Example of summary of technicians' work

Five examples of technicians' work summary

As the saying goes, "It is never too old to learn". I have been strict with myself in all aspects and strive to improve myself in order to adapt to the situation of social development more quickly. The following is an example of a technician's work summary that I compiled for you. I hope it will help you!

Personal annual work summary, technician and budget officer of the construction unit: I didn't give up my job as a technician while working part-time. I have also served as the technical director of several sub-projects, including the first line of the power supply pipeline of the second phase project of the general bulk berth, and I am familiar with the equipment in the workshop. When the equipment doesn't work properly, I look through the old drawings for the first time. Discuss with experienced master and find out the line fault. Because some equipment has been modified many times, the modified state is not reflected in the drawings, so troubleshooting is a very frustrating thing. During this time, I have been in contact with almost all mechanical equipment, especially a polishing and rust removal machine that has been reformed many times. After checking the current circuit, I drew a new circuit diagram, which brought convenience for future maintenance work.

After May, I went to the _ _ Project Department and started a new working life.

Just arrived in _ _, just in time for the busiest installation period of bulk cargo general berth project 1# and 2# substation. The owner requires that the substation should be electrified in advance, regardless of the site construction progress. Therefore, the chief engineer and chief technician have worked out detailed construction plans and progress plans. In order to complete the owner's task, we appear on the construction site every day as soon as we arrive at working hours. Many times, it's time to get off work, and we are still busy in the substation. When there is no light source at the scene, we have installed power distribution cabinets in the weak light of flashlights and headlights for debugging the system during the day.

Preventive test and system debugging of electrical equipment are the most important links in substation installation, especially in the withstand voltage test of busbar and circuit breaker. Because of the unstable power supply, the power was suddenly cut off many times during the test, which caused permanent damage to the test equipment in the worst case. In order to complete the test, we contacted the manufacturer urgently and asked the equipment manufacturer to send spare equipment overnight to ensure the normal test. Finally, the test was successfully completed as scheduled. The installation of the secondary line of power system is a complicated process, and there are dozens of jumpers between only two cabinets. A slight error will bring great trouble to the later debugging. In order to avoid mistakes, I carefully studied the drawings, numbered the control lines in advance and printed out numbered tubes, and then carefully checked them against the drawings when crimping the terminals to avoid mistakes. The "two out of three" locking function of section I and section II high-voltage incoming cabinet cannot be realized. I checked the drawings again and again and carefully proofread every wire. After a day and a night of research, I finally found the reason: the factory drawings were wrong, and I felt particularly fulfilled at the moment when the factory technicians admitted their mistakes.

After more than a month of busy greening, both substations have been successfully electrified and put into use. After that, I began to work part-time in the budget of _ _ District, which was a challenge for me who had never been exposed to economic-related knowledge, but I accepted it.

Start part-time budget work at the end of June. First, I made a monthly test and a monthly report. Studied the form of measurement and monthly report made by predecessors, summed up the rules, and then made this month's measurement and monthly report of this project. Because the previous measurement was inconsistent with the actual progress of the project, and the reported quantities were quite different from those audited by the supervisor, I tried to check the quantities from the construction drawings and convince the supervisor with accurate data. After several months of revision, the schedule and measurement are finally unified. The owners of ordinary bulk cargo berths are very sensitive to the prices of main materials used in construction. All main materials need the owner's participation to confirm the price, and there are relatively many types of main materials in the installation project. When the project is nearing completion and waiting for settlement, all the main materials have not yet completed the quality and price recognition, and the owner's quality and price recognition scheme has been changed many times. It took more than three months to finalize the plan, from reporting the purchase unit price, to providing three inquiry sheets for price comparison, and then to providing purchase invoices for price determination.

