How much does it cost to polish and wax Guangzhou marble?

Honey, I'm glad to answer it for you. Generally, polishing and waxing of Guangzhou marble requires 20 yuan per square meter. You can refer to this price.

Marble, commonly known as marble internationally, is widely used in building interior walls because of its natural and quaint texture and bright color. Because of its loose material, marble is soft and its water absorption is relatively high. There are many seam lines, so in the process of processing, transportation, installation and use, all kinds of pollution, warping deformation and light loss are prone to occur, which affects the decorative effect, so the care of marble is also a compulsory course in the nursing industry. Comparing and analyzing the status of marble veneer, the nursing methods can be divided into:

1: renovation and polishing. 2. Local drip therapy. 3. Cleaning and protective treatment. 4: Crystallization and polishing treatment. 5. Seamless filling treatment, etc.

Let's talk about the construction technology of renovation polishing and crystallization polishing:

First of all, waterproof should be done before decoration and polishing. The purpose is to make the stone absorb as little water as possible, thus reducing the water absorption law of the stone. Then waterproof after 300#. At that time, because polishing will reduce or disappear the waterproof effect, it is best to waterproof after 800# if possible.

Encounter loose stone, such as white sand beige, sandstone, tropical rain forest, wood grain stone, etc. Seal curing agent with high content (such as superhard inorganic coating and silicone resin sealant with content above 40%) should be used for pretreatment, so that the stone can be filled loosely and hardened at the same time.

1. Rough grinding: Use 50#, 150#, 300# and 500# diamond resin hard grinding blocks (do not use soft water grinding discs for rough grinding, which may easily cause waves and affect the flatness). The water supply for rough grinding is slightly larger, but remember not to be too much. After each grinding, thoroughly absorb water and check the deep scratches left by cutting abrasive.

2. Fine grinding: 800#, 1000# and 2000# diamond resin soft water grinding discs are used, and fine grinding accounts for 35% of the whole grinding time. The first light appears after fine grinding to 800#, and the gloss can reach 50 degrees after fine grinding to 2000#.

3. Fine grinding: 3000# diamond resin soft water grinding disc is used for jet A2 grinding, ion exchange and fine grinding, accounting for 20% of the total grinding time. After fine grinding, the glossiness is greatly improved, and the density of marble surface is improved, which lays a solid foundation for polishing agent (NO2Q5 mirror repairing agent) and enhances the adhesion of polishing materials.

4. Polishing: polishing and grinding with animal hair pad with power over 2HP, rotating speed 175-2 10rpm, weight 45-70kg, and animal hair content of 70%, 3M pad, nano pad, marble mirror renovation paste NO2 and 2X mirror lock knife, and the polished marble surface gloss can reach Q5.

5. If it is difficult to make translucent stone, such as jazz white and resin artificial stone, if it is still not bright enough after the above methods, then spray A2 again, polish it with 3000# until it is dry, and then polish it repeatedly with nano-pad, and combine it with marble mirror shaving cream NO2 and 2X mirror lock knife to form emulsion Q5, and the nano-inorganic polymer copolymer will form a crystalline layer with glassy brightness. It has the functions of high hardness, wear resistance, transparency, water resistance, dirt resistance and anti-slip.