Protection of spare parts for intermediate steel rolling

Spare parts worker: I'm a steel worker. First of all, spare parts workers are engineers without professional titles in steel rolling enterprises. Don't look at technicians and drawings unilaterally. Cooperate with the adjuster.

When grinding the roller knife, see what kind of blade the master grinds. Be careful not to scrape the steel with each pass, and ask how to fix the guide plate. Basically, there is a picture when it comes, but it is often not rolled out when it is done right, and it is not harmonious when it comes out. Look carefully before work.

But from what you said, it seems that the Amgen mill only needs to separate the upper, middle and lower rollers, and the pass is good, and the bearings are connected together, which is natural. I feel that I don't need any technology. If there is an opportunity, I'd better learn how to roll, adjust spare parts and straighten them, and then learn that spare parts for steel rolling are not as good as this. This job is all about oil.

1: Rolling mill: the bearing is driven by the motor, which drives the roller to rotate and do work. The fit gap between the upper and lower rollers is called pass, and the blank passes through the middle, forced to form, and passes back and forth until the finished product is obtained.

2. The steel mills generally manage the passes of various varieties in detail. Our factory usually produces/kloc-0 upper rollers, two middle rollers and three lower rollers per pass on the roller table. But every factory is different. Just asking. If you can't see it, you can use the pass template to check it. It's simple.

The equipment in each factory is different, but they are all similar. If possible, it is very pleasant to help. After our successful steel rolling workers go to private enterprises, the salary is: 2000/ month spare parts worker 3500-6000/ month adjustment worker 7000- 10000/ month roll lathe worker 3000-7000/ month. Study hard and pay attention to safety!