Due to the special situation of the installation department, I can always receive large or small projects. During this period, I independently completed a number of project budgets. Including pipeline engineering of temporary storage yard of general bulk cargo berth, hydropower engineering of temporary storage yard of general wharf, hydropower engineering of external network of maritime wharf, pipeline engineering of maritime wharf, temporary power supply engineering of multi-purpose berth, pipeline engineering of comprehensive logistics park, hydraulic structure engineering of general bulk cargo berth, phase II project of general bulk cargo berth, and general

While doing part-time budget work, I did not give up my job as a technician. I have also served as the presiding technician of several sub-projects such as the power supply pipeline of the second phase project of the general bulk berth, the power supply pipeline of the auxiliary construction area project of the general bulk berth, the communication pipeline and the temporary power supply project of the multi-purpose wharf. Due to the special situation in _ _ _ _ area, our technicians have to run to the site every day to master the construction progress and quality, work with the workers of each team, check the engineering quantity and prepare the completion data at night, and arrange the construction for the next day.

The above is my summary of my work in the past year. Looking back on this year, as the most ordinary member of the grassroots, I spent my youth in the vast land of _ _, exercised myself and enriched myself. More importantly, I successfully completed all the construction tasks assigned by the company and presented a generous gift to the company. Looking forward to the new year, I will definitely get a brand new one. Facing the new working environment with a hundred times spirit, I strive to improve my ability and make contributions to the company in the new year.

Since I joined the work, I have been strict with myself in all aspects, working hard, being diligent and practical, and starting from the little things around me.

In order to further improve my skills and become a useful talent, I also actively study cultural knowledge in my spare time. In _ _ _ _, he obtained a junior college diploma in electrical automation from Zhengzhou University of Electric Power, and was admitted to Changsha University of Electric Power in the same year. In, I obeyed the arrangement of the leader of the Ministry of Electric Power Construction and came to the electrical site of Meng Yao Project Department to lay the grounding wire of Unit #6. Because the grounding wire needs to be laid by the civil engineering unit before backfilling, it requires our construction personnel to pay attention to the construction progress of the civil engineering unit at any time. So the first thing I do when I come to the construction site every day is to go to the construction site to see if I can meet the construction conditions, report to the team's master and relevant leaders in time, and be proactive so as not to delay the construction progress. At present, the electrical construction site has few personnel and heavy tasks. In order not to affect the construction progress of the whole project, as long as there is a need to climb up and down, I am young and strong, fasten my seat belt and take the lead. After a day's work, my back ached and my legs ached, but I didn't complain at all and worked hard.

Once, at 3 o'clock in the afternoon, I received a notice from the civil engineering unit that the 0-meter floor of the main factory building would be backfilled the next day, and there was still a lot of work to be done on the grounding wire. As the temporary person in charge, I feel that the task is quite arduous. After receiving the notice, I began to work with four other construction workers in the team. Together, we transported nearly 70 60x7 flat irons to the construction site. Seeing that it was getting dark and the welding task was heavy, I immediately picked up the welding handle and the welding cap and began to work. Although time is tight, both construction technology and quality are required. Until 23: 50 in the evening, the workload of more than 400 meters was finally completed with good quality and quantity, which was well received by the supervision unit and won honor for the project department and the construction site. With the acceleration of the construction progress of civil engineering units, the task of electrical field is getting heavier and heavier. Under the arrangement of the site leader, I began to install the foundation of the auxiliary electrical cabinet. The person in charge of the construction site held many meetings, emphasizing quality first, doing it well at one time, striving for high-quality projects, and actively responding to Party A's two innovations. I deeply understand the intention of the leader, start from myself, go deep into every work, overcome the difficulties of few people and heavy tasks, and strive for perfection in every process. Only in this way can we produce high-quality products. Through our joint efforts, the installation of electrical cabinet foundation has been recognized by the quality inspection department of the project department and fully affirmed by the supervision unit. As a young man in the Electric Power Construction Department of Henan No.1 Thermal Power Company, I deeply realize that I still have many shortcomings to improve.

