Summary of personal work in the evaluation of junior professional titles

Personal Work Summary of Junior Professional Title Evaluation 1 I was born on October 22nd, xx/KLOC-0, graduated from Sichuan University of Technology in February, and was evaluated as an assistant engineer in July xx. I have been engaged in project construction management since graduation. During this period, I worked hard to learn professional technical knowledge and devoted myself to scientific and technological innovation and progress in the process of technical management on the construction site. I worked as a builder in Tang Hong Jiayuan No.1 staff residential building and Minshan World Building Phase II project. During the years of training in the front line of construction, the professional knowledge I learned in school quickly turned into business ability. As the technical and quality backbone of the company, under the direct leadership of the company manager and chief engineer, I am meticulous in technical management. After several years of hard work, I have acquired certain construction technical ability and experience. Since August xx, I have worked as a project builder in Mianyang Fuxiang Construction Development Co., Ltd. ..

Over the years, in the process of contributing to the development of on-site construction, my professional and technical ability has also been enriched and improved. In a word, I have done some useful work, but there are still many problems to be improved. Now I am interested in my professional and technical work.

Summarized as follows:

First, enhance quality awareness and create architectural products.

20xx worked in Mianyang Fuxiang Construction and Development Co., Ltd. as the builder of the second phase project of HKUST Garden North District. Engineering quality is the life of construction enterprises. In order to obtain good engineering quality, technical managers are required to have a good sense of excellence. As the project builder of this project, I will take the lead in establishing and perfecting the relevant technical and quality management rules and regulations of the project department. According to the project construction method, the project quality objectives are decomposed into various professional and technical posts, and then the construction is organized according to the requirements of technical posts. A series of management systems conducive to ensuring the project quality have been established successively, such as technical review system, project quality inspection system, hidden acceptance system, quality common fault control measures, semi-finished products protection measures and so on. According to the characteristics of large amount of excavation and concrete pouring in this project, the formwork support adopts the tool-type quick release system, and the glued bamboo formwork with film covering is used together to ensure that the gap of bamboo formwork is not more than 1mm and the surface flatness is not more than 2mm, which not only saves the cement consumption, but also completely eliminates the quality hidden danger of ceiling plastering, and realizes the double harvest of economic and social benefits. The surfaces of the tiles on the interior and exterior walls are smooth and clean, with the same color, dense joint filling, straightness and uniform width, and the details of the waterproof layer on the roof are carefully handled, consistent and beautiful. The surfaces of doors and windows should be clean, free from scratches and bumps, and the surface of wall paint should be smooth and even, with uniform thickness and no air holes. Straight line. In the process of construction, the construction shall be carried out in strict accordance with the design and construction drawings and the requirements of national specifications, procedures and general atlas, and various sub-projects shall be completed seriously. Achieved the quality goal of "high standard and high quality". Through the direct participation and control of the technical work of the project, the quality, progress and benefit of the project have received good results.

Two, study hard business technology, do a good job.

I have done well since I worked in Mianyang Fuxiang Construction Development Co., Ltd. in August of 20xx. Under the tight time and heavy task of this project, I voluntarily gave up my personal rest time and worked overtime without complaint, which fully reflected the due role of a young professional and technical personnel.

In my work as a project builder, I apply my professional knowledge to my work practice, from technical guidance and quality inspection and acceptance on the construction site to verification of technical data. I am serious and responsible in all my work, and the technical documents and various application materials formed in my work have been praised by relevant departments and leaders many times, winning honors for the enterprise. In the work, we can strictly manage, control the quality, and do our duty to ensure the quality, safety and progress of the project, which has been well received by the construction unit.

Third, adapt to the needs of the development of the times, keep learning and constantly update your knowledge.

The development of modern society is changing with each passing day, and knowledge is updated very quickly. If we don't add new knowledge in time and continue to learn and communicate, we can't meet the needs of enterprise technology management and will be eliminated. To this end, I take every opportunity to participate in various training courses and technical exchange activities. I have successively obtained the qualification certificates of construction engineer, quality inspector and safety officer. Through all kinds of savings for re-education and training, I have always maintained a strong thirst for knowledge, and at the same time my professional and technical level has been continuously improved.

