Job Recruitment Website - Recruitment portal - Recruitment line trimmer

Recruitment line trimmer

If there is a thread on the new dress, cut it with scissors. ? For the quality first assembly line, after sewing, workers are not only required to cut the thread ends, but also to check the sewing effect by themselves. If the stitching effect is not good, workers need to take out stitches and sew again immediately. For some special parts, stitches are not allowed to be removed and re-stitched. Must be in place at one time, and ask the workers to take their time.

Extended data:

Clothing quality discrimination

To check the quality of clothing, firstly, measure the length, bust, leader length, shoulder width, trousers length, hip circumference and waist circumference according to the model marked on the clothing to see whether the size specification is accurate, and the error should generally be less than 1.5%. After checking the specifications, it is important to check the internal quality of the clothes. The methods are visual inspection, ruler measurement and strict inspection. You'd better have a visual inspection before trying it on.

1, coat: check front, back, left and right. In front, observe whether the two sharp corners of the collar are symmetrical; There should be no height or skew, it should be stiff, the collar should be as big as the neck, and the collar should not be exposed; Whether the pocket position is symmetrical, whether the shoulder is wide and comfortable, whether the rear fork is flat and comfortable, the side mainly depends on whether the shoulder seam is straight, whether the clothes sleeves are round and even, and there can be no unevenness or dent.

Then see if the sleeves are consistent and the seams are straight and flat.

2, pants: can be divided into plane, upper, three-dimensional inspection. Plane inspection, choose to align and flatten the seams to see whether the seams are straight without cracking, whether the side seams are flat, whether the padding is exposed, and whether the trouser legs are consistent in size without sagging. Then pull up a trouser leg to see whether the lower seam is aligned, straight and not cracked, and whether the intersection with the rear seam is straight.

Whether the lower seam of the trouser leg is aligned, straight and free from hanging cracks, whether the intersection with the back seam is straight and whether the lower seam of the trouser leg is hung. Check the upper part, mainly to see whether the waist is straight, not fat or tight, whether the hem and seam are symmetrical, whether the back pocket is flat, whether the small lapel is flat, whether the position is accurate, and whether the front lapel and the inner lapel are qualified and round; Whether the zipper is flexible.

During the three-dimensional inspection, lift the waistband according to the wearing shape to see whether the front and back seams are round and smooth, whether the four squares are straight, and whether the pants seams are flat and crack-free.

Reference: Baidu Encyclopedia-Clothes