Annual work summary of the safety and environmental protection department

It's almost the end of the year. When the safety and environmental protection department reflects on the work in the past year, it will find that some achievements have been made in the work, but there are also some problems. The following is the Annual Work Summary of the Safety and Environmental Protection Department compiled by me for your reference only. You are welcome to read it.

Annual Work Summary (1) The year of the Safety and Environmental Protection Department is about to pass. As an employee of the Safety and Environmental Protection Department, under the leadership of the company, I have successfully completed various tasks assigned by the company around the establishment and improvement of the management system, the declaration and approval of engineering projects, and my personal work skills have also been significantly improved.

I. The main work in 20xx is as follows

1, straighten out the procedures of safety assessment and EIA, and promote the process of safety assessment and EIA.

I am mainly responsible for the safety assessment and environmental assessment procedures of the Department of Safety and Environmental Protection. Since the Ministry of Safety and Environmental Protection was established not long ago, the relevant departments in the development zone have just been established, and a lot of work has not been involved, so the first task we face is how to straighten out the working procedures. Under the leadership of the company leaders, we walked diligently and asked many questions. By carefully studying the documents issued by the government and the procedures of relevant departments, a set of working procedures for handling relevant procedures step by step is groped and summarized, which is convenient for future work and improves the quality of work. At present, great progress has been made in safety assessment and environmental assessment.

2. Seriously study the documents issued by the superior, and assist in establishing and improving the company's safety and environmental protection system.

According to the requirements of relevant departments, this year the company began to accelerate the establishment and improvement of the factory management system. According to the instructions of the leaders and the actual situation of the factory, many regulations on safety and environmental protection were summarized and formulated. The establishment of these systems not only meets the inspection requirements of higher authorities, but also facilitates the management of our company.

3. Complete the inspection and rectification related work assigned by superior leaders on time.

As the company is a newly-built enterprise, the inspection and management of the company by various functional departments are strict. In the past year, under the guidance of company leaders, I completed the inspection of enterprise system and project procedures by superior departments. For the rectification opinions issued by the superior, I actively urge the rectification to be implemented, organize personnel to study and train, improve employees' safety awareness, and correct people or things that violate safety regulations. Through the rectification of hidden dangers, the smooth progress of safety production is effectively guaranteed.

4. Responsible for receiving, sorting and keeping documents issued by functional departments such as safety and environmental protection.

5. Set up the company's computer office network and complete computer maintenance and computer drawing.

Because of my personal hobbies, I taught myself cad drawing software in college, and my work after I joined the work has always been related to computers, so I gradually mastered some knowledge of computer maintenance. In 20xx, due to the office needs, the company bought several computers. At that time, few people in the company knew computers. I used my knowledge to complete the erection and daily maintenance of computer network, and I did most of the cad drawing work used in safety environmental assessment, factory design and workshop design.

6. Straighten out the workflow of the personnel department and complete the initial filing of the company's personnel electronic files.

In 20xx, the company's personnel were irregular, and I also managed the work of the personnel department. In order to facilitate management, I studied relevant knowledge, collected information from the Internet, found a set of free personnel management software, and established an electronic personnel file, which made personnel management procedural and orderly, and basically straightened out personnel management procedures.

Second, there are shortcomings.

Although the work in the past year has made some achievements, there are still some shortcomings, mainly the lack of ideological emancipation, the lack of organizational and communication skills, and a certain gap compared with experienced colleagues. Second, the work involved is diverse and complicated, and it takes time to study. Third, the work is not bold enough. We should change our working methods and constantly innovate and improve in the process of continuous learning. In my future work, I will conscientiously sum up my experience, overcome my shortcomings and strive to do better.

Third, the work plan for next year

1, study hard, strive to improve their own quality and work ability, and perform their duties as soon as possible.

2. Carry forward the spirit of hard work. Not afraid of hardship, take the initiative to find a job, be diligent in eyes, mouth, hands and legs, actively adapt to various environments, hone your will and increase your talents in complex work.

3. Carry forward the tireless enterprising spirit. Strengthen study, be brave in practice, pay attention to collecting all kinds of information while studying, and absorb all kinds of "nutrition" extensively; At the same time, pay attention to learning methods, correct learning attitude, improve learning efficiency, and strive to cultivate their solid theoretical foundation and practical work style. Try to do a better job and set up a good image.

4. Be a good assistant. Timely put forward reasonable suggestions and solutions for various decisions and problems for leaders' reference, and cooperate with department leaders to complete the tasks assigned by the company.

