2019 Graduation Internship Purpose and Content for College Students Graduation Internship Purpose and Content

Part 1

1. Purpose of Internship

1. Through graduation internship, the theoretical level will be raised to the practical level, so as to better realize what has been learned during college. The combination of theory and practice can further deepen the understanding of theoretical knowledge, understand and master the production process, process principles and technical requirements in actual production, and lay a good foundation for future study and practical work.

2. Develop good study habits that are good at observation and diligent thinking, as well as a rigorous scientific attitude and practical ability, so that theory and practice can be well combined.

3. Through this internship, I can personally experience the process of transforming from a student to a professional, further understand the society, enhance my sense of responsibility and mission for socialist modernization, and prepare for leaving school and Be fully prepared to go to society, adapt to society, and integrate into society.

4. This internship played a very important role in completing my graduation project and internship report.

2. Internship content

1. Factory introduction

Saiwen Industrial Co., Ltd. was established in 1997 as a joint venture between Hong Kong and Japan with a registered capital of 1 billion Hong Kong dollars. It has a group of professional technical personnel and management personnel. As a provider of overall transportation packaging solutions, Saiwen Company mainly produces industrial packaging products that process paper, wood, plastic and composite materials.

After years of development, Saiwen Industrial Co., Ltd. has now established factories in Tianjin Economic and Technological Development Zone, Wuqing District and Suzhou, and has set up factories in Beijing, Shanghai, Nanjing, Hangzhou, Changzhou and Nantong. Logistics center. With the expansion of international business, Saiwen registered companies in Hong Kong and Canada, and established an office in Germany. Currently, Saiwen has nearly 200 stable customers including Airbus, Toyota, and Motorola.

The TEDA factory has a total area of ??40,000 square meters, a construction area of ??14,000 square meters, and a total of 300 employees.

The Wuqing factory (under construction) has a total area of ??40,000 square meters and a construction area of ??12,000 square meters.

The Suzhou factory has a total area of ??11,000 square meters, a construction area of ??8,300 square meters, and a total of 100 employees.

The main customers in North China are: Motorola, Toyota, Siemens, Simclar, Sew, Trw, Danfoss, Lohmann, Danaher, Woodward, Foxconn, Laird, Canon, Sanyo, Stanley & Denso. The main customers in East China are: : Flextronics, Motorola, Sanmina, FCI, SEW, Danfoss, Benchmark NEC & Alcatel-Lucent.

Corporate Culture:

(1) Vision: To become China’s overall transportation packaging solution in 20xx Program leader.

(2) Mission: Pursue rational growth, operate for a century, and seek balance and satisfaction among employees, customers, and social responsibilities.

(3) Core values:

Mutual trust: Adhere to the principle of mutual trust and establish long-term trusting relationships with employees and customers.

Rapid response: quickly understand and meet the needs of the market, customers and employees.

Professional: Focus on overall transportation packaging solutions and products, and continue to innovate to maintain industry advantages. Sustainability commitment: The company and individual employees should adhere to the commitment of a hundred years of operation.

Professional research and development, high-quality design: through various exhibitions and international exchanges, we master the cutting-edge technology and advanced materials of overall packaging, and constantly optimize products; we inspect and analyze the appearance, quality, protection level, and operation of customer products In terms of storage conditions, transportation and environmental factors, we provide customers with comprehensive transportation packaging solutions, and strive to provide customers with high-quality and reasonable designs and continuous improvement.

Strict quality control, advanced management: Saiwen regards product quality as the vitality of the enterprise and strictly controls all aspects of the production process; we are the pioneer of lean management, JIT and VMI in China's packaging industry, with With many years of experience in cross-regional operations across the country, we have continuously improved our capabilities and processes during development, and grown together with our customers.

Quick response, flexible service: Saiwen has a 7×24-hour rapid response speed, fully meeting the requirements of customers’ lean production model, and providing JIT services. The company’s vehicles are all equipped with GPRS systems, which greatly improves the transportation process. Real-time electronic monitoring is achieved. We can also select experienced technical engineers to provide standard on-site packaging services to customers based on their needs.

Overall solution, green packaging: Saiwen optimizes and integrates various materials and technical means such as wood, paper, plastic, metal, foam, and anti-rust to avoid insufficient packaging and excessive packaging; adhering to green environmental protection Concept, implement the principles of reduction, recycling and recyclability in packaging materials, design and production, use environmentally friendly materials as much as possible, design foldable packaging to reduce empty loads, improve material utilization and reduce resource waste.