In the increasingly fierce competition environment in the future, the quality of the century-old plan comes first, and success comes from details. Meng Yao Project Strives for Luban Award. In the future, we should be strict with ourselves with higher standards. No matter what you do, you must be conscientious, strive for perfection, ensure that all the work is completed at one time, meet the requirements of quality standards, start from me, insist on doing one thing, love one thing, and be good at one thing, so as to win glory for the power construction department and the company.

After years of work and study, I also found that I still have a gap from a professional, which is mainly reflected in the immaturity of work skills, work habits and work thinking, and it is also the place where I will constantly hone and improve myself in my future work. To sum up carefully, I have failed in the following aspects in my work in _ _ years:

1. The work organization is not clear enough, so it is necessary to prioritize;

The job of project technician is a complicated job. Need to interface with engineering, marketing, cost, prophase, procurement and other departments to provide technical support. We also need to communicate with design institutes and government departments. If there are many things, there must be detailed and prioritized plans, some need to be completed immediately, and some can be completed slowly. I have made great progress in planning this year, but there is still a lot of room for optimization.

2. Insufficient control over design institutes;

The lack of control over the design institute is mainly reflected in the unsatisfactory progress of some schemes and construction drawings. Some things, the design institute clearly promised to be simple or sincere, but by that time, they could not be finished. In terms of schedule control, the planned completion time node should be advanced for a period of time to deal with temporary things. In addition, in the future contact with the design institute, in addition to contacting the project leader and the people working under him, we should also contact the leaders of the design institute and let them participate.

3. I am not familiar with the drawings and spend less time reading them;

In the first half of the year, we found many problems in the drawings, including mistakes and omissions, and places where the design was not in place at that time, and the control of this piece was obviously insufficient. I have been working at ordinary times, but in the final analysis, drawings are the core of the work of project technicians. Only by closing the drawings can we serve the departments of site, prophase, cost, procurement and marketing. In the future, I will set aside a few nights every week to look at pictures, and then go to the scene to find problems and solve them. Even if some unimportant work is delayed, we should find time to review the drawings and not put the cart before the horse.

4. The work is not exquisite enough;

Usually, the working distance of fine chemical industry lacks a process of introspection, update and modification at any time. Although the work is often reviewed and summarized, it lacks regularity. For example, there may be errors in the updated contents (such as drawings). In the future, we should set a special time to summarize and reflect, such as checking the changes of daily statistics on a certain day of the week, sorting out the time of the month, and so on. With these works, we can achieve Excellence.

5. The working methods are not flexible enough;

After all, our project technicians are engaged in technical management. The staff of the design institute and the technical department of the headquarters are all available resources. If they can use it, they should ask for support from the head office. Don't take things into your own hands. First, it affects the progress, and second, it cannot guarantee the quality. Don't do something thankless, prioritize things, grasp the main contradictions, draw a clear line, and think clearly about what your job is, what help you provide, what you want to do, and what you can control the design institute to do. How to communicate with other departments, how to communicate with design institutes, and how to provide quality services without doing more things other than duties are the places we need to focus on communication and learning in the future.

6. Lack of work experience, especially field experience;

This year's live experience has been greatly improved. I know the whole project very well from the beginning of land purchase to the pre-sale certificate, from the beginning of lofting and positioning to the delivery of property. However, there is still a lack of understanding of some details and specific methods. Many things are on paper, so I need to strengthen field study in my future work.

7. Personal character is weak;

Easy-going communication with people is a good thing, but we must be firm or even tough on professional and principled issues in order to effectively control the progress of the plan and promote standardization. For the design institute, if we are a little more Microsoft-minded and other properties are firm, it will delay the progress, even if the progress is not delayed, it will also cause quality problems caused by rushing to work.

8. Lack of knowledge summary of daily work;

The work summary in the first half of the year has made progress, but it is still not enough. If you look back and think about the right and wrong, gains and losses of daily, weekly and monthly work, you will grow faster. In the second half of the work, I also regard this as the key to improve myself.

