Equipment handling contract

Six model clauses of equipment handling contract

With the establishment of people's legal awareness, contracts may be used at any time, at any place and in various scenarios. Signing a contract can encourage both parties to promise and perform cooperation in a standardized way. So how to draw up a contract? I think this makes everyone very unhappy. The following are six equipment handling contracts that I have compiled for you. Welcome to read the collection.

Equipment handling contract 1 party a:

Party B:

Through negotiation between both parties, Zhejiang Aiying Doctor Technology Co., Ltd. (hereinafter referred to as Party A) contracted the company's cargo handling work to Party B, and signed the following agreement on the basis of equality and voluntariness.

I. Scope of Contract and Work Contents

Loading and unloading of production equipment, raw materials and finished products required by the company's production and operation.

Two. The term of this contract is from to.

Third, the contract fee and payment method

Party B shall pay Party A the contract security deposit of RMB ten thousand Yuan only (10000.00 Yuan). Party B's salary shall be settled by piece rate. See the annex to this contract for details. Wages shall be paid to Party B's employees on the payday of Party A's employees.

Four. Rights and obligations of both parties

1. Party A must pay the contract fee to Party B as agreed.

2. Party B must obey the management of the warehouse keeper and the management personnel of the production department.

3. Party A must notify Party B by telephone or in writing half an hour in advance, and issue a handling instruction. If Party B's response time exceeds 1 hour, Party B shall bear all losses caused by Party A's untimely handling. The loss amount will be deducted from the total contract amount of the month.

4. Party B is responsible for recruiting porters, but the personnel recruited must meet the requirements of Party A..

The employment standards of the company and the labor problems of Party B's employees shall be solved by Party B. All personnel of Party B must abide by the management system of Party A, and if they violate it, they will be punished according to the regulations of the company.

5. Party B must handle it in a safe and civilized way. If the goods are damaged due to Party B's artificial reasons, Party B shall make full compensation. Do a good job in ideological education and safety training for employees. Party B must pay attention to safety in the process of working in the factory, and Party B shall take full responsibility for safety accidents outside the factory.

Verb (short for verb) others

1. Party B's employees are not entitled to other welfare benefits (including overtime pay and attendance bonus on legal holidays). ).

2. In the process of loading and unloading, customers shall not be charged all fees (if it is found that customers collect cash and materials, they will be fined 1000 yuan each time).

3. If there are any matters not covered in this contract in actual work, both parties shall settle them through consultation and make supplementary provisions, which have the same effect as this contract.

4. The annexes to this contract are an integral part of this contract and have the same legal effect as this contract.

5. This contract shall come into effect as of the date of signing. Both parties should abide by it together. In case of breach of contract, Party B will pay one month's contract fee as liquidated damages. This contract is made in duplicate, one for each party.

Party A: Zhejiang Party B:

Authorized Agent: Authorized Agent: Tel: Tel:

Year, month, sun, moon, sun.

Article 2 of the Equipment Handling Contract: Handler (Party A): _ _ _ _ _ _ _ _

Address: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Contact person: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Tel: _ _ _ _ _ _ _ _ _ _ _ _

Handling Company (Party B): _ _ _ _ _ _

Address: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Contact person: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Tel: _ _ _ _ _ _ _ _ _ _ _ _

Party A and Party B reach an agreement through consultation, and hereby conclude this contract for both parties to abide by.

I. Name of the goods: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.

(Both parties may indicate the quantity and value of the goods in the list of goods, which is an annex to this contract and has the same legal effect as this contract. )

2. The place where the goods are moved out: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.

3. Location of goods movement: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.

4. Vehicle type: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.

5. Scheduled loading and unloading date of goods: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.

Requirements for packaging intransitive verbs: Party A shall carry out standard packaging according to Party B's requirements. It can also be packed by Party B, but the goods should be inspected before packing to ensure the transportation safety.

