Workshop Director Safety Responsibility Letter

Workshop Director Safety Responsibility Letter (7 articles)

As society continues to progress, the responsibility letter plays an increasingly important role. The responsibility letter states the scope of responsibility and responsibilities. , mostly used in parallel documents. I am sure that most people have a headache in drafting a responsibility letter. Below is a workshop director safety responsibility letter that I have collected for everyone for your reference. I hope it can help friends in need.

Workshop Director Safety Responsibility Letter 1

In order to effectively implement the "Safety Production Law", adhere to the policy of "safety first, prevention first, comprehensive management", clarify responsibilities, prevent Accidents, to ensure the company's safe production and the safety of employees, mechanical equipment and materials, combined with the company's actual situation, specially formulated this year's safety production responsibility letter:

1. Safety production control indicators:

1. No serious injuries or deaths.

2. The incidence rate of minor injury accidents shall not exceed 0.1%.

3. No major criminal cases occurred.

4. No fire accident occurred.

5. There are no major theft accidents, equipment liability accidents, or explosion accidents.

2. Responsibilities of the Responsible Person:

1. Implement the principles of “Managing production must manage safety” and “Everyone is responsible for production safety”. Plan, arrange, inspect, summarize, and evaluate safety while planning, arranging, inspecting, summarizing, and evaluating production.

2. Perform various responsibilities, ensure the completion of various measures, conduct regular safety inspections, promptly rectify potential safety hazards, and report the rectification information to the company's safety department in a timely manner.

3. Carry out three-level safety education and safety technical training for special operations personnel. Resolutely put an end to the "three violations (illegal operations, illegal command, and violation of labor disciplines)". Once various safety accidents occur, the site must be protected, reported to the relevant leaders immediately, and dealt with seriously in accordance with the principle of "three no-leaks" .

4. All responsible persons should improve their own safety literacy and gradually enhance the safety awareness of all personnel in the department.

5. The person in charge of each department must implement production safety at every level, down to every employee.

3. Measures:

1. Timely revise the relevant safety production work requirements, deploy the department’s safety production tasks, and supervise the completion of relevant safety production and operation indicators.

2. Organize the department to conduct safety production inspections in a timely manner, keep inspection records, and instruct all responsible persons to rectify safety hazards and solve some major problems in safety production.

3. Do a good job in summarizing and promoting the safety production experience of responsible departments and commending advanced ones.

IV. Assessment methods:

1. The deadline is from year, month, day to year, month, day.

2. The responsible person shall make a written report on the completion of various indicators of the department to the company's supervisor in the middle of every six months, and send a copy to the safety department.

3. The annual assessment is organized by the company to inspect and evaluate the completion of indicators and operations of the responsible person (department).

4. In line with the principle of "whoever is in charge, whoever is responsible", if the job of the signer of the responsibility letter changes, the successor will be the natural signer.

5. Rewards and penalties: The company conducts assessments based on the safety production responsibility indicators completed by responsible persons at the end of the year. Those responsible for outstanding performance of safety production indicators will be rewarded, and those responsible for serious dereliction of duty and safety accidents will be punished depending on the loss and held accountable.

This responsibility letter is signed once a year in triplicate and takes effect from the date of signing.

Company person in charge (signature): Department person in charge (signature):

Year, month, year, month, day, workshop director safety responsibility letter 2

According to "China According to the "Work Safety Law of the People's Republic of China and the People's Republic of China", in order to ensure the implementation of the company's production safety, a safety production responsibility system has been established. The responsibilities for the safety production of this position are clearly defined as follows:

Boiler Workshop Director He is the first person responsible for safety production in this workshop and takes full responsibility for safety production in this workshop.

1. Promote and implement the laws, regulations, policies, systems and work requirements of superior departments and the company regarding production safety, environmental protection, and public security, and conscientiously implement and deploy various safety work.

2. Combined with the actual situation of this workshop, sign a safety responsibility letter with each section to implement the safety production responsibility system.

3. Inspect and urge employees in this workshop to consciously perform their safety responsibilities during production and work, strictly implement safety operating procedures, and ensure that they do not violate rules or disciplines.

4. Conduct regular safety inspections in the workshop, promptly implement rectifications of discovered safety hazards, and promptly take corresponding measures for those that are unable to rectify and report to the manufacturing department.

5. Actively complete the rectification of hidden accident hazards assigned by the manufacturing department on time.

6. Report all types of accidents in a timely manner and actively cooperate with the investigation and handling of hidden dangers in accidents.