9. Doing things is not decisive enough, sticking to details and procrastinating;

Procrastination is one of my great shortcomings. Everything has to be postponed. If I work more actively and resolutely, I will avoid many unnecessary mistakes in my work. In fact, sometimes, you don't have to be serious in your work. Comprehensively consider the progress, quality and cost, grasp the main contradictions, solve the main problems and make corrections at any time. Everything is done carefully, and people tend to stick to details. Learning to be imperfect is also the progress of work and the requirement of fine chemical industry.

In the future work, I will always pay attention to correcting my shortcomings, and I will certainly develop good work habits and grow into an excellent professional in the company.

Examples of technicians' work summary (Chapter III) 18 is a fruitful year. Personally, 18 is a year of comprehensive improvement of personal professional skills. In the past year, as a technical cadre with engineering construction experience, I partially or fully participated in the technical work of several construction teams specializing in steam turbines. It is in this busy and fulfilling year that under the unique conditions of Ludian Power Engineering, on the one hand, I tested my original engineering knowledge and further deepened it, on the other hand, I initially built my own professional knowledge system.

I. Overview of work

The technical work of 18, which I am personally responsible for, can be roughly divided into several time periods according to the key points of phased construction.

/kloc-at the beginning of the Spring Festival in 0/8, I was the only technical cadre of the whole steam turbine team because Haikou and Baima projects were in the critical period of construction. As the only technical cadre of steam turbine team, I am responsible for the technical work of all teams in steam turbine specialty. At the same time, the preparation plan of more than 60 sets of construction drawings of all 2 1 large systems in steam turbine specialty is also a time-pressing, huge and extremely important work.

During the period from April when other technical cadres entered the site to August, my work focus changed, and I was mainly responsible for managing the daily construction technical work of Class 1 and Class 2, as well as the unfinished phased construction tasks in the early stage. During this period, I was mainly responsible for the installation of steel platforms in 1 and 2# steam turbine rooms, the hoisting and hauling of three high-pressure heaters, the installation of traveling rail beam and traveling crane in circulating water pump room, the installation of circulating water pipeline in the factory and the installation of high-pressure water supply pipeline that participated in the water pressure test of 1# boiler in the first-class task of pipeline.

Since August, my technical tasks have been gradually stripped off. In early September, all the tasks of Pipeline Class II were delivered to the newly transferred technical cadres from other places, and the tasks were reduced. From June 5438 to this year 10, I began to take over the installation technical tasks of two steam-driven feed pumps. Facing the new task, my professional skills have accumulated to a new stage. So far, my work focuses on the installation of two steam-driven feed pumps, the installation of temporary steam pipeline purging and the improvement of all steam-water pipeline systems responsible for the first-class pipeline construction.

Second, the work summary

In the work of 18, I have never been intimidated by a series of heavy construction tasks and unfamiliar technical work. I have always despised the engineering and technical work I am engaged in. After all, these works have mature construction experience to learn from, and there are many engineers and technicians like me who are engaged in this work together. But I am cautious about working methods and strategies, because from the working practice of these systems, we can accumulate and learn valuable experience from the working details.

I regard every job given to me by the team leader as a valuable opportunity to accumulate personal work experience. Successfully completing the task is my only work goal, and trying to solve the construction problems is my only work attitude. I participated in every construction task that I was responsible for, and fully grasped the key points of the unit project and sub-project construction. Taking the installation of steel platform and circulating water pipe in the steam turbine room as an example, these two construction tasks were the earliest unit projects carried out by the steam turbine team. During the construction of these two projects, I often rush between the main workshop and the circulating water pipe trench to check the implementation of key points of the project and discuss with the construction team leader to solve the construction difficulties. It is precisely because I really put myself into the project construction process that I have mastered the span and verticality of steel platform columns, the installation elevation control of steel column nodes, the connection quality control, the installation quality control of circulating water pipes and so on.

