Processing flow and steps of panel furniture

Brief introduction: Panel furniture is a kind of furniture made by painting and other processes. Most panel furniture is imitation wood furniture. Now the surface of panel furniture on the market is more and more fine and realistic, and the gloss and feel of panel furniture are excellent, which brings many different experiences to consumers. Do you know the processing flow of panel furniture? Let's take a look at what the processing flow of panel furniture includes.

Processing flow of panel furniture:

The production process of panel furniture consists of many links and steps, such as preparation of raw materials, carpentry, painting and finishing, and packaging and warehousing of final products. The complexity of plate technology is closely related to many factors such as product appearance design, product structure, materials used and the variety and quantity of products on the production line. For the drawer bottom plate, only cutting is needed, while for the honeycomb hollow floor cabinet panel, it takes more than twenty processes to process a panel.

The main components of plate production technology: raw materials, process documents, mechanical equipment, operators and corresponding quality and production management systems. Among them, the timely arrival of raw materials is the premise and foundation of the whole process, while the process documents are the basis of the whole process and management activities, and the process documents should be comprehensive and detailed. The process documents of panel furniture probably include: effect drawing, three views, parts exploded drawing, parts processing drawing, hardware parts list, packaging scheme, installation drawing, BOM, parts processing process flow chart and product instruction manual. Among them, the part processing diagram should be combined with the part processing process flow chart, and run synchronously with the part products on the production line, with the best effect. The main contents in the part processing flow chart should cover the basic contents such as name, specification, quantity, material, batch, processing precautions, special inspection standards, working hours, working procedures, number, etc. Machines, equipment and operators are the guarantee of processing.

The main production technology of panel furniture: panel furniture has different technological processes because of its different surface materials and decorative effects. The main representative categories are: wood veneer panel furniture, adhesive panel furniture, solid color panel furniture, melamine panel furniture and mixed panel furniture composed of one or more of the above categories. Next, we? Understand the specific production process of panel furniture through a table.

Processing steps of panel furniture:

1, the large-format plain board shall be cut flat, with no more than three layers each time.

2. The difference between the size of the plate and the head after manual sawing should be less than? 2 mm.

3. The sawed plates should be stacked in a dry place, and each cargo hold is allowed to stack about 50 layers. At the same time, the process card should be clearly written.

4. Sanding with constant thickness requires that both sides of the core material be cut evenly.

5. It is required that the amount of sanding on one side should not exceed 0.5mm at a time.

6. After sanding, the front and rear core materials should be connected end to end and fed continuously.

7. The glue amount of the coated material should be evenly coated on the surface of the material. No glue leakage. There is no residual glue overflowing at the edge.

8. Manual operation is carried out in the embryo assembly stage, and the fiber direction of veneer and veneer is the same.

9. Put the slab into a press, pressurize, stabilize and relieve the pressure, and stack the composite plates.

10, precision edge circular saw and double-sided trimming saw.

1 1. When trimming the cladding, first cut a groove on the back of the cladding with a scribe saw to cut off the fibers on the back of the cladding to prevent cracking.

12, linear edge banding machine, curve edge banding machine and opposite edge banding machine.

13. requirements for edge sealing of composite plate: the combination shall be firm, sealed, smooth, clean and free from glue marks, so as to ensure the accuracy of size and shape.

14, vertical milling machine, rotary table milling machine, router, and vertical milling machine need to process the cover plate in large format. Rotary milling machine can process all kinds of curved composite plates. This router can be used for grooving and carving.

15. Rest the covering material to improve the smoothness.

The above is the processing flow of panel furniture. You got it? I believe that through the above introduction, everyone has basically got a general understanding of the processing technology of panel furniture. Through the above processing of panel furniture, we can quickly create exquisite and beautiful panel furniture. If you are also interested in the processing technology of panel furniture, please come and see how Bian Xiao introduced the processing technology of panel furniture. I hope the above introduction can bring you some help. With such careful processing, I believe you will like panel furniture even more.

Tubatu Online provides you with "every decoration quotation, 1-4 local decoration companies, 3 sets of decoration design schemes" and the decoration pit avoidance strategy for free! Click this link:/Zhu Ye /zxbj-cszy.php? to8to _ from = SEO _ zhidao _ m _ jiare & amp； Wb, you can get it for free ~