7. Regularly hold regular workshop safety production meetings to study the safety production situation in the workshop, organize and carry out safety production activities, and apply advanced safety technology and management methods.

8. Organize regular and irregular safety inspections at the workshop level to ensure that equipment, safety protection devices, and protective facilities are in good condition, and rectify hidden dangers in a timely manner. If the workshop is unable to rectify, it must take temporary emergency safety measures and promptly Report to the company in writing.

9. Organize or participate in on-site protection, investigation and handling of various accidents in the workshop, and report them in a timely manner as required.

10. Responsible for the daily safety education and operational skills training of employees in the workshop, organize and implement workshop-level safety education, supervise and supervise the inspection of section and team-level safety education, and conduct regular assessments.

11. Frequently check the implementation of the safety production management system in this workshop, resolutely stop violations of rules and disciplines, and ensure that you do not give orders in violation of rules.

12. When there is a conflict between production and safety, production must obey safety.

13. Responsible for formulating safety technical measures in the workshop and implementing the safety production responsibility system in the workshop.

14. Carry out safety education and training in a planned manner to continuously enhance employees’ safety awareness and self-protection capabilities.

15. Regularly organize safety inspections, and take active measures to rectify and prevent potential accident hazards and unsafe factors to ensure the safe operation of production.

16. Organize the safety work of our company's major, medium and minor electrical repairs, formulate corresponding safety inspection plans, and strictly follow the operating procedures.

17. Manage the company’s electrical equipment and facilities well, conduct regular maintenance and inspections to ensure their reliable performance and intactness, and eliminate fire hazards in a timely manner.

18. For accidents that occur in the workshop, we must carefully organize investigations according to the principle of "four no-misses", analyze and identify the causes in a timely manner, formulate prevention and improvement measures, and report them.

19. Severe electric burns and fatal accidents are zero. Substation power outage accidents are <0.5 times/year, and major accident losses are zero. The second and third level education and training rate and pass rate reached 100% respectively, and the accident hazard rectification rate reached 100%.

20. The employment rate of employees with certificates is 100%, the "three-level" safety education rate is 100%, and the safety facilities and electrical equipment integrity rate is more than 95%.

This responsibility letter will take effect upon signature. The person responsible for safety production has understood the above safety production responsibility requirements and promised to be responsible for safety accidents in the management area. If a safety accident occurs due to poor management, Willing to assume corresponding legal responsibilities.

1. For those who neglect their duties or work irresponsibly and cause certain consequences, the company will deal with them seriously according to the severity of the case until they are held criminally responsible.

2. If major safety hazards in the area cannot be rectified in time or cause major safety accidents due to poor management, the relevant responsible personnel shall be punished in accordance with the State Council's "Provisions on Administrative Liability for Extraordinary Safety Accidents" and "Production Safety" Administrative sanctions will be imposed according to the relevant provisions of the Law; if a crime is constituted, criminal liability will be pursued in accordance with the law.

3. This responsibility letter is valid for one year

Signature of the enterprise legal person (official seal):

Responsible person: Workshop Director Safety Responsibility Letter 3

As the first person responsible for the blast furnace workshop, we must ensure the safety of employees in each position during the production process, ensure the safety of equipment during normal operation, and reduce human-made accidents. I solemnly promise at work:

1. Conscientiously implement the relevant national and superior production safety regulations, systems, and operating procedures, implement production safety technical operating procedures, and strictly guard against the "three violations" (illegal command, illegal operation, Violate labor discipline) and achieve "three no harms" (do not harm yourself, do not harm others, and do not be harmed by others).

2. Responsible for communicating, implementing, and executing various production safety plans, rules and regulations, rectification plans, etc. issued by the company. Based on the actual situation of the workshop with many dangerous factors, formulate safety management regulations, safety production operating systems and safety technical measure plans for each position.

3. Conduct workshop safety education and team safety education for new employees on the 5th and 15th of every month. Provide regular safety thought, safety awareness and safety technology education to employees, organize assessments at the end of the month, and actively participate in various safety activities organized by the company.

4. Strictly implement the company’s distribution and use standards for labor protection supplies, heat-relieving drinking water and other matters, strengthen the management of safety protection equipment, keep them properly and use them correctly.

5. Adhere to the "four no-misses" principle for accidents in the workshop (when investigating and handling work-related accidents, we must insist on not letting go if the cause of the accident is unclear, and we must not let go if the person responsible for the accident and the masses have not been educated. , Failure to take practical preventive measures will not be spared, and the person responsible for the accident will not be punished). If an emergency occurs, report it to the leader in charge and the Safety Supervision Department as soon as possible and actively deal with it, find out the cause, and take preventive measures.