Technical advantages: We have many packaging experts and a large number of technical R&D personnel. We have a relatively complete management mechanism and a complete packaging theoretical basis.

Equipment advantages: We have ring pressure tester, burst tester, puncture test, instrument pressure testing machine, RoHS: energy dispersive X-fluorescence spectrometer, drying oven, moisture meter, measuring instrument, etc., from small batches to It can be produced in large quantities without any minimum order limit.

2. Specific internship situation

After many negotiations with the company, I finally got the company’s permission and was fortunate enough to visit the company and conduct a four-week internship in the company. When entering the company, we first learned that the company organization consists of six departments: business department, production department, finance department, purchasing department, management department, and technology department.

According to the business department, the current business work is mainly divided into two parts. One part is to track the order status of existing customers, especially the daily orders, shipments, and quality of large customers. The other part is to develop new customers, introduce the company's products to relevant enterprises based on existing information, and promote products.

I think the company’s business division is very reasonable, because when there are stable customers, it is also necessary to develop new customers. However, the development of new customers requires the manufacture of related molds, which are expensive. However, this customer has many unstable factors and cannot ensure long-term cooperation. Instead of investing resources in uncertain business, it is better to invest more resources in transforming equipment. Or build a good relationship with original customers to seek longer-term cooperation. Therefore, the work principles and policies of an enterprise are determined by the actual needs of each enterprise and are not copied numbly.

Production is the basic department of the company. According to employees in the production department, there are many types of production and it is relatively complex. As long as the product is designed and finalized, the production department will be responsible for producing the parts that can be produced, and then put the finished product into the warehouse and wait for the sales department personnel to arrange shipment.

The main job of the technical department is to design the overall packaging, which is the main core part of the company. Design product packaging according to customer information and requirements. During the design process, in order to make the design more in line with customer requirements, the technical department often needs to communicate face-to-face with customers, or go to the customer's company to see actual products and conduct on-site dimensional measurements. At the same time, the work of the technical department also includes mechanical inspection, maintenance, and adjustment. The professional knowledge level of technical personnel is relatively high, and the responsibilities they shoulder are relatively large. I suggest that the company can regularly organize employees to participate in various training courses to improve production capacity.

After getting to know the factory situation, I conducted practical operations in the production department and technical department for a period of time. In the production department, I follow the instructions of the master to switch the machine on and off, stop the machine in an emergency when necessary, and press the relevant buttons when needed. I have to admit that my practical ability is poor and I often make mistakes, which sometimes delays the progress of other processes. Despite this, the master patiently pointed out the causes of errors for me, analyzed the correction methods, and demonstrated the operation for me many times. Sure enough, using the tricks taught by my master, my operation progressed very quickly, catching up with other people's operations step by step, without delaying the normal operation of production. In the technical department, my solid theoretical knowledge and skillful use of CAD came in handy. Based on the drawings given by the master and customer requirements, I displayed the data in the CAD drawings, printed out the drawings I made, and handed them to the production department. , they can produce as usual. My colleagues in the technical department are very friendly to me and often give me suggestions for working more efficiently, which has benefited me a lot. Chapter 2

Professional internship is an important teaching link. It is the main means to test students’ mastery of theoretical knowledge and whether it can be applied to graduation practice. It is also an important way for graduates to open up the job market and recommend themselves to the society. way. Through professional internships, we can also strengthen the relationship between our teaching units and production units, collect opinions and suggestions from production units on our school running, so that we can sum up experience, further improve our school running direction, improve teaching quality, and improve the quality of our school graduates. competitiveness.

1. Purpose of internship

1. To enable students to have comprehensive contact with society, understand society, and adapt to society as early as possible.

2. To fully apply the theoretical knowledge and experimental skills learned in school to production practice and improve students' comprehensive quality.

3. Enable students to have a basic grasp of production factors such as technological processes, management methods, policies and regulations in the fields of pharmaceutical and food production, inspection, and circulation, and strive to cultivate students' ability to work independently in the pharmaceutical industry.

4. Through professional internships, obtain timely feedback information, continuously improve teaching work, and improve the quality of school running.

2. Internship candidates

1. 20xx undergraduate students majoring in Traditional Chinese Medicine, Food Science and Engineering, and Pharmaceutical Preparation.

3. Internship Form and Arrangement

1. Internship Form

In principle, students should give full play to their abilities or make use of various social relationships to contact them for internships. units in order to lay the foundation for employment.

Students who have difficulty in contacting the internship unit personally will be assigned to the internship unit by the college at its discretion.