In short, over the past year, I have done some work and made some achievements, but there is still a certain gap from the requirements. I will constantly sum up experience, strengthen my study, update my ideas and improve my working ability in all aspects. Closely around the center of the company's work, with a highly responsible attitude towards work and career, down-to-earth, conscientious to do all the work.

Annual Work Summary of the Safety and Environmental Protection Department (II) The year of 20xx is a crucial year for the Safety and Environmental Protection Department to move from institutionalization to standardization and normalization, and it is also a transitional year for Century Qingshan to establish a closed-loop safety operation system of "everyone is responsible, everything has procedures, it is always controlled, there is assessment in the environment, there is a system of rewards and punishments, and defects are rectified".

Under the correct leadership of the company's leaders, with the strong support and active cooperation of workshop cadres and workers in various production departments, the work is mainly carried out around the safety objectives set at the beginning of the year, that is, the acceptance of "safety standardization" and "three simultaneities of environmental protection"; Adhere to "safety standardization" as the main line, improve the quality of safety environment and ensure the health and safety of employees as the starting point, and focus on improving the working system, supporting management measures, preventing special equipment and comprehensively sorting out the environment, so as to achieve the lowest accident rate since production and achieve the xx goal set by the company at the beginning of the year for the first time. The main safety and environmental protection work and working ideas of the Safety and Environmental Protection Department in 20xx are summarized as follows:

First, earnestly implement the responsibility system for production safety at the beginning of the year and sign the responsibility book for safety objectives at different levels.

Starting with strengthening the target management of safety responsibility, the Safety and Environmental Protection Department earnestly implements the assessment index system of safety production responsibility, and quantifies and refines the number of accidents, the number of injured people, personnel training, regular meeting system, team building, safety activities, reward and punishment range, etc., and comprehensively includes them in the target management of safety responsibility. At the beginning of the year, the safety responsibility system was signed with the xx department of the company, and it was required to be decomposed layer by layer. The production department is divided into xx workshop and xx team. By decomposing the annual safety work target layer by layer, and transmitting the work pressure, we can achieve "everyone bears the burden and everyone has indicators", so that everyone can really take indicators as the work target, pressure as the work motivation and responsibility as the work mission, and ensure the smooth development of the company's work throughout the year. There are 20xx people with minor injuries (including X people in the charging department, X people in the equipment department and X people in the nickel-iron factory), and the medical expenses for work-related injuries are xxx yuan. According to the number of employees on xx month and xx day, the industrial injury rate was controlled at xxx‰, which achieved the goal of industrial injury accident rate X set at the beginning of the year.

2. Deploy in advance and carry out work in an orderly manner as planned to ensure that safety and environmental accidents are controlled.

Adhere to the system of regular meetings on safety and environmental protection for x days every month, and summarize the safety and environmental protection work status of last month, such as accidents, hidden dangers rectification, compliance with safety and environmental protection rules and regulations of each unit, and notification of rewards and punishments. , and arrange the next month and the next stage of work. By calling the heads of various departments and workshops to hold regular safety and environmental protection meetings, we can find out the shortcomings in the work in time, correct the deviation in the safety and environmental protection work, correct the work performance objectives, reduce the possibility of accidents and ensure the orderly development of the follow-up work. Since the monthly meeting, the accidents at work have dropped from xx in 20xx to X in 20xx, and the accident rate has dropped by xx%. No environmental pollution accident occurred in 20xx years, no production was stopped or punished due to environmental pollution accident, and no environmental pollution was caused by illegal discharge.

Third, establish and improve the safety and environmental protection management system ledger, and constantly improve the effectiveness of the system.

In order to ensure the orderly development of safety and environmental protection work, the compliance and effectiveness of Century Qingshan safety and environmental protection system meet the use requirements. 10, formulated the environmental protection management regulations of xxx co., ltd. and the environmental protection reward and punishment system. 10, according to the requirements of the Technical Specification for the Record of Heavy Metal Pollution Reduction Accounts in the Twelfth Five-Year Plan of xxx Province, a heavy metal pollution reduction account was established. 10, according to the requirements of Occupational Health Records Management Standard, the occupational health records were re-improved. Through continuous improvement of the effectiveness of the system, the smooth progress of the acceptance work is ensured, and the annual supervision and audit of the X environment and occupational health and safety management system is successfully passed. 10-1110 establish and improve the company's hazardous waste management ledger, and formulate the management regulations for waste oil temporary storage places, emergency plans for waste oil leakage and the responsibility system for preventing and controlling environmental pollution by solid waste.