6. Be familiar with the unsafe factors of each position in the workshop, promptly remind on-the-job personnel of the precautions, immediately rectify the discovered safety hazards, and report major hazards to the leaders in charge and relevant departments for resolution in a timely manner. Don't conceal or report, otherwise you will be responsible for the consequences.

7. Organize each team leader to conduct a safety production inspection on the 10th of every month, identify potential accident hazards in the operation of safety facilities and equipment at each position, and report to superiors in a timely manner to take corrective measures.

8. On the 6th and 16th of every month, organize the team leaders of the workshop to conduct general accident investigations, assign qualified safety management personnel for each class and group, and formulate relevant safety management systems to achieve safe production Institutionalization and standardization.

9. Be familiar with the operation of all equipment of various types of work in the workshop, master the production skills of employees, regularly strengthen training and education for workers, improve employee quality, improve their safety awareness, and improve their ability to prevent unexpected accidents disposal capabilities to ensure personal safety and equipment safety.

10. Organize the workshop class and team leaders to hold a regular safety production meeting at 8:30 every morning to summarize and analyze the safety production situation. Never shirk responsibility or delay the resolution of any small matter.

11. If an accident occurs due to your illegal command, illegal operation, violation of labor discipline or violation of the above commitments, you are willing to accept the following punishments from the company or superiors:

1. Because of your own If general burns, scalds, cramps, bruises, falls, crushes, mild gas poisoning and other minor injuries caused by illegal command, we are willing to accept a fine of 20% of this month's salary.

2. If a serious injury or disability occurs due to illegal command, a fine of 30% to 50% of this month's salary will be accepted.

3. If a major accident occurs, accept the veto of this month’s salary and wait for the company to handle it.

Leader in charge xx Workshop Director xx

Deputy Director xx

Workshop Director Safety Responsibility Letter 4 in May 20xx

For Further implement the safety policy of "safety first, prevention first", comprehensively implement safety precautions, prevent various accidents, maintain the normal order of safe production throughout the company, and ensure the safety of employees and company property, according to all levels In accordance with the principle of the executive head responsibility system, the manufacturing director and the workshop leader sign the following safety responsibility letter. Moreover, the completion of each goal in this responsibility letter will be one of the main basis for the year-end performance appraisal.

1. Annual goals

1. There will be no serious or serious accidents throughout the year, and the accident mortality rate will be zero.

2. No more than two general production liability accidents (direct economic loss of 500 to 10,000 yuan).

3. There should be no more than one general equipment liability accident (equipment spare parts are damaged, the repair cost is 500 to 5,000 yuan, or does not affect the production of the day by 5 to 25%).

4. There shall be no more than one minor accident (direct economic loss less than 500 yuan) (including near misses).

5. The annual losses from various types of accidents are controlled to less than 3.5% of the output value of the work section.

6. The rate of minor work-related injuries should be controlled below 2%.

7. No poisoning accidents, traffic accidents and criminal cases will occur.

8. No environmental accidents will occur.

2. Responsibilities

In order to achieve the above goals, the workshop must take effective measures and conscientiously perform the following responsibilities:

1. In order to publicize and implement the policies of superior departments and companies, The Manufacturing Department conscientiously implements and deploys various safety work in accordance with the laws, regulations, policies, systems and work requirements regarding production safety, environmental protection, and public security.

2. Combined with the actual situation of this workshop, sign a safety responsibility letter with each section to implement the safety production responsibility system.

3. Inspect and supervise the work sections of this workshop to consciously perform their safety responsibilities during production and work, strictly implement safety operating procedures, and ensure that they do not violate rules or disciplines.

4. Conduct regular safety inspections in the workshop, promptly implement rectifications of discovered safety hazards, and promptly take corresponding measures for those that are unable to rectify and report to the manufacturing department.

5. Actively complete the rectification of hidden accident hazards assigned by the manufacturing department on time.

6. Report all types of accidents in a timely manner and actively cooperate with the investigation and handling of hidden dangers in accidents.

7. Regularly hold regular workshop safety production meetings to study the safety production situation in the workshop, organize and carry out safety production activities, and apply advanced safety technology and management methods.

8. Organize regular and irregular safety inspections at the workshop level to ensure that equipment, safety protection devices, and protective facilities are in good condition. If hidden dangers are discovered, they should be rectified in a timely manner. If the workshop is unable to rectify, temporary emergency safety measures must be taken to promptly Report to the company in writing.

