How to use Nanbao Resin Adhesive 105? Specific process.

1, degrease the surface of the new frame, roughen it with a file or emery cloth, and then clean it with a brush or dry cloth. When the mesh number of the screen is greater than 100 mesh or less than 300 mesh, evenly coat a thin layer of glue on the screen frame as primer, and dry it for later use;

2. Clean the old screen glue and oil stain with special metal frame cleaner, and dry it for later use;

3. When the mesh cloth is pulled to a certain tension, and the mesh cloth is closely attached to the frame, a glue line is poured on the mesh cloth of the mesh-adhered part, and then the mesh-adhered part is scraped with hard rubber or thin wood board to make the glue leak into the mesh frame through the mesh cloth until the mesh-adhered part is completely filled with glue;

4. If the mesh frame of the adhesive part is uneven locally, there will be a phenomenon that the mesh and the mesh frame can't contact when the mesh is stretched. When the glue does not stick, press the net-sticking part with a heavy object to make the net and the net frame stick together closely, and the net and the net frame stick together;

5. After the gluing operation is completed in summer, the metal frame needs to be parked for 65,438+05-20 minutes, and the wooden frame needs to be parked for 65,438+00 minutes before the mesh can be attached to the frame. After being fixed,

Spread glue evenly on the mesh, let it stand for 30 minutes, then take it off the tension machine for use, and let it stand at room temperature for 65438 0 hours before putting it into use; After the gluing operation is completed in winter, the metal frame is parked for 8- 10 minutes, the wooden frame is parked for 5-8 minutes, and the net is attached to the frame. After the mesh is fixed, it is evenly coated with glue. After standing for 60- 100 minutes, it can be taken off the tension machine and put into use after being parked at room temperature for 3-4 hours.

6. In order to reduce the shrinkage of the screen and strictly control the tension of the screen, it is necessary to adopt the process of tightening the screen → standing → loosening → standing → stretching the screen again → standing → stretching the screen → measuring the tension → gluing.