The above is the main situation of my technical work. Through learning from books, learning from practice, learning from others, and combining my own analysis and thinking, I have indeed made great gains and progress. Achievements and shortcomings coexist, and experience and lessons go hand in hand. I will continue to work hard, learn lessons, overcome shortcomings, be modest and prudent, and do my work better.

Summary of Personal Work in Junior Professional Title Evaluation 2 Since I joined the company, I have worked hard and studied the theoretical knowledge of this major diligently, and I have grown from a pure scholar who just graduated from school to a professional with solid theory and rich practical experience. After becoming the shift supervisor, I began to improve my governance level and make myself a compound talent with both ability and political integrity, professional skills and governance ability.

In 20xx, I stopped my school life for four years and came to Qingdao with my professional training at school. Come to this place facing the sea and blooming in spring. I remember that at the graduation ceremony, the principal told us earnestly that "Shandong Electric Power School was founded in 58 years and trained more than 10,000 key talents for Shandong electric power system. It is precisely because our students can afford to go anywhere that they have won a great reputation for the school. " From then on, I secretly made up my mind that I must study more and practice diligently, and strive to become the technical backbone of the company as soon as possible, and prove myself with professional knowledge and reliable skills.

When I came to the company, it was the second year of its establishment. I remember that the heating range was very small at that time, and the company only had two boilers. However, the atmosphere of the company is very good, and leaders and colleagues take care of us, rely on us and have great hopes. In order to let us learn more professional knowledge, in June of 20xx, the company ordered us to go to Jinan Mingshui Thermal Power Plant for business training, mainly focusing on the operation skills of circulating fluidized bed boilers. Mingshui Thermal Power Plant is the training base of Jinan Steam Boiler Factory and one of the first places to run circulating fluidized bed steam boilers in China.

Mingshui Thermal Power Company has established a complete boiler theory and practice training system due to perennial external training. There are also specialized business people who explain theoretical knowledge to us, and we also put ourselves into practical work and participate in their operations. It laid a superior professional knowledge for me at that time. Lay a foundation for future practical work.

After stopping training for three months, I devoted myself to the preparation for the heating season in 2002-03 with great enthusiasm. At that time, I participated in the preparation of all boilers and systems, including external network water injection, boiler water injection pressure test, boiler combustion preparation and auxiliary engine trial operation.

It was particularly cold in winter that year, but we intervened in the heating operation with great enthusiasm. At that time, I mainly studied as usual, but under the supervision of the masters, the inspection and maintenance of auxiliary machines and the adjustment operation of boilers under normal conditions have been carried out.

The ignorance stage soon stopped, because we had a good knowledge reserve in the early stage, and soon adapted to the rhythm and basic skill operation of the work after entering the work.

By the heating season of 03-xx, we can do a lot of work. In the heating season that year, the No.3 boiler of our company was put into operation, and the No.4 boiler was also supported by important support, so I participated in the trial operation and debugging of No.3 road and learned a lot.

In 20xx, in order to further improve the operation level of heating and learn from others' operation skills and management methods, the company organized us to study in Weihai Broadcom Thermal Power Plant. After coming to Weihai, we also changed from the original learners to communicators. The training in Weihai gave me the biggest place, and I began to pay attention to the wear and tear of boilers. At the end of the training, I spent a long time discussing the wear and tear of circulating fluidized bed boilers. Including the anti-wear mechanism and leading structure effectively constructed by Ru 'an in the design. In addition, I began to pay attention to the actual effect of the air preheater and began to think about the wear and corruption of the air preheater.

The experience of these years proved my judgment at that time. Due to the aging of the boiler, the explosion of economizer and water wall has become the main problem of stable operation. The air preheater has also been transformed and replaced.

