Personal year-end work summary of aluminum plant employees

Personal year-end work summary of aluminum plant employees

The days are like a fleeting moment. Inadvertently, the work of the year is coming to an end, and the work of the next year will soon begin. I must be very emotional. Well, it’s time to summarize the gains and losses of this year and lay the foundation for the next year’s work. Many people have a headache how to write a wonderful year-end summary. The following is the personal year-end work summary of aluminum factory employees that I have carefully compiled. I hope it can help everyone.

Personal year-end work summary of aluminum plant employees 1

Since personnel stationed in the project in 20xx, they have actively contacted the owners and supervisors to understand the project status. Actual survey site to understand the specific difficulty of construction. Organize personnel to study construction drawings and understand project content and related materials. Prepare construction organization design, excellence planning, equipment and material plan, and actually implement the market price of materials, etc., so as to be well aware of it. Preparatory work has been actively prepared in many aspects to ensure the smooth start of the project. Now I will give a brief report on my current work.

1. Market inquiry for main materials

The main materials (including xxt steel, xxt pipes, electrical and instrument cables, insulation materials) were obtained through inquiries from many local production units. During the inquiry, the total price was higher than the budgeted price (due to recent market price increases). Among them, the larger quantity of xxt pipes has a total budgeted material cost of xx million yuan (including auxiliary materials). The actual price quoted by the manufacturer (excluding auxiliary materials): xx Steel Pipe Factory xxx million yuan; Huantai Dazhong Steel Pipe Factory xx million yuan ; xx steel pipe factory xx million yuan; xx pipe factory xx million yuan. The highest price difference is xx million yuan, and the lowest price difference is xx million yuan. For electrical and instrument cables, the total budgeted material cost is xx million yuan (including auxiliary materials). The actual manufacturer's quotation for inquiry (excluding auxiliary materials): xx cable factory xxx million yuan, xx cable factory xx million yuan, xx cable factory xx million yuan, xx cable factory xx million yuan. The highest price difference is xx million yuan, and the lowest price difference is xx million yuan.

2. Work arrangement of the project

According to the meeting arrangement of xx deputy general manager of xx company, the main part of the steel structure of this project will be installed by the second company. The equipment hoisted along with the main body will be installed by the second company.

For the process pipeline installation branch project, after consultation with the xx manager, the construction team of the xx Aluminum Plant Planning Department (responsible for in-plant project bidding and project settlement) is responsible for on-site installation and construction. The construction team abides by various rules and regulations of the construction site and the project department, obeys the unified command of the project department, and the construction quality meets the design requirements and is recognized by the supervision department and quality objectives. The fee standard shall not exceed the direct cost, and the specific matters are to be determined.

The sub-projects that this project department organizes its own personnel to construct include: equipment part, electrical part and instrument part. The equipment part includes the installation of xx pump bodies, the installation of xx small pressure vessel tanks; and the installation of electrical instrumentation division projects. Aluminum plant employees’ personal year-end work summary 2

During the work in October, the work of the previous month was proposed for correction and certification, and timely corrections were made to the areas that could not be done to improve work efficiency and work quality. The civil construction work of the month has basically entered the final part, mainly focusing on the 3.5-meter platform and brick masonry of the electrolytic workshop. The hoisting of all prefabricated columns in the third and fourth workshops, the hoisting of the first 400 meters of steel roof trusses, the installation of roof panels, and the remaining work of the second phase have been completed. Prefabricated column pouring work and foundation compaction processing part.

In October, the work of this department will be implemented in detail, and the previous working methods will be changed. The expenses incurred by the daily project will be communicated and processed with other relevant departments in a timely manner, and objective and accurate records will be achieved in a timely manner. . In the third electrolytic workshop, the large and small platforms have been completed to the 28th and 17th axes, 600 meters of geo-circle beams and the concrete pouring of the foundation part of a corridor have been completed, 400 meters of 3.5-meter brick masonry work has been completed, and steel roof trusses, inter-column supports, and short columns have been completed. For installation work, complete the hoisting work of all prefabricated columns in the workshop, complete the backfilling work for the deep foundation pit of the second corridor, and overcome the difficult environment caused by groundwater in construction, using well point dewatering method to deal with it. The third workshop strengthened protective measures in the later concrete pouring. The poured platforms and columns had good visual quality. However, during the production of steel roof trusses, the anti-rust paint spraying and rust removal were not in place. The supervision organization and technical personnel were notified in a timely manner to follow up. , issue rectification notices and assessment sheets, and deal with quality hazards in a timely manner.

Under the condition that the temperature meets the requirements, the fourth electrolysis workshop completed the 47-axis line of the 3.5-meter platform and the 800-meter ground ring beam, completed the hoisting of the remaining prefabricated columns, and completed the installation of the first 400 meters of steel roof trusses. The installation of roof panels provides convenience.

The earthwork backfilling work of the 4th corridor and the hoisting work of the wind-resistant columns. Serious cracks occurred during the construction of the large-area platform in the 4th workshop. After analysis by the relevant technical personnel, it is Due to problems caused by the construction technology, we promptly supervised and tracked the installation of 600 square meters of construction panels, and 1,200 square meters have arrived. The remaining work of hoisting will be arranged as soon as possible.

The second phase of precast columns has entered winter construction due to concrete pouring, resulting in later strength failure, resulting in serious delays in hoisting work. However, now that all work has been done, the hoisting task will be arranged immediately when the strength is reached and the hoisting requirements are met. In the dynamic compaction area, because the dynamic compaction team belongs to individuals, the dynamic compaction process cannot be tracked in place. After we found out, we promptly stopped supervision, tracked and rectified the dynamic compaction, and increased the compaction capacity from the original 10 strokes to 11 strokes. The rammed part is reworked and then rammed.

For high-altitude construction work, on-site supervision and management will continue to be strengthened this month. Due to the increasingly cold weather and the employees wearing hemp coats during the finishing period of the project, safety supervision should be strengthened during this period. Its requirements The team leader pays attention to safety details in the process caused by previous construction to prevent the occurrence of safety accidents.

Plan:

1. This monthly plan is to complete the installation of 5,000 square meters of roof panels;

2. The hoisting of prefabricated columns for the second phase of electrolysis;

3. 200 meters of work after the steel roof trusses are hoisted at the end of the first phase. Personal year-end work summary of aluminum plant employees 3

The production process of aluminum products is divided into bauxite mining (Chinalco Group - upstream enterprise), alumina production (my country's main alumina producing areas Distributed in Shandong, Henan, Shanxi, Guangxi, Guizhou and other places), the production of electrolytic aluminum (which requires the consumption of alumina, the production cost is mainly electricity resources and alumina resources, the main production areas are in Xinjiang, Shandong, Henan and other places, among which Xinjiang has developed very rapidly in recent years, mainly The reason is that it has abundant coal resources and low cost of electricity resources for self-built power plants. In the first three quarters of 20xx, Xinjiang’s electrolytic aluminum production increased by 79.9%), and the production of aluminum products (downstream processing enterprises, mainly divided into aluminum plates, aluminum strips, etc. More than 270 products in 12 categories), processing of recycled aluminum (using scrap aluminum products for re-rolling, aluminum products can be recycled multiple times, and the loss rate does not exceed 5%).

All bauxite mining in my country belongs to China Aluminum Corporation. China Aluminum Corporation is also the largest enterprise in producing alumina and electrolytic aluminum in my country. In 20xx, the annual alumina output reached 9 million tons, and electrolytic aluminum production reached 9 million tons. Aluminum production is 3 million tons, and in 20xx it is expected to reach 13 million tons of alumina and 3.21 million tons of electrolytic aluminum.

In addition to Chinalco Group, my country's alumina production is mainly distributed in Shandong, Henan, Guangxi, Shanxi, Guizhou and other provinces and regions. In 20xx, the national alumina production reached 44.5 million tons, ranking first in the world. A major aluminum producer.

my country’s electrolytic aluminum production is mainly distributed in Xinjiang, Henan, Shandong, Guizhou, Gansu, Qinghai, Inner Mongolia and other provinces. In 20xx, Xinjiang’s electrolytic aluminum industry developed rapidly, with a growth rate of 79·9% in the first three quarters. , while mainland electrolytic aluminum production enterprises have been in a downward trend in recent years due to the constraints of power resource costs. The focus of my country's electrolytic aluminum production is gradually shifting to the west. The advantages of electrolytic aluminum production in the west are rich mineral and coal resources, and the cost of power generation of self-built power plants It is low-cost and has a greater price advantage. At present, the output of electrolytic aluminum in southwest China accounts for 65% of the total output of electrolytic aluminum in my country.

The classification of aluminum products mainly includes aluminum plates, aluminum strips, aluminum foil, aluminum profiles, aluminum tubes, aluminum rods, aluminum wires, aluminum ingots, aluminum castings and forgings, aluminum powder, aluminum alloy products and alumina, etc. 12 Major categories, each category is divided into various small categories with different characteristics and application ranges, with more than 270 types. Aluminum product processing companies are generally called downstream companies in the aluminum industry. There are many domestic aluminum product processing companies with various product types and uneven quality.

The recycled aluminum industry is an important pillar of aluminum recycling and remanufacturing. The loss rate of aluminum products is generally very low, no more than 5%. Therefore, the recycling and remanufacturing of scrap aluminum products is an important source of income for aluminum product manufacturers. One, it is also a manifestation of resource recycling.

Individual year-end work summary of aluminum plant employees 4

1. From August xx to March xx, I practiced in the Second Electrolysis Department

During the internship, I was mainly responsible for electrical measurement work. Mainly responsible for: measuring the bath temperature of the electrolyzer, measuring the pressure drop at the furnace bottom, and measuring the anode and cathode current distribution. Among them, the temperature of the electrolytic tank is measured three times a week, the furnace bottom pressure drop is measured once a week, and the anode current distribution is required to be measured in each shift every week. For electrical measurement work, I must ensure that the measurement data is true and accurate, and provide practical and reliable technical parameters as a basis for department production.