Seven. Party B's responsibilities

Party B guarantees that the goods will be delivered to the designated place safely within the time limit stipulated in the contract. Be responsible for the safety of the goods carried, and ensure that there is no shortage, damage or artificial deterioration. In case of loss, shortage, deterioration or damage, etc. In principle, compensation shall be made according to the market price at the place of arrival for the loss of goods during loading, unloading and transportation. Unless otherwise agreed, compensation shall be paid according to the agreed limit. However, if the loss and damage of the goods are caused by force majeure, reasonable losses determined by the nature of the goods themselves or the fault of Party A, Party B shall not be liable for compensation.

Eight. Party B shall be responsible for general cargo insurance and Party A shall be responsible for valuable cargo insurance .. Party A shall timely check and accept the delivered goods, and pay storage fees to Party A if it fails to receive the goods within the time limit.

Nine, the total cost of packaging and transportation: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.

X. Method of settlement: Party A has paid the down payment of _ _ _ _ _ _. The balance of _ _ _ _ _ _ shall be paid in one lump sum after the goods have passed the acceptance inspection.

XI。 Party A's liability for breach of contract: After Party B delivers the goods as required, if Party A fails to pay the transportation fee and storage fee in full, Party B has the lien on the goods.

12. Any dispute arising from or related to this contract shall be settled by both parties through consultation; If negotiation fails, it shall be settled in the following _ _ _ _ _ _ way:

1. Submit to the Arbitration Commission for arbitration;

2. Bring a lawsuit to the people's court according to law.

Thirteen. This contract shall be terminated upon the completion of performance by both parties. Matters not covered shall be settled by both parties through consultation.

Party A (signature): _ _ _ _ _ _

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Signing place: _ _ _ _ _ _ _ _ _

Party B (Seal): _ _ _ _ _ _

Person in charge (signature): _ _ _ _ _ _

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Signing place: _ _ _ _ _ _ _ _ _

Part III of Equipment Handling Contract Party A (Buyer):

Party B (supplier):

Party A and Party B have reached an agreement on the procurement and installation of this project through friendly negotiation in accordance with the Building Law of People's Republic of China (PRC) and relevant laws and regulations, in line with the principles of equality, voluntariness, fairness and honesty.

Article 1 General situation of the project

Project name:

Project location:

Contract content:

Article 2 Documents constituting a contract

1, this contract and its terms

2, the bid-winning notice

3, the book of tender and its attachments

4, the tender documents

5, national regulations, norms, industry standards and related technical documents

6. Written agreements or documents such as negotiation and meeting minutes on supply issues between both parties shall be regarded as an integral part of this contract.

Article 3 Scope and Conditions of Contract

The scope and conditions of this contract shall be consistent with the provisions of the above contract documents, and the delivery method shall be turnkey project.

Article 4 Contract Price

Party A orders (including transportation) RMB Yuan from Party B and installs RMB Yuan, totaling RMB Yuan, in words. Product name, specification, quantity, unit price, manufacturer, technical specifications and functions, list of spare parts, wearing parts, imported and domestic parts, maintenance plan, quotation of wearing parts in five to ten years, etc. See the attached table for details.

Article 5 Party B shall deliver the goods to Party A on time, carry out the construction and completion as agreed in the contract, bear the equipment quality problems, and undertake the project quality warranty responsibility within the quality warranty period.

Article 6 Party A promises to Party B to pay the contract price within the time limit and in the way agreed in the contract.

Article 7 the contract comes into effect

Time: Year Month Day

Contract signing place:

This contract shall come into effect after being signed and sealed by both parties.

Article 8 number of contract copies

This contract is made in duplicate, one for each party. Both parties agree to make the contract in quadruplicate, with each party holding two copies.

Party A: (official seal) Party B: (official seal)

Legal representative:

Date of signing: Date of signing:

Place of signing Article 4 of the equipment handling contract:

Signature time:

Party A:

Party B:

In order to use the equipment handling fee reasonably and complete the equipment handling work safely and smoothly, Party A and Party B have reached the following agreement through careful negotiation.