The main reason is the fly ash abrasion of economizer tube explosion, and the problem of air preheater is mostly low temperature corrosion, which is also a problem I want to study and solve in the future operation. Wear and corruption are inevitable, but we should slow down the process technically.

In xx, I was promoted from assistant to boiler chief operator and began to independently undertake the task of running a single boiler. The main operator will start to stop the boiler independently and complete the important operation of the boiler.

In 20xx, our company's 50mw circulating fluidized bed boiler was built, and I also participated in the debugging, because our first four boilers were 24mw low-temperature reflux circulating fluidized bed boilers produced by Taiyuan Boiler Factory. No.5 boiler is a high-temperature return boiler produced by Jinan Steam Boiler Factory, and we have no operating experience. But we still rely on solid theoretical knowledge to overcome hardships, successfully burn and win the heating season.

In xx, 20xx, I began to meet new challenges and became the shift supervisor of Class C. At this time, although my professional knowledge is mature and my theoretical knowledge is deepening, I have no experience in governance. I began to change from purely technical work to professional and management work. People are motivated by pressure and challenged by difficulties. I began to think that my knowledge was not enough. I used to be responsible for the operation of a single boiler, but now I have to consider the whole system. How to ensure the safe, economical and stable operation of the system?

Summary of Personal Work in Junior Professional Title Evaluation 3 Since I joined the company, I have worked hard and studied the theoretical knowledge of this major diligently, and I have grown from a pure scholar who just graduated from school to a professional with solid theory and rich practical experience. After becoming the shift supervisor, I began to improve my management level and make myself a compound talent with both ability and political integrity, professional skills and management ability.

In 20xx, I ended my four-year school life and came to Qingdao with my professional training at school. Come to this place facing the sea and blooming in spring. I remember that at the graduation ceremony, the principal told us earnestly that "Shandong Electric Power School was founded in 58 years and trained more than 10,000 key talents for Shandong electric power system. It is precisely because our students can afford to go anywhere that they have won a great reputation for the school. " From then on, I made up my mind to study more, practice diligently, strive to become the technical backbone of the company as soon as possible, and prove myself with professional knowledge and reliable technology.

When I came to the company, it was the second year of its establishment. I remember that the heating scale was very small at that time, and the company only had two boilers. However, the atmosphere of the company is very good, and leaders and colleagues take care of us and place great hopes on us. In order to let us learn more professional knowledge, in June of 20xx, the company arranged for us to go to Jinan Mingshui Thermal Power Plant for business training, mainly about the operation technology of circulating fluidized bed boilers. Mingshui Thermal Power Plant is the training base of Jinan Boiler Factory and one of the first places to run circulating fluidized bed boilers in China.

Mingshui Thermal Power Co., Ltd. has established a complete boiler theory and practice training system due to its perennial external training. There are also specialized business personnel to explain theoretical knowledge to us, and we also enter the actual work and participate in their operations. It laid a good professional knowledge for me at that time. Lay a foundation for future practical work.

After three months of training, I devoted myself with great enthusiasm to the preparation for the heating season in 2002-03. At that time, I participated in the preparation of all boilers and systems, including external network water injection, boiler water injection pressure test, boiler ignition preparation and auxiliary engine trial operation.

It was particularly cold in winter that year, but we participated in the heating operation with great enthusiasm. At that time, it was mainly in the learning stage, but under the supervision of the masters, the inspection and maintenance of auxiliary machines and the adjustment operation of boilers under normal conditions were carried out.

The stage of ignorance soon ended, because we had a good knowledge reserve in the early stage and quickly adapted to the work rhythm and basic technical operation when we entered the work.

By the heating season of 03-XX, we can finish a lot of work independently. In the heating season that year, No.3 boiler of our company was put into operation, and No.4 boiler was under intense construction, so I participated in the trial operation and debugging of No.3 road and learned a lot from it.

