What is the dado line?

The partition line, also known as the convergent strip, is a metal strip that covers the joints with the vertical edge of the back of the furniture veneer and the bark, which mainly plays the role of covering the joints. It is divided into internal angle, external angle, flat strip and other models, with specifications ranging from 10 mm to 100 mm, and the material can be solid wood, imitation wood, PVC or metal.

There are many kinds of siding lines, such as gypsum closing line, wood closing line, stainless steel closing line and so on.

Partition lines are generally used at the junction of different materials, such as wooden floors in bedrooms and tiles in corridors. At the junction of the two materials, it needs to be closed with a partition line; There is also a wall shape, which covers the multi-layer material part on the edge of the modeling after closing the part higher than the wall with the closing line, which plays a beautification role. As far as its specifications are concerned, the lateral line is determined according to the design requirements or the functions adapted to local conditions, and can be commercialized or customized.

Extended data:

Edge closing principle of the closing strip;

1. Right-angle edge sealing: This is the most common edge sealing method, and usually it can achieve good results due to the symmetry of handover.

2. Sharp angle (obtuse angle) edge sealing: In the material conversion with strong contrast in size and strength, in order to avoid stiff handover, such as the handover of panel, switch panel and wall of electric box, if the panel with right angle edge sealing will be stiff, you can choose the panel with oblique edge sealing, and choose it according to the corresponding design style of different designers.

3. Notch trimming: This trimming is also a good choice, because there is still a big gap in the trimming of concave corners, which directly affects the appearance. If there is an asymmetric gap with uneven size between the door cover and the wall due to construction error, putty ash mixed with a high proportion of glue can be used for jointing. Hook uneven cracks into symmetrical and even pits, blur the connection between wall and wood products, just repair, and the effect is not bad.

Of course, the pit edge can also be formed by the designer according to his own style to achieve his own design effect. In fact, no matter what material is converted into, as long as the inner corner is closed, it will not be too ugly. Therefore, when constructing, we only need to find a closed method in the inner corner, which is the direction of thinking. If you can't form an edge in the inner corner, you can try to make the inner corner or even increase it.

Baidu encyclopedia-jiekoutiao