First of all, the goal

Party A agrees in principle to "gravure press production line equipment (transportation)"

Second, the handling place and time requirements

After receiving the notice from Party A, Party B shall enter the site designated by Party A within days, and all the equipment handling work shall be undertaken by Party B after Party B's forklift truck enters the site (Party A may provide personnel assistance according to Party B's requirements).

Third, deal with

Before handling, Party A and Party B shall jointly check whether the equipment is damaged. Party B must choose a suitable forklift for handling, and carry it in place according to the location designated by Party A, so as to ensure the safety of the equipment during handling. If the equipment is damaged, other articles of our company are damaged and personal injury is caused by Party B during handling, Party A shall estimate the actual loss and Party B shall compensate. In the process of handling, if personal injury is caused to Party B's personnel due to Party B's responsibility, all losses shall be borne by Party B. ..

Four. Acceptance of equipment in good condition), and handed over to Party B for relocation.

After Party B carries it to the designated place as required by Party A, the equipment department of Party A will check the integrity of the equipment and sign the "Equipment Integrity Acceptance Sheet" for confirmation.

Verb (abbreviation of verb) acceptance requirements

Whether the appearance of the equipment is the same as before handling, and whether there are damaged parts caused by impact, etc.

Terms of payment for intransitive verbs

After Party B moves to the designated place according to Party A's requirements, and the equipment is in good condition after Party A's acceptance, Party B will move to the designated place and pay the full amount after receiving the official invoice.

7. In case of any dispute arising from this contract, both parties shall settle it through negotiation. If negotiation fails, relevant laws and regulations shall prevail.

Eight. This contract is made in duplicate, one for each party, with the same legal effect.

Nine. This contract shall come into effect after being signed and sealed by both parties.

Party A:

Date, year and month

Party B:

Date, year and month

Article 5 of the equipment handling contract: Party A: _ _ _ _ _ _ _ _

Party B: _ _ _ _ _ _

In order to use the equipment handling fee reasonably and complete the equipment handling work safely and smoothly, Party A and Party B have reached the following agreement through careful negotiation.

1. Party A agrees in principle to deliver the finished product warehouse, drying drum, batching device, powder tank and other equipment (totally _ _ _ _ _ _ _ _) to Party B for transportation. After Party B receives the notice from Party A, the vehicles to be hoisted and transported shall enter the place designated by Party A within 3 days, and all equipment shall be hoisted and unloaded by Party B after Party B's crane enters the site.

2. Party A intends to package the use fees of cranes and transport vehicles for the above equipment to Party B in one lump sum.

3. In order to urge Party B to actively cooperate and pull the equipment away from the construction site as soon as possible, both parties agree that Party A will pay Party B a certain coordination fee, and no matter how difficult Party B encounters and how long it lasts, Party B must try its best to load the equipment as soon as possible and transport the goods it carries out of the dismantling site. Based on the above additional responsibilities undertaken by Party B, Party A pays Party B the coordination fee, totaling _ _ _ _ _ _ _ _ (in words: _ _ _ _ _ _ _). This fee is guaranteed by Party B. ..

4. Party B shall ensure that the goods are transported to Party A's unloading site within _ _ _ _ _ _ days after being loaded and transported out of the dismantling site. Due to unexpected factors such as climate, it may be postponed as appropriate.

5. The capital contribution of Party A is RMB _ _ _ _ _ _ _ _ _ _.

6. Party A shall not bear the accommodation fee of Party B's driver and the maintenance fee of Party B's vehicle.

7. Party A provides the loading list, and Party B pulls the goods according to the loading list. Party B must select suitable cranes, trolleys and trucks, and transport them according to the route designated by Party A, so as to ensure the safety of the equipment during hoisting, unloading and transportation. If Party B fails to follow the route and speed specified by Party A and causes equipment damage, Party A shall estimate the actual damage and Party B shall make compensation.

8. Expenses and payment of cranes, trolleys and trucks (1) The total personnel and transportation expenses borne by Party B are _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.

(2) Payment method: After all trucks and trucks of Party B enter the site, Party A will pay RMB _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

(3) Other notes: After Party B pulls Party A's equipment to the destination and unloads it safely, the receiving personnel of Party A will issue the certificate of transportation completion as the basis for final settlement.