In 20xx, in order to further improve the operation level of heating and learn from other people's operation technology and management methods, the company organized us to study in Weihai Broadcom Thermal Power Plant. After coming to Weihai, we also changed from the initial learners to communicators. The training in Weihai gave me the biggest place, and I began to pay attention to the wear and tear of boilers. At the end of the training, I discussed the wear and tear of circulating fluidized bed boilers at a long length. Including the anti-wear mechanism and how to arrange the structure effectively in the design. In addition, I began to pay attention to the effectiveness of the air preheater and began to think about the wear and corrosion of the air preheater.

The experience of these years proved my judgment at that time. Due to the aging of the boiler, the explosion of economizer and water wall has become the main problem of stable operation. The air preheater has also started the overhaul and replacement stage.

The main reason is the fly ash abrasion of economizer tube explosion, and the problem of air preheater is largely low temperature corrosion, which is also a problem I want to study and solve in the future operation. Wear and corrosion are inevitable, but we should slow down this process technically.

In XX, I was promoted from assistant operator to boiler chief operator, and began to undertake the operation task of a single boiler independently. The main operator will start to stop the boiler independently and complete the important operation of the boiler.

In 20xx, our company's 50mw circulating fluidized bed boiler was built, and I also participated in the debugging, because our first four boilers were 24mw low-temperature circulating fluidized bed boilers produced by Taiyuan Boiler Factory. No.5 boiler is a high-temperature return boiler produced by Jinan Boiler Factory, and we have no operating experience. But we still rely on solid theoretical knowledge to overcome difficulties, successfully ignite and successfully spend that heating season.

In XX, 20xx, I began to meet new challenges and became the shift supervisor of Class C. At this time, although my professional knowledge is mature and my theoretical knowledge is deeper, I have no management experience. I began to change from purely technical work to professional and management work. Pressure motivates people, and difficulties challenge people. I'm beginning to feel that my knowledge is not enough. I used to be responsible for the operation of a single boiler, but now I have to consider the whole system. How to ensure the safe, economical and stable operation of the system?

Summary of Personal Work in Junior Professional Title Evaluation 4 I passed the teacher recruitment examination in June of 20xx and was assigned to teach in Sanhe Primary School. In this year and a half of teaching, I first taught mathematics and Chinese in Dajing Primary School, because there were few students, and many classes were used in grades. Later, under the arrangement of the school leaders, I taught first-grade mathematics and preschool Chinese in the central primary school. With the help of school leaders and colleagues, I have made great progress in my work. Now I will summarize my work since teaching as follows.

First, actively pursue ideological progress and constantly improve teachers' morality.

I am eager for ideological progress, love the socialist society, love the production party in China, be loyal to the party's education, love students, have a strong sense of professionalism and responsibility, pay attention to being a teacher, and actively improve my ideological and theoretical accomplishment and professional academic accomplishment. Since taking office, I have obeyed the arrangement of the school and conscientiously implemented the various systems of the school.

Second, do a good job in education and teaching, and strive to improve the quality of teaching.

The key to improving teaching quality is to have a good class. In order to have a good class, I have done the following work:

1, preparation before class: preparing lessons.

2. Study the textbook carefully, make clear the basic ideas, basic concepts, every sentence and word, understand the structure, key points and difficulties of the textbook, master the logic of knowledge, and be able to carry out the games.

Use it freely, know what information to add and how to teach it well.

3. Understand the quality of students' original knowledge and skills, students' interests, needs, methods and habits, and what difficulties they may have in learning new knowledge, and take corresponding preventive measures.

4. Consider teaching methods and solve how to teach students the textbooks they have mastered, including how to organize the textbooks and how to arrange the activities in each class.

5. The situation in the classroom. Organize classroom teaching, pay attention to all students, pay attention to information feedback, mobilize students' intentional attention, maintain its relative stability, stimulate students' emotions at the same time, make them have a happy mood, create a good classroom atmosphere, the classroom language is concise and clear, overcome the repeated problems in the past, ask questions to all students in class, pay attention to stimulate students' interest in learning mathematics, combine teaching with practice in class, assign homework, and reduce students' burden.