Fourth, strengthen daily safety inspections and deepen safety supervision.

According to the actual production of the company, the safety and environmental protection department carried out a safety inspection in view of the seasonality of the accident and the ideological fluctuation of the employees before the holiday. In 20xx years, safety inspections were carried out for x times before New Year's Day, Spring Festival, May Day, Mid-Autumn Festival and National Day, and xx items of potential safety hazards were investigated.

Around the weak links such as production technology, infrastructure, working environment, prevention and control measures, labor discipline, etc., especially during the emergency repair of submerged arc furnace, there are many cross-operation points, a wide range of high-risk operations, and a difficult site environment, etc., daily inspections and rectification of safety and environmental hazards are carried out. When problems are found, it is necessary to fix people, time and measures for rectification. Daily investigation of security risk xx. June 65438+ 10 to February 65438+February * * * Safety hazards rectification xx.

Through continuous safety inspection, the basic work level of Qingshan safety in the century has been improved, the accident prevention measures have been strengthened, and the hidden dangers of accidents have been eliminated or effectively monitored.

Five, strengthen equipment maintenance, improve workers' skills, and ensure the safety of equipment operation.

Since the company put into production for X years, many production equipments have entered a period of high incidence of aging and morbidity. In order to ensure the normal operation of equipment and the safety of operators, the daily safety inspection of equipment should be strengthened. In the middle of X, contact the technicians and workshop maintenance personnel of xxx crane company to change the main hoisting brake of the auxiliary hook of xx factory 140T crane from single braking to double braking. April-165438+1October urged the Equipment Department to contact the Municipal Quality Supervision Bureau for annual inspection of the company's special equipment. Arrange personnel to rectify the problems existing in the re-inspection, and at the same time require special equipment users to strengthen the daily inspection and maintenance of equipment parts and safety accessories to ensure the normal operation of the equipment.

In order to fully understand the certification of the company's special operations personnel, in xx, the company cooperated with various production departments to check the certificates of the company's special operations personnel, which basically met the certification requirements. At the same time, the company is required to recruit special operators to close the entrance in the future, and submit a copy of the certificate to the safety and environmental protection department for registration.

In view of the accident that the slag bin of xx submerged arc furnace fell off, the safety inspection was carried out on the equipment with frequent fault maintenance from June 5438+00 to June 65438+1October, especially on the equipment and facilities that were corroded due to the harsh production environment and shortened their service life, such as cable bridges and gas pipelines around the slag flushing circulating pool, which were included in the key investigation scope. Find the problem and ask the subordinate departments to repair and reinforce it in time. At the same time, the equipment inspection personnel are required to check one by one in strict accordance with the items listed in the equipment inspection table to ensure the safety of equipment operation and personnel operation and ensure the normal and orderly production.

Six, in view of the special climate and accidents, to carry out special safety inspections and activities.

In view of the smog weather in February, March, 1 1 and 65438+February, the air pressure is low, the smog dissipates slowly, and the air does not convection. The Safety & Environmental Protection Department arranges safety management personnel to monitor the gas escape area of the ferronickel plant in real time, and there must be more than X people during the field operation to ensure that the working environment of employees is in a controllable state.

In view of rainy and humid weather and high temperature and sweating weather, electric shock accidents are prone to occur. On ××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××

In view of the dry weather, the equipment and use of fire extinguishers, hoses and water guns equipped with fire boxes in the factory area were investigated in X and xx, and the fire extinguishers were replaced in time to ensure the availability of fire-fighting equipment in an emergency.

With the arrival of high temperature weather in May, in order to prevent and control high temperature heatstroke, we should buy ten drops of medicine, Ren Dan, glucose and so on, prepare high temperature heatstroke medicine, and do a good job in heatstroke prevention and cooling from health care measures.

In X month, in view of the drowning accident of xxx technicians, the Safety and Environmental Protection Department conducted a special safety investigation on the hidden dangers of the company's slag flushing pool, protective railings of the circulating pool working platform, on-site potholes, drowning emergency equipment and so on. , and has asked the Ministry of Water Resources to rectify the problems found on the spot.

In view of the xx accident, a special inspection was conducted on the standardized operation of maintenance personnel, spare parts placement, on-site working environment, storage of inflammable and explosive articles, and fire-fighting equipment in the garage of XX Factory.

