of the state and superior metrological departments. Responsible for the test and inspection of this project department.

2, in strict accordance with the standards, norms and procedures for sampling and testing.

3, timely extraction test report. Fill in the original record carefully and sign it. When recording, you must not resort to deceit or engage in sloppy work. If there are any changes, you should stamp your official seal.

4. Responsible for collecting and saving standards, specifications and procedures related to testing, registration and account establishment, and keeping them properly.

5, responsible for the use of measuring instruments, verification/calibration, maintenance, scrap and establish account card.

6, the establishment of testing instrument report, measurement files. Formulate and implement the configuration plan of measuring instruments in this unit.

7. Participate in the research and application of new technologies, new materials, new methods and new processes.

8. Be responsible for the work related to this business in the operation of the quality, environment and occupational health and safety management system.

9. Participate in the preparation of as-built documents and provide test data.

10, complete the tasks assigned by the leaders.

Job responsibilities of engineering testers 15 1. Testers should conduct tests and inspections in strict accordance with the requirements of standards and specifications. Do a good job in the test ledger and test records, be responsible for the representativeness, authenticity and validity of the specimens, and be responsible for the custody of the specimens to avoid missing the test.

2. Be responsible for the re-inspection of incoming materials, as well as the test, sampling and parts inspection during construction.

3, the operator is responsible for all kinds of commissioned tests, should fill in the test sheet according to the requirements of the commission, and require the test sheet to be clear, complete and accurate.

4, the need to witness the specimen, the operator should be witnessed by engineering supervision personnel, in accordance with the provisions, on-site sampling, sent to the witness laboratory for testing.

5. The operator should put forward the purchase plan of experimental instruments and equipment according to the needs of engineering experiments, apply to the measurement management personnel of the project department in a unified way, and report to the competent department of the enterprise for examination and approval.

6. Operators should test the experimental equipment used in accordance with the metrological management regulations, and use it only after passing the verification, and be responsible for the daily maintenance and storage of the experimental equipment. When the equipment is damaged, it should be reported in time, and records should be made to prove the reason and identification.

7. The operator is responsible for the management of standard curing room on the construction site, and records the temperature and humidity of standard curing. These records should be hung on the wall for inspection. The environmental sanitation of standard curing room and preparation room should be clean and tidy, and the test blocks and test modules should be packed neatly.

8, the operator is responsible for the slump of commercial concrete approach, temperature detection and block production.

9, the operator should do a good job of winter construction structure entity temperature measurement and atmospheric humidity measurement, and recorded in accordance with the provisions, timely filing.

;