6. In order to improve the quality of teaching, we should also do a good job of after-school counseling. Primary school students love sports, are playful, lack self-control, often fail to finish their homework on time, and some students copy their homework. In order to solve this problem, we must do a good job in students' ideological education and use this work to guide students' learning, but we must also do a good job in counseling and helping students, especially in the transformation of underachievers, and strive to be friendly to underachievers. For example, from the beginning of praise, all people are eager to get the understanding and respect of others, so when talking with poor students, they express their deep understanding and respect for their situation and ideas.

7. Take an active part in lectures and class evaluation, learn teaching methods from peers with an open mind, learn from others and improve teaching level.

8. Love students, treat every student equally, and let them feel the care of teachers. Good teacher-student relationship promotes students' learning.

Third, do a good job as a class teacher and cultivate a new generation of talents.

The work of the class teacher is the work of the manager. The head teacher is faced with a group of students who are full of vigor, thinking, feeling and strong desire for self-expression. Therefore, the head teacher should have both macro group management and micro personality development guidance in his work. In class management, I also lead students to create colorful class culture, fully display their skills, develop their personality and cultivate their talents. Carry out colorful activities, entertain and educate, and let students actively develop themselves in the activities. At the same time, activities provide opportunities for each student to think, create, express and succeed. I also hold regular theme class meetings, organize knowledge contests, debate contests and speech contests. Make full use of blackboard newspaper, design praise column, display column, etc. Let students organize, manage and develop themselves. Cultivate students' practical ability through colorful activities.

Fourth, work hard and complete other work in the school.

In my spare time, I collect my reflections, cases and gains in teaching, record some of my work processes, life stories and ideological courses, screen and accumulate the information resources I need most, and actively communicate with other teachers on my blog to discuss the problems existing in teaching.

Fifth, strengthen reflection and sum up teaching gains and losses in time.

Reflecting on the work of this school year, I am thinking about my own shortcomings while making achievements. Disadvantages are as follows:

1, the theoretical research of mathematics teaching is not deep enough, which needs reflection and the teaching level is slow to improve.

2. The application of educational scientific research in teaching practice is not in place, and the research is not detailed and practical enough to reach my goal.

3. There are not enough unique and creative things in mathematics teaching, so we should try to find out some unique points in mathematics teaching in the future.

4, the work enthusiasm is not high enough, the initiative is not strong enough, and there is lazy thinking. This also needs to be further corrected and strengthened in future work.

Sixth, carry forward the past and open up new horizons.

In view of my performance in various aspects and many shortcomings in my work this school year, my future efforts are:

1, strengthen the training of their basic skills, especially the training of classroom teaching ability. Be precise and concise, and pay attention to the cultivation of students' ability.

Pay more attention, love and patience to the underachievers, so that they can make greater progress in all aspects.

3. Strengthen the education of students' behavior habits, so that students can not only concentrate on their studies in class, but also strictly restrain themselves after class.

4. Make great efforts in teaching and strive for greater progress in students' grades on the original basis. A Chunhua, An Qiushi, in this semester's work, I paid sweat and tears, but what I got was full and heavy emotions. Achievements belong to the past, and tomorrow has a long way to go. I deeply realize that as a people's teacher and an engineer of human soul in the new century, I shoulder a great historical mission and a sense of historical responsibility facing the future. As a young teacher just engaged in education, my growth can not be separated from the help and support of many tutors and friends. I will be deeply rooted in the fertile soil of education, diligent and down-to-earth, constantly absorbing nutrition, and strive to grow into a pillar of talent and realize the dream of peaches and plums all over the world.

Personal work summary of junior professional title evaluation 5 at the beginning of the new year, Vientiane is updated. Looking back on the work of 20xx, I strictly abide by the rules and regulations of the unit, unite my colleagues around me, care for each other at work, help each other in study, and actively demand progress politically. As a supervisor, I do my job well, study hard in business, strive for perfection, have a high sense of responsibility and a strong sense of professionalism in practical work, adhere to the principle of objectivity, fairness and seeking truth from facts, and continue to pay attention to my own technical learning. Personal technical level and working ability have been greatly improved. In the process of supervision, with strict work style and excellent technical level, it has been highly praised by the construction unit and maintained the reputation of the unit.