1 1-65438+ February is prone to work-related accidents because of sleeping at night. Arrange the security administrator to check the labor discipline at night, give priority to xx discovery education, and distribute it at least X times.

Now the evaluation begins. From the X-th spot check, dozens of people were found to be in violation of discipline, and then several times later, even no violation of discipline was found, which further improved the production efficiency of night shift and ensured the safety and zero accidents of night shift.

By carrying out a series of special safety inspection activities, some potential problems and weak links can be found in time. Formulate effective prevention and control measures for the problems found in time, and conduct investigation, governance and rectification. Make managers have a sense of urgency from the heart, more clearly understand and see the shortcomings and omissions in their work, and always keep an empty cup mentality of being prepared for danger in times of peace and preventing problems before they happen; Improve the company's safety production situation, truly nip in the bud and put an end to all kinds of safety accidents.

Seven, strengthen safety and environmental protection training, improve safety and environmental awareness, and create a safety and environmental protection atmosphere.

From June 65438+ 10 to February 65438+2, the Safety and Environmental Protection Department conducted company-level safety training for xx employees who entered the factory, transferred to other posts and returned to work after a long holiday.

On xx, xx organized xx management personnel above the monitor of each production department to attend fire safety training in crowded places in xx City Fire Bureau.

In order to create a good safety atmosphere in the safety month, combined with the actual situation of various production departments, some safety picture books, CDs and other educational materials were purchased and distributed to all departments, making full use of pre-shift activities, organizing employees in various positions to learn educational materials, and improving safety awareness and self-protection awareness.

On X month, X day, the director expert of xx Hospital of Traditional Chinese Medicine was invited to give a lecture on first-aid knowledge of work-related injuries, and xx people participated. In July, the Safety and Environmental Protection Department applied for a computer-based CPR simulator, requiring all employees to design according to the standard of CPR, to simulate whether the airway is unobstructed, whether the position and intensity of chest compressions are correct, whether the tidal volume blown out by artificial respiration is sufficient, and whether employees can learn CPR conveniently, effectively and quickly through correct and wrong operating language prompts. Improve the first-aid awareness and ability of company employees through first-aid training for work-related injuries.

In order to enhance the company's drivers' traffic safety awareness and legal concept, and learn to protect themselves and drive in a civilized way, xx people were organized to attend the road traffic safety knowledge lecture on xx days.

Annual Work Summary of the Safety and Environmental Protection Department (III) In 20xx, under the direct leadership of the general manager, the managers of all departments always put safety in production in the first place, conscientiously implemented the safety work policy of "safety first, prevention first and comprehensive treatment", and basically completed the work plan for safety in production formulated at the beginning of the year. However, there are still some seemingly simple and seemingly uncomplicated hidden dangers that have not been completely eradicated, such as leakage in production and employees' habitual violations. These security risks are constantly emerging. We believe that the reason is that some employees are not serious about safety in production and need to continuously strengthen training and education. Looking back this year, our safety management has mainly done the following work:

First, clear safety objectives and implement safety responsibilities.

In 20xx, the safety production target set by the company at the beginning of the year was basically completed: serious accidents were zero; The incidence of occupational diseases is zero; No death, serious injury or poisoning accident; There were 7 minor injuries and general accidents, one of which was a traffic accident. Major pollution accidents are zero. In order to strengthen the organization and leadership of safety production and strengthen the management of safety production, at the beginning of the year, the Safety and Environmental Protection Department signed a responsibility letter for the management of safety production objectives with all departments, teams and employees of the company, which refined and quantified the safety objectives layer by layer and implemented them for everyone. The responsibility book for safety production was signed to all employees, and the signing rate was 100%. Form a safety management system in which leaders are in charge and all departments and team leaders are mainly responsible.

Second, strengthen environmental protection, and strive to complete the "three wastes" treatment target issued by the environmental protection bureau of the bonded area before the end of the year.

In view of the strong odor around the factory and poor exhaust gas collection effect, the company concentrated on recycling the sampling vent valve in the synthesis section, which not only recovered the solvent, but also effectively reduced the exhaust gas emission concentration. Solid waste treatment Because the original xx Greer Industrial Solid Waste Disposal Co., Ltd. could not treat distillation residue, we contacted xx XXX Co., Ltd. in XX month to sign a hazardous waste disposal contract. At the end of xx, we signed a contract with xx Co., Ltd. and xxx Branch to install an online monitoring system for rainwater discharge. According to the requirements of the Environmental Protection Bureau, establish relevant accounts and files of waste water, waste gas and solid waste for better management.