2. Internship unit

Traditional Chinese Materia Medica and Pharmaceutical Preparation Major: All enterprises and institutions related to Traditional Chinese Materia Medica and Pharmaceutical Sciences. Specifically, it includes pharmaceutical companies, drug testing institutes, drug research units, drug business units, hospital preparation rooms, hospital pharmacies, various medical schools, etc.

Food Science and Engineering Major: Food-related agencies, enterprises and institutions. Specifically, it includes food production and processing enterprises, food supervision agencies, food inspection and quarantine agencies, food sales enterprises, food schools, etc.

3. Time arrangement

According to the requirements of the training plan, from March 3 to May 5, 20xx, ***8 weeks, tentatively scheduled for June The internship summary will be conducted in the hospital on the 10th (the specific time will be based on the time when graduates go through the formalities for leaving school).

Students who are defending their graduation thesis for the second time should be prepared to return to school for the defense in mid-April. The specific time will be notified later.

4. Internship Requirements

1. Each intern student must carefully study and keep the internship plan, intern rules, and internship performance evaluation form, clarify the internship tasks and requirements, and master the time , Ensure that the internship is carried out strictly as planned.

2. Understand the physical situation of the internship unit, including development history, current situation, development plan, characteristics, system, operating procedures and other issues.

3. Master the factory design, workshop layout, equipment types, formulas of main varieties, production process flow, inspection methods of finished and semi-finished products, etc. of the internship unit.

4. Be able to discover problems existing in the internship unit in production, operation, management, technology, craftsmanship, etc., and dare to boldly put forward suggestions or ideas for improvement.

5. Write an internship diary (internship manual) in a timely manner, and carefully record and summarize the day's work and study.

6. Interns must submit the following after returning to school:

(1) Fill out a qualified professional internship handbook, the content must be related to the major.

(2) Form and related comments Completely filled out, signed and stamped professional internship performance evaluation form. The stamping unit must be related to the major.

(3) Round-trip tickets from Tonghua to the internship site from January to March 2014 and from the internship site to Tonghua from May to June 10, 2014, are available by train or car.

(4) Internship photos (electronic version), photos of me in front of the door of the internship unit, photos with the instructor of the internship unit, photos with teachers from our school when going for inspection, photos at work 1 work photo each.

5. Inspection and Assessment

1. During the professional internship period, college leaders and instructors will go to the students’ internship units from time to time to check the students’ internship status.

2. Entrust the relevant responsible comrades of the student’s internship unit to inspect and assess the intern students, and issue written assessment opinions at the end of the student’s internship.

3. Students’ internship results are divided into five grades: excellent, good, medium, passing, and failed. They are determined by the appraisal opinions of the student’s internship unit (30%), the opinions of the instructor (30%), and the internship manual. (40%) consists of three parts, and the grade must be stated for each item. The comprehensive internship results will be recorded in the student file. Those who fail in the internship will not be able to graduate. Chapter 3

Purpose of internship:

Through on-site visits to water conservancy projects and explanations by technical personnel, understand the history of water control in my country and Shandong Province; understand the importance of water conservancy in the national economy ; Understand the meaning of traditional water conservancy, modern water conservancy, and sustainable development of water conservancy; Understand the famous water conservancy projects that have been built and under construction; Understand the application and risk removal and reinforcement of water conservancy projects; Be familiar with earth-rock dams, sluices, aqueducts, channels, and backwaters; The role, layout, composition and impact of hydraulic construction projects such as siphons and embankments on local economic development; understand the construction, organization and management of the projects, as well as the bidding and bidding situation. It enables students to increase their perceptual understanding of water conservancy engineering, consolidate students' professional thinking, allow students to understand the professional training goals, and lay a good foundation for the next step of learning professional knowledge. Through internships, students' determination and confidence to love the motherland's water conservancy industry and be willing to engage in water conservancy project construction are also cultivated.

Internship content:

(1) Listen to reports on the water conservancy situation.

(2) Watch the video to learn about the history of water control and water conservancy development in my country and Shandong, as well as the famous water conservancy projects in my country.

(3) Visit Century Project: The projects include:

① Rizhao Reservoir: the construction background of the hub project, the role of the project, the composition of the hydraulic structures, and the problems existing in the project and the risk removal and reinforcement situation and the comprehensive utilization and management of the project, understand the impact of the project on the local economy of Rizhao, understand the impact of the project on the surrounding environment, and understand the business requirements and comprehensive ability requirements of the technical personnel.

②College water axis project: the significance of project construction; the composition of the project and the functions of each part.

③Douyazi Reservoir: spill dam; wave wall.