How to adjust the front limit of two heads of Tianjin Jianke CNC bending machine

Tianjin Jianke CNC bending machine has the following methods to adjust the front limit of left and right machine heads:

1. First, move the nose to the position that needs to be adjusted, and stop the nose at this position.

2. Find the left and right front limit switches of the machine head, which are small black buttons located on the left or right side of the machine head.

3. Turn the left and right limit switches in front of the machine head to a proper position, so that the machine head will not exceed the required position.

4. After the adjustment is completed, press the "Manual" button of the machine head, move the machine head to another position, and check whether the machine head stops at the correct position.

5. If the nose does not stop at the correct position, it is necessary to readjust the limit switch until the nose stops at the correct position.