Third, safety training and safety education

In order to fully implement the safety work policy of "safety first, prevention first and comprehensive treatment", safety education and training for employees were strengthened in 20xx.

1, organize "three-level" safety education for new employees, from national laws and regulations and company rules and regulations to workshop site management, labor discipline implementation and safety operation procedures training, and train new employees xx times throughout the year; Strengthen the safety training for front-line employees in production, and basically train them in rotation once a month, instilling them with the knowledge of safety in production, so that they can realize the importance of safety in production in essence. At the beginning of the year, a safety training plan was formulated, and xx people were trained and assessed throughout the year, with a pass rate of 100%. For those who enter the factory for construction, the outsourcing personnel sign a safety construction agreement with them, and train the construction personnel on safety knowledge before taking up their posts, with a total of X people trained throughout the year.

2.6 During the month of safety production, actively carry out safety production activities. Through posting brochures and safety knowledge training, employees have deepened their understanding of safety work and achieved certain results.

3. The Safety & Environment Department of the company has made an emergency rescue drill plan for fire accidents of dangerous chemicals, and conducted an emergency rescue drill for fire accidents in 10, which not only taught employees emergency rescue methods, but also enabled employees to learn how to use fire-fighting equipment correctly, and achieved good results. All employees took part in the exercise.

4. Security check

1, safety inspection is the main means to eliminate hidden dangers of accidents. In 20xx years, * * * organizes various factory-level safety inspections for xx times, and the Safety and Environmental Protection Department organizes relevant departments to conduct a major safety inspection once a week. The personnel of the Safety and Environmental Protection Department shall conduct on-site inspection every day and hold a safety production meeting once a week to timely rectify the hidden dangers of accidents found in the inspection and specify the completion time of the rectification. 20xx * * *, found all kinds of hidden dangers of accidents, and invested xx million yuan in rectification, effectively avoiding all kinds of accidents.

2. In order to implement the company's rules and regulations and improve employees' awareness of safety in production, the Safety and Environmental Protection Department organizes the administration department, production department and other relevant departments to patrol their posts at night, not less than 1 time per week and not less than x times per month, and investigate and deal with xx people who violate the rules, and make punishment and education respectively.

5. Investment in safety production and environmental protection facilities

1, 20xx years, the company purchased xx person-times of safety production liability insurance, with a total cost of xxx yuan;

2, the total cost of fire equipment purchase and maintenance of xxx yuan;

3, lightning protection facilities inspection fee xxx yuan;

4. Buy xx walkie-talkie at a cost of xxx yuan;

5, employee medical expenses xxx yuan;

6, all kinds of labor protection articles xxx yuan.

7. The on-line detection device for rainwater discharge is expected to be xxx yuan.

To sum up, in the past year, the Safety and Environmental Protection Department and relevant departments have done a lot of work in safety and environmental protection, ensuring the smooth progress of various production activities of the company and achieving certain results. However, there are still some problems, such as employees' habitual violation of regulations, poor quality of individual employees, poor management and poor safety awareness, which need our special attention in the new year and must not be sloppy. Looking forward to 20xx, we will continue to consolidate our achievements, conscientiously do our own work, implement the safety work policy of "safety first, prevention first and comprehensive treatment", and focus on the following work in the new year:

1, fully implement the responsibility system for production safety, sign the responsibility book for production safety in 20xx year by year, and earnestly implement the safety management system. Every front-line employee shall purchase safety production liability insurance.

2. Further strengthen the safety knowledge training for new and old employees and consolidate their safety awareness.

3. Continue to deepen the special rectification of hidden dangers of production accidents, further promote the standardized management of safety sites, organize regular safety inspections, strengthen on-site inspections, and nip hidden dangers of accidents in the bud.

4. Strengthen the management of accident emergency rescue, conduct safety training for all employees according to the responsibilities and requirements of emergency rescue plan, and organize 1-2 emergency rescue drills for hazardous chemical leakage and fire accidents.

5. Do a good job in employee occupational health monitoring, organize regular occupational health checkups, improve employee occupational health files and health monitoring files, and put an end to occupational diseases.

6, continue to do a good job of "three wastes" treatment, put an end to environmental accidents.

Safety work is a hard and long-term task, which needs to be completed by everyone. Only when everyone has a sense of safety in production and forms a self-protection mechanism can we effectively prevent accidents in production and better promote the smooth progress of production.