To say hardship and fatigue, every worker on the construction site must have a deep understanding, and as a team technician, I have a special taste in it. At the busiest time of engineering construction, I have to run nearly 20 construction teams every day, and I have to run back and forth from the 6 1 m floor of the boiler to the circulating water pump room several times every day for only one reason-I am an engineering technician. Because of the need of work, in the hot weather of more than 40 degrees in summer, I also discussed and solved the construction difficulties of circulating water pipes with the construction team leader under the scorching sun and checked the construction quality. Since I entered the construction site this year, I have only taken five days off for more than 300 days. The rest of the time, like the workers in the steam turbine team, I am busy working overtime every day for the smooth operation of the company's first 600mw unit, rain or shine.

As an employee of a modern large-scale enterprise, as an engineer and technician in a new era, I not only work hard, but also constantly sum up my progress. The conventional construction technology has long been firmly in my mind, and the new problems and difficulties encountered in the construction process are the focus of my summary. When the project is busiest, it is impossible to solve everything on the same day every day, so I will classify these things and deal with them in a planned way. Because my only project construction experience before Luzhou project was Panzhihua 135mw project, I had insufficient work experience and encountered many problems. For my shortcomings and mistakes, I corrected them in time, and for the established facts, I took a positive approach, analyzed the reasons from my shortcomings and mistakes, summed up the experience and lessons, and made them my own wealth.

In addition to technical work, I also hold positions in the general branch and installation branch of the engineering project department, and I am also the person in charge of Qing 'an post of the steam turbine team. Participating in youth activities is always my safety. I actively participate in every activity of the Youth League Committee and perform my duties well in the activities of the Youth League Committee. In the youth activities, my only regret is that due to my busy work, I didn't carry out the activities of young workers in the steam turbine team as planned, and I didn't complete the propaganda task of 18 steam turbine site well, which is the failure of my project.

Three. abstract

I have always admired such a philosophical saying that a gentleman strives for self-improvement, and I have always demanded myself by the standards of an excellent engineer and technician, and I have made progress myself because of this requirement. The glory of the company needs our efforts to create, and personal development needs our own efforts to achieve. For these lofty goals, I have been making unremitting efforts and struggles. In the future work, I will continue to guard against arrogance and rashness, work hard, closely unite with everyone in the company's big family, realize the company's take-off with my brilliant youth, and write my own chapter with no regrets.

Examples of Technician's Work Summary (Part IV) 20__ years have passed quickly, and a new year is about to begin. Looking back on the work experience and lessons of the past year is helpful to foster strengths and avoid weaknesses in future work and do technical work better. The following is a summary of several aspects of work in the past year:

As a technician and budget officer of the installation department, I completed the operation and management of the construction department on time according to the rules and regulations of the company and the installation department.

In the past year, * * * participated in the blue prints.the design work of six new buildings, and informed the construction personnel of the blue prints.the design contents in time. After the blue prints.the design, prepare the construction organization design and technical disclosure in time and distribute them to the construction personnel. During the construction process, a number of newly-built projects and projects under construction repeatedly negotiate to change the water, electricity and heating projects according to Party A's requirements. Due to the lack of design drawings that meet the use function, Party A often makes temporary changes during the construction process. Changes that can be made before construction are timely and accurate, while some changes cannot be signed before construction. They will sign it as soon as the construction is completed.

For projects under construction and newly started projects, timely and accurately collect material certificates, conduct material tests, concealed works acceptance, inspection lot quality acceptance and divisional works quality acceptance according to the project image progress, and find the signatures and seals of Party A's land engineer and supervision engineer in time to ensure that the dates of each inspection lot, divisional, concealed acceptance and material test of construction materials can be consistent with the actual construction date and meet the requirements of data compilation.

