What are the safety operation procedures used by locksmith in this position?

1, use files, scrapers, chisels, flat shovels and other tools, not too hard. Chisels and flat shovels are not allowed to be used, because there are edges and cracks, and the oil on them should be removed in time.

2, when using a hammer, sledgehammer, gloves are not allowed, hammer handle, hammer head can not have oil pollution. No one is allowed to turn around when hitting a sledgehammer.

3. When using a hacksaw, the workpiece should be firmly clamped and the force should be even. When the workpiece will be sawed off, hold it by hand or bracket.

4. When using adjustable wrench, the wrench size should be consistent with the nut size, and no casing should be added to the handle. A dead wrench should be used for aerial work, and the operator should fasten his seat belt. If you use a wrench, tie it with a rope.

5. Use a vise. The vice handle shall not be used for casing reinforcement or hammering, and the clamped workpiece shall not exceed two-thirds of the maximum stroke of the jaw.

6. Dig and shovel objects on both sides of the same workbench, with a protective net in the middle, a single-sided workbench, and one side against the wall.

7, check the inside of the equipment, to use safety line lamp or flashlight, no open flame. For top-heavy, easy-to-dump equipment, it must be padded and supported.

Extended data:

Precautions for locksmiths:

1. Generally, bench press must be close to the wall, and people should stand aside to work. No one is allowed to stand opposite. If there is someone on the opposite side, the bench press must be provided with a safety net with appropriate density, and the bench press must be installed firmly, and no anvil is allowed.

2. The lighting voltage used on the workbench should not exceed 36V.

3. The sundries on the workbench should be cleaned up in time, and the tools and workpieces should be placed in the designated places.

Baidu encyclopedia-locksmith maintenance (assembly) safety operation procedures