Summary of chemical water treatment in thermal power plant

Summary of Chemical Water Work in Thermal Power Plant 1 Over the past year, as a xxx worker in a power plant, I have worked hard to learn professional and technical knowledge with full enthusiasm, strictly abide by various operating procedures, humbly ask for advice, unite my colleagues, constantly improve my working ability and do my job well. Now I will sum up my work in the past year:

1. I am conscientious and responsible in my work, I love my job, I demand myself with the company philosophy, I treat others with integrity, I do things in a down-to-earth manner, I obey the arrangement of leaders, I overcome my physical discomfort such as pregnancy reaction, and I always treat my work with a positive and serious attitude. Especially in April, when two units were running at the same time, the labor intensity increased, and some online instruments were inaccurate, so it was necessary to rely entirely on manual analysis. For example, according to the normal testing procedure of a unit, it takes two hours to do the testing, during which medicine should be added, water quality should be monitored, equipment should be checked and sewage should be discharged at night. At first, I was too busy to go to the toilet and tried my best to avoid water quality control in time. Later, I actively adjusted my work ideas, grasped the key points, and first did the water quality test with no online instrument and large fluctuation, and then did the stable water quality index test. In this way, although one person has one post, I still insisted on knowing the water quality situation in time and adjusting the water quality better.

Second, study hard technically, memorize the operating rules in theory and buy other chemistry learning materials; In practice, strictly abide by the operating rules, cultivate the ability of independent operation, ensure that no misoperation accidents occur, write down the problems encountered in the work, experience gained and matters needing attention at any time, and humbly ask the master and Commissioner for advice. Although we have been able to work independently, we know that it takes time to hone and accumulate knowledge, and January is better than January. Even during maternity leave, I don't forget to read chemistry books at halftime, so that I can be on duty when I'm not on duty. I also make full use of the network resources at home, check the chemical literature of the power plant, broaden my horizons and continue to charge. I hope I can treat my work with a new understanding after I take up my job.

Third, the ability includes coordination ability and accident handling ability. If "technology" is compared to "intelligence quotient", then "ability" can be compared to "emotional quotient", and so can chemistry major. A high IQ is not necessarily a high EQ, because technology is dead and ability is alive. For example, in July, the dissolved oxygen in the condensate of Unit 2 suddenly increased and there was no chemical operation. I asked the turbine personnel that the upper part of the deaerator did not reach vacuum because of the operation of adjusting the water level, which led to the sudden change of the value, not the deterioration of water quality. Therefore, quick and accurate judgment ability and flexible learning and application can do better.

Fourth, accumulate work experience and implement the company's "energy saving and consumption reduction". On the basis of qualified water quality, excellence and safe operation are the first, and economic operation should also be taken into account. If the boiler water quality of 1 boiler is still unstable in May, it is necessary to actively ask the centralized control room for load changes. When the load is low, try to open a large steam outlet to ensure the steam quality and make the boiler water qualified and stable as soon as possible. However, when the load is high, the exhaust effect is not obvious, which wastes working conditions. Therefore, on the basis of opening Dalian platoon as much as possible, we should try our best to save resources and grasp the balance between the two. In June, low-phosphate treatment was carried out to control the consumption of boiler water, which should not only prevent acid corrosion of boiler, but also prevent long-term artificial salt accumulation and scaling of boiler. In order to achieve the three goals, it is necessary to determine carefully, monitor carefully, worry about equipment and communicate patiently.

Verb (short for verb) suggests:

1. Can the safety facilities be more detailed? Formulate protective measures for equipment misoperation, failure drill plans and acid-base accident rescue plans, nip in the bud, update the traditional concept of chemical supervision, and change passive disposal into active foresight and prevention.

2. To strengthen the automation of microcomputer, it is best to make full use of network resources to make chemical water quality supervision more sensitive and efficient; Improve the automatic operation and maintenance of chemical on-line instruments and meters, and make the chemical test results more scientific and accurate.

At present, we are all talking about environmental awareness. As a thermal power generation enterprise, can we brainstorm, take more water-saving measures, use less or no chemical reagents, and comprehensively implement water recycling? This is just my immature idea. Because personal ability is limited, it needs the professional and technical knowledge of masters and specialists.

Xxx years have come, and the new year has a new beginning and new pressure. Only by setting new reasonable goals can we make new breakthroughs.

1, continue to learn chemical professional technology, improve accident handling ability, and strive for more skilled supervision of soda and water treatment operations.

2. While doing a good job, learn other professional knowledge and strive to realize the company's goal of "all-round training" as soon as possible.

3. Continue to play the spirit of unity and cooperation, strengthen the concept of China Resources, and spur yourself to have a higher understanding and development.

Summary of Chemical Water Work in Thermal Power Plant After joining the work in July of 2 xxxx, with the help of the monitor and teacher, I gradually became familiar with the wiring and operation of high-voltage test, got a certain understanding of the test principle, and initially possessed certain judgment and analysis ability. While learning professional knowledge, actively participate in safety activities in the team, deeply understand the importance of safety production, ensure the safety of field tests, and achieve three no injuries.

Looking back on my work in the past year, I have mainly done the following work:

1, I love my job and actively learn from the teachers in my class.