9. For matters not covered in this agreement, Party A and Party B shall negotiate a supplementary agreement separately. The supplementary agreement has the same effect as this agreement.

10. This agreement is made in quadruplicate, with each party holding two copies. It will take effect automatically from the date of signature and seal by both parties, and the contract will become invalid after payment.

Party A (seal): _ _ _ _ _ _ _ _ _ _ _

Legal representative (signature): _ _ _ _ _

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Signing place: _ _ _ _ _ _ _ _ _ _ _ _ _

Party B (seal): _ _ _ _ _ _ _ _ _ _ _

Legal representative (signature): _ _ _ _ _

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Signing place: _ _ _ _ _ _ _ _ _ _ _ _ _

Article 6 of the Equipment Handling Contract Party A: _ _ _ _ _ _ _ _ _

Party B: _ _ _ _ _ _

Through consultation, both parties have reached the following terms, which shall be abided by jointly.

1. Party B undertakes the following projects:

1. Equipment will be transported to the new school: _ _ _ _ _ _ _ Yuan/Taiwan, _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ The cost of moving other things is _ _ _ _ _ _ _ _ yuan (including exchange and handling, the remaining _ _ _ _ _ _ _ computers, and the remaining desks and chairs are moved to the main control room, etc.). ). The total is _ _ _ _ _ _ _ yuan.

2. Computer assembly and disassembly: _ _ _ _ _ _ Yuan/set, _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.

3. Network connection: the computer room already has a network cable, so don't buy a network cable. But the network cable is not connected. The output of network cable is _ _ _ _ _ _ _ Yuan/node, which is _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _. Installation of podium, switch, hub, cabinet, broadband incoming line installation, system debugging, etc. _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _. All the clues are concentrated on the podium. To use the dual-network isolation scheme, you need to purchase a network card, RMB _ _ _ _ _ _ _. Replace the _ _ _ _ _ _ root network cable. The original network cable is not long enough, and it will cost _ _ _ _ _ _ _. Total _ _ _ _ _ _ _ yuan

4. Power cord and installation: Two computer rooms in the new area are useless, and one power cord is not installed. Need to assemble _ _ _ _ _ _ _ root wire and _ _ _ _ _ _ _ sockets. _ _ _ _ _ _ _ _ _ Yuan/piece, of which _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ The total is _ _ _ _ _ _ _ yuan.

Second, other projects:

1. The podium was installed in the multimedia classroom on the first floor of the new area, so the multimedia system could not move and translate directly, so it had to be disassembled and reassembled. Including the demolition of the original podium floor (_ _ _ _ _ _ _ _ Yuan, the original floor is a whole board of 5m× 2m), the demolition of the multimedia system (_ _ _ _ _ _ _), the assembly of the podium floor (assisted by the carpenters who make the floor) and the reassembly of the multimedia system (_ _ _ _ _ _ _ _). The total cost is _ _ _ _ _ _ _ yuan.

2. Repair the power cord of _ _ _ _ _ _ _ computer room and replace a set of lines. The salary is _ _ _ _ _ _.

3, computer (school computer) keyboard replacement 1, _ _ _ _ _ _ yuan.

Three. Other terms:

1, material quality, installation quality, must meet the requirements of the items in the table, network 100m to the desktop. The project has been added and will be negotiated separately.

2. The construction period is _ _ _ _ _ _ _ days, and the overdue penalty is calculated at _ _ _ _ _ _ _ yuan/day.

3. After completion, Party A shall organize personnel to check and accept, and pay after passing the inspection.

4. This contract is made in duplicate, two for Party A and one for Party B/kloc-0. ..

5. Date of signing this contract: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.

Party A (seal): _ _ _ _ Party B (seal): _ _ _ _ _ _

Legal representative (signature): _ _ _ _ _ Legal representative (signature): _ _ _ _ _

Bank of deposit: _ _ _ _ _ Bank of deposit: _ _ _ _ _ _

Account number: _ _ _ _ _ Account number: _ _ _ _ _ _

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _