6 demonstration articles on safety meeting minutes.

What are the contents of the safety meeting when the safety personnel work meeting is held? Briefly record the safety meeting. This article is a sample of safety meeting minutes for reference only.

Model safety meeting minutes Part I: Time: 20xx March 8th.

Venue: Central Control Room

Participants: central controller, toll collector, external insurance team leader and monitor.

A, safety work requirements

1、

2、

3、

4、

5、

6、

7. Unauthorized occupation of green space; Separate stacking of sundries and waste products; Sleeping in the central control room at night is linked to the bonus; Strictly enforce the gate fee? Do you accept credit cards or not? Provisions; Strengthen the management and training of foreign insurance personnel; Strengthen vehicle inspection at night; Strictly check the unfinished decoration procedures.

Second, the main work completed this week

1, during the centralized inspection of the third phase renovation, it was found that 3 households did not go through the renovation procedures (they have been reissued).

Program);

2、

3、

4、

5、

6、

Demolition of private buildings outside the south gate; Assist monitoring and maintenance personnel to maintain community monitoring; Strengthen the collection of parking fees; There were no cases of theft and public security this week; Assist Yanda Hospital to publicize the free clinic and maintain order;

7. Number of security personnel who raided the emergency assembly (43).

Three. Priorities for next week

1. Supervise the security company to adjust the older security personnel and complete the adjustment before the end of the month according to the company's requirements;

2. Check the work quality of security personnel and make a penalty sheet. If there is any problem that is not rectified in time or there is a phenomenon of deceiving the superior and deceiving the inferior, it will be punished according to the contract and reported to the office with attendance every month;

3、

4、

The security department's 20xx x x day patrol system checks whether the daily patrol is completed on time and according to quantity (quality); Check the decoration, whether to go through the decoration formalities, and whether to decorate illegally.

Model safety meeting minutes Article 2: Meeting place: safety duty room.

Meeting time: 20xx- 1 1-4

Moderator: Fang

Participant: Qiu Zhaoxian

Conference theme:

Meeting contents:

1. The tasks and rules and regulations conveyed by the company must be implemented.

2. Don't break the rules at the critical time, otherwise it will be implemented according to the regulations.

3, arrange to see the garage personnel, must be in the office, shall not take off duty.

4. At 8:30-9:00 a.m., each foreman arranged personnel to open the east shutter door for S..

5. Starting from 20xx- 10-27, if Mr. Wang fails to sign the card, the personnel department will no longer accept the card as invalid. I hope everyone can punch in on time, except for special circumstances (finger explosion). Excerpt from OA

6, night shift to strengthen the inspection of each floor, including the peripheral warehouse on the second floor, to prevent internal and external theft and fire.

7. It is forbidden to urinate in the stadium.

8. Paris will enter the handover immediately in spring, and has rented a house nearby, and there will be a night check at night.

9. The foreman and supervisor of the security department must hand over fixed assets, such as computers, coats, walkie-talkies, batteries, flashlights, fire extinguishers, etc. , and make records on duty. If the security guard takes it away without reason and fails to return it in time, it will be regarded as theft.

10, reasonably arrange the number of diners and the time of each foreman to ensure that there are people at the meeting.

1 1, and the tooling must be neatly dressed.

12, the monitor shall not change the settings or delete the video without authorization. Other departments must fill in the video playback approval form. If more problems are found in the day shift and night shift, inform the foreman in time.

13. Those who leave their posts without permission after punching in at night during the day are regarded as absenteeism. Reflected in the month-end attendance. If the circumstances are serious, it will be reported step by step. A night check will be organized in the near future.

14, each foreman should arrange personnel reasonably, ensure that there are people on each floor, and follow the principle that whoever is on duty is responsible. The personnel on the third floor can be used as mobile posts during the day.

15, the engineering department opened the freight elevator at 8: 30 in the morning, and the supervisor paid attention to monitoring.

16. Please report any emergency in the venue in time.

Article 3 of the safety meeting minutes model: 1. Summarize the weekly work and give feedback on the problems in the work.

Second, organize security guards to learn business every Friday.

Third, learn the company's various management systems.

1, the new attendance system.

2, security dress management regulations.

3, safety badge management system.

4. Staff recruitment and resignation regulations.

Four, safety post responsibility system learning

1, safety post responsibility system.

2. Work standards for safety posts.

3, the relevant provisions of the safety succession and matters needing attention.

4. The regulations and requirements of 4.gfd emphasize the use of polite expressions.

5. Maintain the sanitation of the responsible area, and cooperate with the cleaners of the family members' hospital to clean up and manage the idlers in the community.

Verb (abbreviation of verb) discusses and puts forward constructive opinions and suggestions in future work. Problems to be solved and good solutions. Find out the work and improvement methods that need to be improved in the work, and ask employees to achieve the ideal effect after the work improvement within the specified time.

Article 4 of the model minutes of safety meeting: Meeting time: 20xx year x month x day.

Meeting place: B2 safe lounge

Meeting content: March work arrangement regular meeting

Organizer: Li Jun.

Recorder: Weng Jie

Participants: Yan Ping, Li Bing, Lu Jigen and Tao.

