Surveyor application requirements and examination time

Application requirements (one of the following conditions must be met)

1. Assistant engineering surveying engineer

1. Students with a bachelor's degree or above or equivalent;

< p>2. Fresh graduates with a college degree or equivalent and relevant practical experience;

2. Engineering surveying engineers

1. Those who have passed the assistant engineering surveying engineer qualification certification;

2. Fresh graduates with a master's degree or above or equivalent;

3. Those with a bachelor's degree or above or equivalent and have been engaged in relevant work for more than one year;

4. Those with a college degree or equivalent and have been engaged in relevant work for more than two years.

3. Senior engineering measurement engineer

1. Those who have passed the engineering measurement engineer qualification certification;

2. Graduate degree or above or equivalent and engaged in related work Those with more than 2 years of experience;

3. Those with a bachelor’s degree or above or equivalent education and have been engaged in relevant work for more than two years;

4. Those with college degree or above or equivalent education and have been engaged in relevant work for more than three years.

The unified examination is held four times a year, in April, June, October and December. The specific date, location, and method of the examination will be notified separately by the examination institution or training institution where the candidate is located. Extended information

Examination time:

The unified examination is conducted four times a year, in April, June, October and December. The specific date, location, and method of the examination will be notified separately by the examination institution or training institution where the candidate is located.

Charging standards:

1. Assistant engineering surveying engineer: registration fee is 10 yuan, certification fee is 130 yuan, examination fee is 200 yuan, and training fee is 1,280 yuan. The total is 1620 yuan.

2. Engineering surveying engineer: registration fee is 10 yuan, certification fee is 160 yuan, examination fee is 240 yuan, thesis review fee is 200 yuan, and training fee is 1,580 yuan. The total is 2190 yuan.

3. Senior engineering surveying engineer: registration fee is 10 yuan, certification fee is 260 yuan, examination fee is 400 yuan, thesis guidance and defense fee is 700 yuan, and training fee is 1,980 yuan. The total is 3350 yuan.

The job responsibilities are as follows:

1. Implement construction measurement procedures, specifications, and standards, and be responsible for handover piles and construction retesting, setting out, construction process control measurement, Monitor measurement and data analysis, use monitoring data to guide construction and completion measurement work.

2. The preparation of engineering measurement plan and monitoring measurement plan shall be submitted after approval by the chief engineer.

3. Responsible for the management of measuring instruments in the project department, and establishing measuring instrument ledgers and maintenance ledgers. (Should include certificates of conformity, equipment instruction manuals, accessories manuals, calibration records, appraisal certificates, maintenance records, etc.).

4. According to relevant national regulations, regular inspections, periodic re-inspections, no calibration, and careful maintenance should be carried out. To maintain the accuracy of the measuring equipment.

5. Carry out technical training for surveying personnel in a planned and step-by-step manner according to the technical process of the project. To enable them to master measurement knowledge, measurement specifications, and the use of measuring instruments.

6. Check the design drawings before starting work, discover problems in time and report them. Only after confirmation can the measurement and setting-out work be carried out. All centerline and horizontal measurements must be calculated and documented in detail.

7. Strictly implement the double inspection system for measurement work. Double inspection, that is, recheck measurement, must be carried out for all re-testing of pile connection, construction setting-out inspection and completion measurement. One measurement group uses different methods to measure and check the results one after another, or two measurement groups measure and check the results separately.

8. Responsible for project monitoring and measurement work, monitoring data statistics, summary, analysis and reporting. Make the data true and accurate, and use monitoring data to guide construction.

9. Responsible for filling in, reporting and organizing various measurement data.

10. Other tasks assigned by the leader.

Baidu Encyclopedia-Engineering Measurement Engineer