* * * This year, the budget and final accounts were prepared in _ _ copies, with the budget cost of _ _ yuan, and * * approved the construction of _ _ building, with the final accounts cost of _ _ yuan, with a total audit of _ _ yuan.

This year's technical management, data compilation, budget and final accounts mainly have the following characteristics:

1. The construction sites are scattered, with a wide area and long trunk lines: there are two residential buildings in Shidao this year, with steel ropes on the cliff in the west, technical schools in the east and rubber factories in the north, and the construction sites are far apart.

2. There are many construction companies in the same community: the technical school student apartments, salt residential buildings C#, D# and steel cord workshops are all adjacent to many construction companies. The quality of works is not only a personal problem, but also directly affects the reputation of the company.

In view of this situation, it is necessary to arrange the work reasonably, prioritize, grasp the key points and give consideration to others.

On the last night, even working overtime until dawn, Party A will complete the change of floor plan and system diagram on the day when the workers leave, and conduct on-site visa with the construction personnel and Party A..

The time set by Party A to listen to the final accounts of the project is guaranteed to be on call, regardless of the distance of the road, the hot and cold weather, and whether the road surface is frozen or not, ensuring that the final accounts can be completed in time.

In last year's work and daily life, we found some common quality problems in hydropower heating construction, as follows:

1. The joint between toilet washbasin and drain pipe is not sealed;

2. Unclear color separation of wires;

3. The broken wire card in the lightning protection box is rusted;

Problems at work

(1) lacks corresponding experience. When the company checked all engineering data in August, it was unclear about the setting of checkpoints in the quality acceptance of the inspection lot;

(3) Due to many projects and heavy tasks, individual engineering data cannot be synchronized with the projects.

Although the above problems can't affect the project quality and project acceptance, I always feel that I haven't done my duty as a technician and budget officer, and I will try my best to do better in my future work.

By summing up the work in the past year, we can find out the shortcomings in our work so as to overcome them in our future work. At the same time, we need to read more books, study norms and related documents, master professional knowledge, improve our working ability, strengthen our sense of responsibility, and do our personal work in time.

The first half of 20 years has passed. As a technician in a gas enterprise, with the care and support of company leaders and colleagues, my theoretical level and professional quality have made great progress through this period of study. I actively integrate theory with practice, adhere to the principle of "safety first, strictly follow the process" and do my job well. The work summary and report for the first half of this year are as follows:

1.In the first half of 2000 136 households installed hanging tables in single-family stock houses. In the first half of 2000, single-family development and construction contracts were compiled, and the relocated households were rectified.

Second, update and improve the current map of Dunhua pipe network in time, sort out the data of Dunhua pipe network, and collect some knowledge about gas.

Third, grasp the construction progress in the first time, timely grasp the mobilization of personnel and equipment, record the construction progress, check the construction power consumption, construction safety and construction status of the project department every five days, and put forward suggestions and rectification for the deficiencies.

Fourth, the weekly maintenance of the station.

Five, actively participate in the blue prints.the design, participate in the preparation of dangerous operation plan.

Six, strengthen the study of technical expertise, and constantly improve their own quality.

Technical work is the most taboo. If you are content with the status quo and don't make progress, you will be eliminated. Seriously study gas-related knowledge, understand and be familiar with the technological processes of various operations. In addition to learning rules and measures, I also collected and learned some knowledge about natural gas online.

7. Existing problems and shortcomings,

Looking back on the work in the first half of the year, I still have some obvious shortcomings, mainly in:

1. I don't have enough time to study the policies, documents and spirit of my superiors, and I don't have enough learning depth and understanding.

2. Technical management, construction management and safety management need to be further strengthened, and the ability of organization and coordination needs to be improved.

3. There is still a certain "good man" thought, and work execution and determination need to be strengthened. For the shortcomings, I will try my best to overcome them and make unremitting efforts for the tasks in the second half of the year!