Meeting speech record:

Last week's rectification

Main contents of the meeting:

1. Docking and coordination of the transceiver center:

1) Introduction? Le Chun Express Company Limited? As the receiving and dispatching center of this building, it is expected to be officially put into operation at the end of this month;

2) Communicate with customers. In the future, parcels and letters such as surface mail and express mail in the building will be delivered by the center: couriers will guide them to send express mail to the receiving and sending center;

3) At the initial stage of operation, the mechanism of twice a day is implemented: 10: 00 am? 1 1:00; 16: 00 pm？ 17: 00, during this period, try to control other decoration personnel to use the freight elevator;

4) Cooperate with the receiving and dispatching center to support and explain.

2. Determine the building parking management system and implementation plan:

1) Temporary parking is allowed in the lane of Xu Hong North Road 10 minutes, and drivers are not allowed to leave. Security guards should register well;

2) put an end to the phenomenon of parking vehicles in the square outside the podium for a long time;

3) Underground garage management: unlicensed vehicles that have not officially settled in the customer are allowed to stop temporarily, and communicate with the leasing department to follow up the leasing progress; For unlicensed vehicles that have officially settled in customers, timely convey the vehicle information to the management office, and urge to go through the lease procedures as soon as possible. If it is not handled after one week, it will not be released.

In order to improve the quality of outsourcing services and strengthen the management of outsourcing companies, the management office will organize regular meetings every month from this month.

Meeting:

1) quan' an security company recently arranged for the headquarters training department to enter the site to provide professional training for the outsourced security personnel of the building;

2) standardize the handover ceremony;

3) Replace the personnel whose height does not meet the requirements.

4. The appearance, material and quotation of Hongqiao Road sentry box have been approved, and it is expected to be completed and put into use in early April;

5. Strengthen the inspection and management of the 26F elevator hall and exhibition area, and put an end to it. Navigator? Employees smoke.

Model safety meeting minutes Article 5: Meeting place: project meeting room.

Participants: K4/K9 security guards and the manager of the safety and environmental protection department of the project department.

Conference theme: security work during festivals.

Meeting contents:

Zhou Xiangyang: 1. Security work in the office area.

(1) In case of foreign personnel, they must register for inquiry before entering.

(2) In case of labor disputes, when personnel come to the project department, they must respond, report and do a good job in time.

Organization and assembly of emergency personnel.

(3) At noon and at night during the day, it is necessary to strengthen the inspection and inspection of the door locks of various departments.

2. Site safety work requirements

(1) Each post shall be strictly handed over, and it is forbidden to leave before the successor arrives.

(2) Pay attention to the contents of handover records when handing over posts, and record relevant contents of handover.

(3) The personnel on duty at the sentry box shall patrol and inspect the area under their jurisdiction every half hour, and report to the security captain immediately if any abnormal situation is found.

(4) The handover point of patrol route of night duty personnel shall be designated by the personnel of two adjacent sentry boxes, and there shall be no dead ends.

(5) The emergency report can be directly reported to the project manager, especially for theft, compulsory measures can be taken when necessary, but the scale must be well grasped.

Model content of safety meeting minutes Article 6: Time: 20xx years, x months and x days.

Office of local quality department

Host Feng Haoru, sound engineer Wu Zhiyong.

The main content is about the abnormal quality of various products of Xizhilang.

Personnel sign-in

Main content record

At present, the following quality anomalies have always existed in various products of Xizhilang produced by our factory and external processing factory:

(1) The iron coil purchased and produced by our factory has the following problems: the iron coil can't rotate 90 degrees, the spot welding of the iron coil is out of joint, and the iron coil is not assembled as required; (Inform the processor of the above problems, emphasizing that the relevant processor must be informed to rework. )

(2) The main frame weldments produced by our factory have the following serious problems: lack of assembly parts, spot welding and desoldering, and serious deformation of the round wire frame, which affects the appearance of the products; ;

(3) After spot welding, there are the following serious problems: the iron ring can't rotate 90 degrees, the iron ring is off-welded, and the iron sheet can't be in the same horizontal plane with the round wire frame after spot welding, which seriously affects the appearance of the product; (This question is not open to guests. )

(4) The powder spraying for 8 cups and 12 cups has the following problems: the powder spraying is exposed, the iron ring can't rotate 90 degrees, the iron ring is spot-welded, and the iron ring is poorly assembled. To solve this problem, our department has repeatedly stressed that it is necessary for our factory to arrange full-inspection personnel to spray powder, and the powder spraying factory also needs to arrange full-inspection stations to control the quality after pretreatment, but it has never been done.

(5) The third shelf and the side cabinet shelf are exposed and rusted by powder spraying; The parts of the three-tier shelves and side cabinets in our factory are directly sprayed with powder without pretreatment, which leads to serious rust and paint loss. )

(6) The finished products of the third shelf and the side cabinet shelf have the phenomenon of touching flowers after falling into the box;

In order to ensure product quality, our department has repeatedly suggested taking the following preventive and control measures:

(1) All processors and coils produced by the hardware department of our factory need to be fully inspected by personnel to ensure that the incoming materials are qualified;

(2) When welding the main frame, all assembly personnel are required to conduct self-inspection. If IPQC draws the above bad problems, they all need to be reworked.

(3) Before the spot welding of the main frame, self-inspection is needed before it can flow into the final production process;

(4) Quality control process of all ex-factory dusting parts: all production departments of our factory are inspected and all ex-factory processing personnel are inspected and all dusting parts are inspected and packaged;

(5) Require the Development Department to improve the packaging method;

(6) Strengthen the training of quality awareness and employee awareness of managers in various departments, so that employees can realize the importance of product quality;

? (7) Strengthen QC sampling inspection.