As a new employee who just joined the work, he deeply felt his lack of professional knowledge and business skills. He needs to consult the master with an open mind, see more, think more, ask more and learn more. For more than a year, I have studied professional books such as Test Method for High Voltage Electrical Equipment, Elementary Work for Electrical Test, Comprehensive Reading of Preventive Test Procedures for Live Working Tools, Devices and Equipment, and I am familiar with the test principle, equipment principle and operating procedures as soon as possible. Ask questions in time if you don't understand anything in your work, and continue to check the information afterwards to get a deeper understanding. After I became familiar with the testing work, I became more and more deeply aware of the importance of high voltage test's work. The safety of most primary equipment in substation needs careful and patient testing to ensure the refinement of test data. I am not afraid of trouble and cautious in testing. I am influenced by the class master at work, so I pay attention to safety in operation. After the test, I checked carefully and couldn't pull a fuse.

2. Follow the team members to participate in the maintenance and testing of several substations in the city.

20xx September autumn inspection, transferred to more than a dozen stations in the city, initially familiar with the trial operation. Participated in substation expansion project, and lived with the team in Zouping town for 20xx years1/kloc-0. With the encouragement of the director, my colleagues and I paid attention to safety and accelerated the progress. 20xx 10, Wudi Ocean stands in a new upper range. The company organized labor competition, and successively completed the handover test of PT, arrester, CVT, circuit breaker-1, circuit breaker-1, CVT and 220KV double-line circuit breaker with the team.

3. While completing my own work, I also actively participated in the work assigned by the team.

20xx 10 Watch the release conference of QC team results, and learn about the production process, topic selection, discussion, organization, cause analysis, etc. Participated in the solicitation of anti-corruption calligraphy art works organized by the head office, and created 5 cartoons, with posters 1 piece. Participate in the safety production cartoon competition organized by the company, and the cartoons will be included in the brochure.

Over the past year, under the correct leadership of the team leader and monitor, although I have done the above work and achieved certain results, as a new employee, there is still a certain gap compared with the requirements of superior leaders and the achievements of other team members. There are mainly the following aspects:

1, my professional level is not high. It is difficult to judge high voltage test's work in the later data analysis, and sometimes I need experience judgment, which is what I lack most. Therefore, I need to learn more in my future work and pay more attention to special failures. In the study class, the master finds problems, analyzes problems and solves them.

2, the role change is not enough, only think that they can complete the experiment, do their job well, lack of organizational and coordination learning. In addition, there is a certain inertia on safety issues, thinking that the person in charge can work boldly and safely after confirmation, and lacks self-protection.

For the above shortcomings, in the 20xx years of work, I want to sum up the experience and lessons, find out the gap and overcome the shortcomings, especially in the work of safety production. I want to keep a clear head in front of my grades and fully realize that unsafe factors may still exist. Only by adhering to the policy of safety first and prevention first and working carefully can we prevent problems before they happen.

Summary of chemical water treatment in thermal power plant. I have been working for more than a year. In this year's work, I seriously study and study technology, and my ability and ideological quality are constantly improved and improved. Under the care of the company and the team, I have changed from a student who has just entered the society to an enterprising power plant operator.

Since the beginning of this year, from my job responsibilities, I am very grateful to the company leaders and team members for their support and help, so that I can practice what I have learned in textbooks and learn what I can't learn in school. These achievements are inseparable from the help of leaders and team members. We will summarize our work in the past year:

First, the work is serious and responsible.

I love my job and respect my job. I demand myself by the company philosophy, be honest with others, do things in a down-to-earth manner, obey the arrangement of the leaders, stick to my post when the team is short of people, work hard, have difficulties in customer service, check carefully, never let go of any tiny equipment defect on site, and notify the team leader as soon as possible when problems are found, thus avoiding major equipment accidents. I always take a positive attitude towards my work, especially during this year's minor repairs, Unit 2 worked at 12 for more than 20 days. Although it was hard work, I learned something that I couldn't learn when normal equipment was running.

Second, study hard technology, study hard theory, and learn the operating rules by heart;

In practice, strictly abide by the operating rules, cultivate the correct operating ability, ensure that no misoperation accidents occur, record the problems encountered in the work, experience gained and matters needing attention at any time, and humbly ask the master for advice. Although I have worked independently, I know that it takes time to hone and accumulate knowledge if I want to learn operational knowledge thoroughly and step by step and make myself stronger day by day. After work, don't forget to use books, internet and other resources to supplement yourself, so as to broaden your horizons, continue to charge and supplement your own shortcomings. At the same time, after the unit entered the winter operation, the company strictly grasped the lack of safety awareness of employees in the winter operation of the unit and organized each team to learn. Through organizing training, I realized my lack of technical knowledge and inspired me to study harder in the future.

Ability includes coordination ability and accident handling ability.

If "technology" is compared to "intelligence quotient", then "ability" is compared to "emotional quotient", and so is operation. A high IQ is not necessarily high, because technology is dead and ability is alive. One year's work experience tells me that only by studying and applying can I do better.

Fourth, accumulate work experience and implement the company's "energy saving and consumption reduction".

On the basis of qualified water quality, excellence and safe operation are the first, and economic operation should also be taken into account. If the water quality of the auxiliary engine is not harmonious, the sewage should be started in time to make the water quality qualified in the shortest time, and the chemical personnel should be contacted in time to check the water quality. Once qualified, the drain valve of auxiliary water tank should be closed quickly, which not only ensures the safe operation of the unit, but also reduces the waste of auxiliary water.

Fifth, I also realized my own shortcomings in one year's work.

For example, lack of on-site equipment operation and technical knowledge, and sometimes lack of safety awareness. In the future study, I will improve my learning enthusiasm and initiative, let myself grow into a qualified inspector as soon as possible, strengthen my study and cognition of the company's safety regulations, and make efforts for the safe operation of the unit.