What is a production management engineer?

Question 1: Is the production manager an engineer? The production manager should be called the production engineer. Different companies have different names and different job contents, but the core of the job contents will not change. According to my understanding, the work content may be on-site management, product quality control of production line (discovery, solution and feedback of quality problems in production process), cycle time balance of production line and maintenance of some production equipment, etc.

Question 2: What does a production management engineer do? Defining the development orientation is to do these tasks; As for development, it depends on personal situation and enterprise situation, and it is not easy to judge. If you do well, you can be a workshop owner, production manager and so on.

Question 3: What is a production technical engineer and what does he do? Production technical engineers are technicians who provide support and services for technical and technological problems in the whole production process.

The main responsibilities are as follows:

1. To undertake technical services on the manufacturing site.

2. Be responsible for the process guidance, management, supervision and technical service of the manufacturing production site.

3. To undertake the programming of manufacturing numerical control equipment and the preparation of work instructions.

4. Responsible for the design, improvement, registration and warehousing of all manufacturing tools, as well as the backup of technical documents.

5. Be responsible for the preparation of NC equipment processing tools, including selection, receiving, sharpening, tool testing and monitoring.

6. Identify the process route changes in the production process.

7. Conduct on-site review on the recovery of nonconforming products in the production process of the branch factory.

8. Review and determine the technical route of new product development.

9. Be responsible for the quality statistics, report and analysis of the branch factory.

10. Complete other work arranged by the branch leaders.

Question 4: What is a production manager? The national professional qualification certification for production management personnel is the general name of the qualification certification system for production management professionals implemented nationwide in Ministry of Human Resources and Social Security. The experiment began in 2006. It is divided into three levels: deputy production manager, production manager and senior production manager, and each professional level is awarded a different certificate. Application conditions for assessment of production and operation managers (for Trial Implementation)-Assistant production and operation managers (with one of the following conditions) (1) have a high school education or equivalent, have been engaged in this profession for more than 5 years continuously, have reached the required standard hours after formal training in this profession, and have obtained a certificate of conformity. (2) Have a college degree or above in related major or equivalent, have reached the required standard hours after formal training in this occupation, and have obtained a certificate of qualification. —— The production and operation manager (who meets one of the following conditions) (1) has obtained the third-level qualification certificate of this profession, has been engaged in this profession for more than 3 years continuously, and has obtained the qualification certificate after the formal training of this profession reaches the required standard hours. (2) Have a college degree or equivalent, have been engaged in this occupation for more than 4 years, have reached the required standard hours after formal training in this occupation, and have obtained a certificate of qualification. (3) have a bachelor's degree or equivalent, have reached the required standard hours after formal training in this occupation, and have obtained a certificate of qualification. —— Senior production and operation manager (meeting one of the following conditions) (1) has obtained the second-class qualification certificate of this major, has been engaged in this major for more than 3 years continuously, has reached the required standard hours after formal training of this major, and has obtained the qualification certificate. (2) Have a college degree or equivalent, have been engaged in this occupation for more than 8 years, have reached the required standard hours after formal training in this occupation, and have obtained a certificate of qualification. (3) have a bachelor's degree or equivalent, have been engaged in this profession for more than 4 years, have reached the required standard hours after formal training in this profession, and have obtained a certificate of qualification. (4) Have a master's degree in related majors, have reached the required standard hours after formal training in this occupation, and have obtained a certificate of conformity. (5) Have a doctorate in related fields. The>& gt Education Exhibition mainly recommends the 20 12 Grade II Registered Structural Engineer Admission Form.

20 12 summary of the entrance examination for first-level registered structural engineers >> Other concerns: 20 12 summary of real questions for first-level registered structural engineers | 20 12 summary of real questions for second-level registered structural engineers >> Online model examination: first-level basic examination | professional examination.

Question 5: What exactly do the production management engineers in the mobile phone manufacturing department do? Generally, the companies that recruit this position are mostly foreign-funded or students with more formal management and more attention to production details.

Generally speaking, production management engineers will be assigned to the engineering department or the technical department to be responsible for collaborative production.

Technical transformation and process design work, including:

1, responsible for establishing and perfecting standardized technical regulations.

2. Be responsible for ECN tracking and accident material identification.

3, reasonable preparation of technical documents, improve and standardize the process.

4, timely guidance, processing, coordination and solve technical problems in the production line, to ensure the normal production.

Go on.

5. Be responsible for the training of technicians and employees.

6. Be responsible for tracking and reviewing the trial production of new products. Make effective and detailed improvement plans and preventive measures for abnormal production.

Measures, and notify other departments. be a matter of record

After that, the implementation results of the project are tracked, and the tracking process is recorded in the project, including the improvement of process status and defect rate.

Conditions. Through the collection and analysis of relevant data, the qualified rate of products is continuously improved.

7, cost rationalization production, production standard working hours, cost reduction plan, process balance, homework research.

Look into it. Operation mode and production specification.

I hope it is useful to you, and I wish you success!

Question 6: What are the specific responsibilities of quality management engineers in production enterprises? Duty is to serve the purpose.

Production enterprises need to provide customers with products that meet the delivery date, reasonable price and meet the requirements.

Meeting customer requirements is an important responsibility of the quality department.

If the product meets the customer's requirements, it is only a system, which requires the concerted efforts of marketing, technology, procurement, production, warehouse and quality system, that is, to establish a quality assurance system (the responsibility of quality engineers).

No matter what quality system, the core is prevention, process control and continuous improvement.

Prevention means no problem, quality planning.