During the construction of the seventh standard of schistosomiasis control project in Gui Jiang, I kept paying attention to learning and accumulating all kinds of knowledge, constantly pressuring myself, assiduously studying business, learning new documents, actively participating in the knowledge training and learning of higher authorities, and further improving my professional level through theoretical study, which will be of better help to future supervision and quality management, and I will also be good at finding and studying problems in my work. I can handle difficult problems in supervision technology independently, have certain technical expertise and business ability, be proficient in national and local supervision technical specifications and standards, improve greatly in the process of practice and continuous learning, have a thorough understanding of supervision specifications and standards, and be proficient in engineering supervision. There are no major mistakes in the quality or technology of the project supervised by me. In order to improve the engineering quality in the specific supervision process, I often go to the supervision site of my brother units for on-the-spot observation, humbly ask for advice, try to master the first-hand information of supervision, and carefully read and learn the new norms and standards. In the usual work, in addition to doing my own job, I actively participate in the training and study of engineering supervision technology and quality, better enrich myself, adjust my knowledge structure, make up for the shortcomings in my work, and constantly recharge myself. I strictly ask myself to study the professional knowledge of engineering technology and quality, and consult my peers and experts humbly when I encounter problems I don't understand. I feel that if a person doesn't study, he won't make progress, and if he doesn't see his own shortcomings, he will fall behind the times. Today's society is a society of knowledge and information, and I deeply feel the important mission entrusted to us by history.

Since I was engaged in it, with my own continuous efforts, I have carried out on-site supervision in strict accordance with the requirements and norms of supervision. Strictly check the acceptance of materials and processes, and immediately rectify those that do not meet the quality requirements of supervision until the quality requirements are met. Achievements can only represent the past, and there is still a gap from the requirements of a qualified construction supervisor. I will take this as a starting point, strengthen the improvement of my comprehensive quality in all aspects, and be more strict with myself in my future work. I will continue to work hard, keep exploring and make progress, so as to become a qualified project construction supervisor and make due contributions to Yangzhou's economic construction.

In the process of supervision, I carried out supervision work on the principle of independence, fairness and science, and controlled the quality and progress before, during and after the event, which effectively ensured the quality of the project.

In the daily supervision work, always follow the following requirements:

1. Strictly control the quality of materials: after materials enter the site, they should be stacked in batches and specifications, check whether the quality assurance materials are complete, check whether the appearance quality meets the specification requirements, provide samples and materials as required to witness sampling, inspection and test, and agree to put them into use.

2. Strictly apply for inspection of good working procedures: the construction unit must apply for inspection every time it completes a working procedure. If the first inspection fails, it must be rectified. Only after passing the qualification can the next working procedure be constructed, especially the acceptance of concealed works. Concrete pouring is allowed when conditions permit, including inspection of mechanical equipment, personnel and materials, ratio measurement and water-cement ratio control. During pouring, patrol, stand by and supervise technicians to ensure quality, make pouring plan in advance, and strictly implement it after passing the examination.

3. Strictly control the safety: At every regular meeting, the supervision team "strictly implements the safety production regulations" and discovers potential safety hazards during supervision, and immediately informs the construction unit to make rectification, so as to ensure safety production and ensure that the project does not have safety production accidents.

4. Strictly control the engineering data and test blocks: the engineering data shall be synchronized with the progress of the project from commencement to completion, and the standard test blocks shall be maintained according to the specifications, and the test blocks shall be maintained under the same conditions, and witness sampling, inspection and test shall be carried out in time.

5. Strictly check the acceptance of the project: after the completion of the project, conduct the re-inspection of the completion survey, improve the project data, actively assist the construction unit to handle the handover work, and ensure that the construction unit and relevant departments are satisfied with the supervision project 100%.