At the same time, in order to do a better job in electrical measurement, I carefully studied electrical measurement skills. If I didn’t understand, I asked the department’s regional engineers for advice, and I was able to quickly understand the key points of electrical measurement technology. In the workshop, I often ask workers for details that arise during the measurement process so that I can collect data accurately. During the work process, due to the care and support of the department leaders and my continuous learning and summary, my work has been continuously improved and I have accumulated a lot of valuable experience, which will be of great help to me in my future work.

The internship work in recent months has initially revealed my work level and ability. Not only did I master the electrolysis and electrical measurement technology, but I also initially mastered certain electrolysis knowledge and certain working methods, which made me actively prepare for my normal work in the future.

2. From March XX to the present, working in the 155ka working area of ??the electrolytic plant

Working in the 155ka working area of ??the electrolytic plant, my main job is still electrical measurement work, but I have added my knowledge of electrolysis Worker assessment and safety work in the work area. The electrical measurement work is basically the same as the previous work. It is still the measurement of electrolytic tank temperature, furnace bottom pressure drop, and anode and cathode current distribution. The assessment of electrolyzers is my new job since I took up the job, so I pay special attention to doing this job well and can do it well. I feel unfamiliar and fresh about the safety work in the work area, but I can quickly adapt and do this work well.

First of all, for the electrical measurement work, based on my work accumulation during the internship, I will soon be able to do it with ease, and I can constantly discover new rules in the process, making the work more efficient. Go more smoothly.

Secondly, the assessment of electrolyzers is the most important task to me during my work. Because this job involves the income of electrolyzers, we can't be careless in the slightest. When I first came into contact with this job, I felt that the burden on me suddenly became heavier. I have to check and supervise the daily maintenance work of the electrolyzers on the electrolyzers, and record the maintenance status of the electrolyzers in real time; check and measure the technical parameters of the electrolyzers to reflect the level of technical maintenance of the single cells by the electrolyzers, and record the maintenance status of the electrolyzers in real time. Conduct systematic statistics on relevant data. Finally, we strictly follow the assessment standards set by the work area and conduct detailed assessments of the electrolyzers based on daily inspection statistics.

This job is really simple for me, but it is really difficult to do it fairly. Therefore, I have been actively consulting the leaders of the work area, carefully researching and analyzing the assessment standards issued by the work area, deeply understanding the spirit of the "Standards", and vigorously publicizing and explaining the "Standards" in the workshop, so that everyone can All employees know and understand the assessment methods in the work area. Collecting and consulting the opinions and views of electrolyzers enabled me to make foolproof preparations for the assessment. Finally, the assessment work was successfully completed.

You must take responsibility for safety work, be familiar with the production and equipment conditions of the electrolysis work area, and have a deep understanding of the importance of safety in the electrolysis production process. To this end, I actively learned from many senior safety officers in the electrolysis plant, learned a lot about safety knowledge in the workshop, and actively read and studied safety-related books. On this basis, I was able to quickly adapt and do a good job Work safely.

Three, one year of internship and work, I gained a lot

First of all, I learned how to be a person and how to do things. I understand that a down-to-earth, sincere, serious and responsible attitude is the prerequisite for doing everything well. At work, you can learn from others humbly, treat everyone sincerely, and accept guidance with an open mind. Constantly facing setbacks and failures, but able to solve and resolve them well. Constantly summarizing and accumulating methods of doing things have enabled me to continuously enrich and develop myself.

Secondly, I absorbed a lot of fresh knowledge, which brought my theoretical knowledge to a new level.

Continuous learning and enrichment is an indispensable part of my work and life. I give full play to my learning ability and actively acquire many things that I have never found in books, so that I am constantly enriched and satisfied.

Finally, I continue to grow at work, growing from a college student who just left school to a qualified employee of an aluminum factory. In work and life, I often encounter a lot of setbacks and helplessness, which sharpens my will and urges me to continue to grow. When I learn to solve a large number of problems, I feel that I have really grown up. In the process of continuous accumulation and summary, I will be able to do things with ease, and I will continue to develop and advance.

4. There are many deficiencies and flaws in my work

First of all, compared to many experienced comrades, I often make some common sense mistakes in my work, but I can always make mistakes. Timely discovery and resolution.

Secondly, although I think that I have strong work ability and can be recognized by my leaders and colleagues, I lack decisiveness in some important matters. I often look forward and backward when things come, and I am not good at doing them. I make quick decisions, so I often feel that I cannot do my best in doing things. This aspect needs to be changed and improved in my future work.

Regarding these shortcomings and flaws that have appeared in my work, I will gradually make up for and improve them in future work, and actively discover and solve new problems, so that my work level will continue to develop and improve. .

In short, work makes me constantly enriched and makes me continue to develop myself, and I believe that I am qualified for the job and have the ability to do every job in the future;