9. Organize or participate in on-site protection, investigation and handling of various accidents in the workshop, and report them in a timely manner as required.

10. Responsible for the daily safety education and operational skills training of employees in the workshop, organize and implement workshop-level safety education, supervise the inspection of section and team-level safety education, and conduct regular assessments.

11. Frequently check the implementation of the safety production management system in this workshop, resolutely stop violations of regulations and disciplines, and ensure that you do not give orders in violation of regulations.

12. When there is a conflict between production and safety, production must obey safety.

3. Assessment

1. The assessment period is from January 1, 20xx to December 31, 20xx.

2. The annual assessment adopts a hundred-point system, in which: safety responsibility accounts for 60 points and accident responsibility accounts for 40 points. The manufacturing department will assess and score the completion of the section indicators.

3. When the responsible person or signatory changes during the current year, the successor shall be the responsible signatory.

IV. Rewards and Punishments

1. The Manufacturing Department will allocate special funds to award those responsible for the safety of the construction section who meet the annual assessment standards, perform outstanding safety work, and score more than 90 points in the assessment .

2. According to the principle of who is in charge, who is responsible, if various accidents occur in this section, the manager of the section will be held accountable, and the penalty will be 20% of the amount handled.

3. For serious dereliction of duty that causes serious accidents in this section, write down written inspection materials, identify the reasons, and hold the responsible person accountable.

This responsibility letter is signed once a year in duplicate, with the section leader and workshop director each holding one copy.

xxx

Workshop Director Safety Responsibility Letter 5 on xx, xx, 20xx

As the person in charge of the machine repair workshop, he is the first person responsible for safety production. In order to Be responsible for the safety of the company and employees in this workshop, guarantee and solemnly promise:

1. Ensure that national and superior safety production regulations, systems, and operating procedures are implemented in this workshop, and put safety work on the agenda, Strictly guard against "three violations" and achieve "three no harms".

2. Responsible for conveying, implementing and executing all relevant production safety plans, rules and regulations and implementation plans issued by the company.

3. Organize workshop safety education and team safety education for new employees, and actively participate in various safety activities organized by the company.

4. Organize the workshop team leader or some employees to conduct regular safety inspections to ensure that equipment, safety devices, fire protection, protective equipment, etc. are in good condition.

5. Strictly implement the relevant standards for the use of labor protection supplies, strengthen the management of protective equipment, and educate employees to keep it properly and use it correctly.

6. Be familiar with the unsafe factors and unstable mental state of employees in the unit, and ask employees on the job to pay attention at any time. If safety hazards are discovered, they should be rectified immediately, and those that cannot be rectified should be reported to the leader in charge for disposal.

7. Be familiar with the operation of the equipment, understand the employees’ ideological trends, living conditions and production skills, take timely measures to solve the problems, nip all safety accidents in the bud, and ensure personal safety and equipment safety.

8. Organize team leaders to hold regular production safety meetings every Monday, Wednesday, and Friday to praise those who are advanced and warn those who are lagging behind.

9. If an accident occurs due to illegal command, illegal operation, violation of labor disciplines or violation of the above commitments, I am willing to accept the following penalties from the company:

1. General burns, For scalds, burns, cramps, bruises, falls, crushes, mild gas poisoning and other general liability accidents, we are willing to accept a fine of 50% of this month's salary; 2. Serious injury or disability accidents due to illegal command, Willing to accept all fines from the company. 3. If a major accident occurs, you will be fined for vetoing the monthly salary and will be dealt with by the relevant superior department.

Leader in charge xx Machine Maintenance Director xx

Workshop Director Safety Responsibility Letter 6, May 2012

According to the "People's Democratic Republic of China and National Security Production Law", in order to ensure the implementation of the company's safe production, a safety production responsibility system has been established for this purpose. The responsibilities for the safety production of this position are clearly defined as follows:

1. Assist the production supervisor to fully manage the production department Safety work, specifically implement the relevant national laws and regulations on production safety and the company's production safety system, and take full responsibility for the safety and health of workshop production employees in production.

2. Be familiar with relevant occupational safety laws, regulations and standards, be familiar with the content and requirements of the safety management system, and ensure that the production process complies with safety-related laws, regulations and standards.

3. Participate in the formulation of safety operating procedures for each position in the production workshop, participate in the formulation and implementation of equipment safety operating procedures and production process technical regulations.

4. Direct production in strict accordance with the production safety management system and safe operating procedures, and eliminate all behaviors that ignore production safety, neglect duties, violate regulations, and violate regulations.

