What is a blister board? Which is better, blister board or mold board?

The cupboard is one of the most important homes in our kitchen. There are many kinds of materials for making cabinets, and plastic plates and templates are one of them. Then someone asked, what is a plastic plate? Which is better, blister board or mold board? Let's take a look!

Which is better, blister board or mold board?

1, what is a blister board:

Plastic sheets, also known as density sheets, are generally divided into ABS (acrylonitrile butadiene styrene), PVC (polyvinyl chloride) and PET (polyethylene terephthalate). Its surface is vacuum-absorbed or hot-pressed with disposable seamless PVC film. Plastic sheets with a thickness of 0.05 mm -3 mm and a thickness greater than 3 mm are more suitable for producing large-size products with movable doors. Moreover, it is rich in color, not easy to crack and deform, and simple in daily maintenance, which is deeply loved and trusted by consumers all over the world.

2. What is a template?

The base materials of molded door panels are medium density board, high density board and steel plate. The surface is generally made of natural solid wood bark, such as Fraxinus mandshurica and black walnut. , or PVC or PP film, some do not stick to the skin. After one or two high-temperature and high-pressure molding. After grinding and polishing, PVC film is closely attached to door panels and other products. It has the characteristics of low carbon, environmental protection, beauty and no cracking.

Comparison of advantages and disadvantages between plastic suction plate and die pressing plate;

1 Advantages of plastic door panel: Plastic door panel is an amorphous, odorless, nontoxic and highly transparent colorless or yellowish thermoplastic engineering plastic with delicate appearance, good environmental protection performance and stable mechanical properties in a wide temperature range.

Disadvantages of blister board: poor fatigue strength, easy stress cracking, poor solvent resistance and poor wear resistance.

2. Advantages of the molded door panel: The molded door panel is a suction panel with rich colors, realistic wood grain and no easy cracking. The four panels are sealed into a whole without edge sealing, which avoids the problem of glue opening after edge sealing. It has been used as a door panel material for kitchens, bathrooms and other furniture in Europe.

Disadvantages of die pressing plate: the design subject should not be too long and too large, and it is easy to deform. The temperature of cigarette butts will burn the film on the surface of the plate.

Use of plastic suction plate and die pressing plate;

1. Plastic sheet, as a new type of green environmental protection material, is suitable for indoor decoration, automobile interior, mobile doors, daily necessities, electronic products and other fields because of its light weight, glossy surface, moisture resistance and sound insulation.

2. The invention has the advantages of good waterproof performance, environmental protection and various shapes, colors and textures. It is also a product with high cost performance, which is often used on the panels of cabinets and bathroom cabinets.