Maintenance method of starting motor of washing machine

The starting motor of the washing machine is one of the core components of the washing machine, which is responsible for starting the machine and driving the gear to rotate, so that the washing machine can work normally. If the starting motor of the washing machine fails, it will affect the working efficiency and service life of the whole washing machine. Therefore, it is very important to repair the starting motor of the washing machine in time. The following are some maintenance methods for starting motor of washing machine:

1, clean the motor:

In some cases, dirt and dust may make it difficult for the motor to start or stop working completely. Therefore, the starting motor of the washing machine should be cleaned regularly to keep the motor clean and ensure its normal operation. Take the motor out of the washing machine, clean the motor surface and winding with a brush and detergent, and remove the residual dust with air.

2. Check the motor circuit:

A circuit fault may cause the motor to fail to work properly. Check the motor circuit with multimeter or circuit test tool. If cable or wire damage is detected, the wire or cable needs to be replaced. Check whether the connectors and plugs are installed correctly, and make sure that the wires and connectors are not broken or loose.

3. Replace the carbon brush:

The carbon brush of the motor may need to be replaced due to excessive wear, which will make it difficult or even impossible to start, so it should be replaced regularly. Remove the motor, remove the protective cover of the carbon brush, check the wear of the carbon brush, and replace it if it is excessively worn.

4. Replace the motor:

If none of the above methods can repair the starting motor, it may be necessary to consider replacing the motor. Before replacing the motor, it is necessary to check the motor to ensure that the fault of the motor is not caused by the fault of other components. If the motor needs to be replaced, it is recommended to buy original parts to ensure the quality. And unplug the plug before replacement to ensure safety.

In short, in the face of the failure of the starting motor of the washing machine, we can repair it by cleaning, checking the circuit and replacing the carbon brush. If all the above methods fail, you need to consider replacing the motor. Note that the plug needs to be unplugged before maintenance to ensure safety.