5. While formulating the production plan, plan safety work and supervise the implementation. Regularly educate employees on labor discipline, rules and regulations, safety knowledge, and operating techniques.

6. Adhere to the system of holding certificates for special operations personnel. Special circumstances must undergo training and assessment, and be reported to the factory manager and deputy factory manager for authorization before they can operate independently. Provide on-the-job safety education and operational training to new employees and transferred employees, and keep records of training disciplines.

7. Frequently inspect the production equipment, tools and safety facilities at the workplace in the workshop, organize and organize the workplace, and eliminate hidden dangers in a timely manner.

8. Ensure the normal operation of the fire protection equipment system, implement the fire protection responsibility system, and achieve an organic combination of civil defense and technical defense.

9. Educate and urge employees to wear personal protective equipment according to the characteristics of each job type. Those with dust hazards must wear protective masks or gas masks. Smoking is prohibited in the production area, and eating food is prohibited in the production site. Supervise Carry out environmental cleaning work in the production area.

10. Organize and implement employee safety education, safety training and regular safety meetings effectively, ensure the time for safety education and training, and actively participate.

11. When work-related injuries, equipment accidents or near misses occur, they should be reported promptly and truthfully to the general manager and the safety department, organize rescue operations, protect the site, assist the safety department in investigating and handling the accident, and Develop improvement measures.

12. Implement the pre-shift meeting of the production team, regularly organize and hold weekly workshop safety production meetings, organize team safety activities, support the work of the safety department, and solve the problems raised in a timely manner, or in accordance with the prescribed authority Report.

13. Actively participate in and lead subordinates to participate in safety training and activities

General Manager: Production Assistant:

Year Month Day Year Month Day Workshop Director Safety Responsibility Letter 7

In order to conscientiously carry out the safety production work in our workshop in 20xx and ensure the safety of life and property in our workshop and all employees, in accordance with the "Work Safety Law of the People's Republic of China" and other relevant In accordance with the requirements of laws and regulations on production safety, in accordance with the principle of "one level of supervision, one level of responsibility for the first level", the workshop director and the team leader signed the following safety target responsibility letter.

1. Work Goals

1. Zero serious casualties.

2. There are zero major fire accidents.

3. There are zero major explosion accidents.

4. There are zero major traffic accidents.

5. There are zero major production accidents.

6. There are zero major equipment accidents.

7. The emission of "three wastes" meets national standards, and there are zero major pollution accidents and major pollution accidents.

8. There are zero acute poisoning accidents involving multiple people.

9. The minor injury rate is less than 3‰.

10. Minimize general accidents, and the rectification rate of safety hazards reaches 100%.

11. The working and living environment of employees complies with various industrial hygiene standards stipulated in national laws and regulations.

2. Responsibilities

1. Implement the instructions and requirements of the company and the workshop on safety production, and be fully responsible for the safety production of this section (team).

2. Organize employees to learn and implement various safety production regulations and safety technical operating procedures of the company and workshops, educate employees to abide by regulations and disciplines, and stop violations.

3. Organize and participate in safety activities, insist on talking about safety before class, checking safety during class, and summarizing safety after class.

4. Responsible for providing on-the-job safety education to new workers (including interns and accompanying personnel).

5. Responsible for the safety inspection of the team, organize efforts to eliminate unsafe factors in a timely manner, and report to superiors. Report accidents immediately, organize rescue operations, protect the scene, keep detailed records, participate in accident investigation and analysis, and implement crime prevention measures.

6. Carry out inspection and maintenance of production equipment, safety equipment, fire-fighting facilities, protective equipment and first-aid equipment to keep them in good condition and operating normally. Supervise and educate employees on the rational use of labor protection supplies and appliances, and the correct use of fire extinguishing equipment.

7. Do a good job in safety production competition among teams and groups, be advanced in performance and sum up experience.

8. Do a good job in team building and improve team management levels. Keep the production site neat and clean, achieve civilized production, and do a good job in the ideological and political work of the team.

3. Assessment

If an accident occurs, the assessment will be carried out in accordance with the company's accident management regulations and safety management assessment standards; if it causes serious consequences and constitutes a crime, corresponding administrative sanctions will be given and handed over. The judicial authorities will handle it.

IV. Supplementary Provisions

1. This letter of responsibility is valid for one year, that is: January 1, 20xx to December 31, 20xx.

2. This liability letter shall be made in duplicate, with Party A and Party B each holding one copy.

Signature of Party A (workshop director):

Signature of Party B (team leader):

January 20xx;