What do the blanking workers in the shoe factory do?

The material cutter in the shoe factory is an important member of the shoe factory, which is directly related to the quality of input and output. Due to the different operation modes and scales of shoe factories, the work contents and functions of material cutters are also slightly different. The job content and functional requirements of the cutter in the shoe factory are as follows:

1. The material cutter in the shoe factory is responsible for all material preparation before production according to the production instruction.

2. The material cutter in the shoe factory operates according to the standard of each working procedure, independently inspects it, and immediately reflects the abnormal situation.

3. The collaboration team leader is responsible for supervising the operation and maintenance of the equipment, and checking the quality of each process, personnel deployment and abnormal situation.

4. Cooperate with the team leader to supervise the implementation of process operation, quality improvement operation and control the work progress.

5. The driller is responsible for marking and warehousing semi-finished products and other materials, operation requirements and standards. ：

6. Before cutting, you must check the related matters of the die, sample and production list.

7. Before cutting, check whether the leather is consistent with the correct sample color card. So as not to waste the wrong material!

8, typesetting First, according to the requirements of the size, shape and cortex of the knife mold, the knife mold is placed reasonably, so as to achieve the principle of opening long before opening short, opening large before opening small, reasonably matching the size, and putting the appropriate skin in a position suitable for it to improve the utilization rate of the skin.

10. The lines and colors on the cut leather surface should match each other, and there should be no obvious root lines, flower marks and Chacon, and there should be no wrinkles and fading on the leather surface, nail marks, knife marks and other flower marks to ensure the quality of leather.

1 1. The cutting texture is correct, and there are no cracks, burnt flowers, root marks, scars, loose lines, tendons and spots on the leather. The grain color should be consistent, and it should be matched and fed to the workshop. If there are any quality problems, you must ask the production manager before you can start cutting.

12, the front and back sides of the lining are clearly distinguished, and there is no sand, broken skin and reversed texture.

13, pull-back glue, miscellaneous glue, fabric, main material and other specifications meet the production requirements, and the grain specifications meet the paper grid requirements.

14. All parts should be accurately positioned and cut according to the paper grid, and the cutting materials should be straight without burrs or unevenness.

15, the shovel thickness specification should meet the requirements.

16, the skinning must be carried out according to the paper grid, and the skinning should be carried out as required. The width and thickness of shovel skin should be determined according to whether the position of shovel skin is folded or overlapped, and the width cannot be unified.

17. When stacking materials, open the color matching, and indicate the number and quantity of colors on the list: at the same time, pay attention to whether there is color staining or fading, and different colors must be placed in categories.

.