How to operate charops automatic edging machine

Operation method of charops automatic edging machine;

1. When using the water tank to supply circulating water, please change the treated water every day to avoid the sewage in the water tank blocking the water pipe.

2. When changing water, unplug the power plug first, then take out the water tank, pour out the waste water, and clean the powder and dirt in the water tank and filter screen.

3. When processing resin sheets, a large amount of foam will be generated in the water tank. When replacing process water, add defoamer and spray it for 7~ 10 times. Defoamer eliminates foam produced by plastic sheets. When there are many bubbles, it can be sprayed directly on the bubbles for 2~3 times and stirred.

4. Clean the water nozzle, unplug the nozzle, and remove the blockage inside the nozzle with a fine needle.

5. Clean the waterproof cover of the edger, and clean it with a brush and a water spray container.

6. Clean the edging room directly with a brush and a water spray container.

7, clean the edger and scanner shell, with a soft cloth dipped in neutral detergent to clean the shell.

8. Dress the grinding wheel.

9. For the edger that moves the nose up and down by the support bar, you can also add a little clock lubricant to the support bar regularly.