Process control is to find and solve problems in time. quality assurance

Continuous improvement, investigate the cause of the problem and take measures to prevent recurrence. quality improvement

Control from the process route

Need to control from the source, supplier selection management, factory inspection to ensure that non-conforming products are not used.

According to the work instruction, produce qualified products, and carry out the first inspection, self-inspection, patrol inspection and final inspection. Every working procedure does not produce unqualified products.

Factory inspection to ensure that unqualified products do not leave the factory.

This is a quality factor that needs to be guaranteed in product production.

Product development also needs to ensure various factors, that is, commercialization, and pay attention to every key process of new products from design to technology to trial production.

Migration management, do a good job of prevention.

Finally, customer complaints, satisfactory solution of customer complaints, cause analysis, countermeasure formulation and effect confirmation.

Question 7: What do engineers do? What are the classifications? What does it take to be an engineer? Engineer (engineer)

As the name implies, it refers to personnel who have the ability to operate, design, manage and evaluate engineering systems. Engineer is actually a kind of professional level evaluation (title evaluation). Under it, there are technicians, assistant engineers and other titles; With the title of senior engineer and expert. Of course, this is only a calibration of the technical level of personnel engaged in engineering construction or management.

The title of engineer is usually only used for those who have a degree or equivalent work experience in an engineering field.

In some countries in continental Europe, the use of engineer titles is restricted by law and must be used by people with degrees, while it is illegal for others without degrees to use them. Similar laws exist in most states in the United States and some provinces in Canada. Usually, you can only be called an engineer if you pass the professional engineering examination, and the scope of application of the law will generally be enforced only if you deliberately falsify.

The term "technologist" is sometimes synonymous with "engineer" and consists of "technologist" and "suffix scientist", meaning a person who studies technology. This name is generally used in some countries in continental Europe that regulate the use of engineers' names because there is no legal provision. In some Latin countries, technician is just a professional qualification between engineer and technician.

Scientists explore the world to discover universal laws, while engineers use universal laws to design practical objects.

In the United States, the word engineer is also used to refer to people who operate mechanical engines. For example, railway engineers refer to train drivers, ship engineers refer to engineers, and fixed engine mechanics are usually responsible for fixing engines.

Because there are many kinds of engineering projects, there are naturally many kinds of engineers, such as network engineers, electrical engineers, sales engineers and so on.

At present, there are many ways to certify engineers, and examination is the most common way to identify engineers.

For example, the certification examination for engineers in the information industry is popular and contains a high amount of gold-the national technical qualification (level) examination for computer technology and software, commonly known as soft examination.

With the accelerated development of national science and technology and high-tech industry standardization. The gap of engineers is still very large, and a large number of jobs need to bring the breath of spring to such a fierce employment environment. Work hard and hope your dreams come true.

According to the professional title (qualification), it is divided into: professor-level senior engineer (full-time college), researcher-level senior engineer (full-time college), senior engineer (deputy college), engineer (secondary vocational college) and assistant engineer (new job).

Engineers usually refer to middle-level engineers, and the titles of engineers are evaluated by higher authorities, which are common throughout the country. Among them, we should take the intermediate English title exam and the applied computer exam.

Evaluation principle of intermediate engineer

The basic requirements stipulated in the Regulations on the Trial Implementation of the Positions of Engineering and Technical Personnel:

As an engineer, you should meet the following conditions:

1, which meets one of the following departmental conditions

(1) production and technical management department

Master the methods of modern production management and technical management, and have the ability to solve complex technical problems independently.

(2) be able to flexibly use the basic theoretical knowledge and professional technical knowledge of this major, and be familiar with the current situation and development trend of this major at home and abroad.

(3) Have some practical experience in production technology management, and obtain practical technical achievements and economic benefits.

(4) To guide the work and study of assistant engineers.

(2) research and design department

(1) has the ability to independently undertake the research and design of complex projects, and can solve complex technical problems within the scope of this major.

(2) master the basic theoretical knowledge and professional technical knowledge of this major systematically, and be familiar with the current situation and development trend of this major at home and abroad.

(3) Have some practical experience in engineering technology research and design, be able to absorb and adopt advanced technologies at home and abroad, and have made certain achievements in improving the research and design level and economic benefits.

(4) To guide the work and study of assistant engineers.

2. After obtaining a doctorate, pass the inspection; Get a master's degree or a second bachelor's degree and have worked as an assistant engineer for about two years; Obtained a bachelor's degree or graduated from a university, and worked as an assistant engineer for more than four years; Graduated from university and worked as an assistant engineer for more than four years.

If the above conditions are met, the employer >>

Question 8: How to distinguish between managers and technicians? What exactly does it include? 1, manager

Enterprises can be divided into workers, engineers and technicians, managers, service personnel and other personnel according to the grouping of labor posts.

Managers refer to the factory directors and managers of enterprises and the personnel engaged in administrative, production, economic management and political work in various functional institutions and workshops.

2, professional and technical personnel

Professional and technical personnel refer to personnel engaged in professional and technical work and personnel engaged in professional and technical management who have been evaluated and hired by technical posts (titles).

Professional and technical personnel are divided into professional and technical personnel and professional and technical managers.

Economic, accounting, statistics and engineering and technical personnel, political workers, scientific research personnel, etc. Belonging to professional and technical personnel.

Leaders of enterprises and institutions, their functional institutions and personnel engaged in production technology, economic management and political work in the workshop belong to professional and technical management personnel.

3. When it comes to the specific situation of cross-posts, make statistics according to the main work and working hours of the post or the salary type of employees.

For example, a deputy section chief is an engineer. See if he gets the salary of deputy section chief or engineer.

Another example is: a deputy factory director and chief engineer should be counted as the manager according to the main position.

According to the above description, you can judge for yourself.